Rack'Em Grass Catcher for Exmark Lawn Mower
(13 reviews)
Price: $520.76
In Stock
Rack'Em Grass Catcher for Exmark Lawn Mower
Item # RCMMS4-EXS15
Our Price: $520.76
In Stock
- All Info
- Reviews (13)
- Q & A (0)
- Photos
RackEm Grass Catcher - RCMMS4-EXS15
- Exmark
- RackEm
- Aluminum and Stainless Steel
- 4.4 cu ft
Grass catcher allows you to collect grass clippings while mowing leaving behind a clean, manicured lawn. Custom face plate provides the connection point needed to attach the catcher to your mower. Catcher design is light-weight and easy to handle.
Features:
- Multi-mount grass catcher allows you to collect grass clippings while mowing
- Custom face plate provides the connection point needed to attach the catcher to your mower
- Designed for Exmark lawn mower with 5" discharge opening
- Light-weight design is easy to handle
- Stainless steel and aluminum construction
Specs:
- Capacity: 4.4 cu ft
- Weight: 23 lbs
Note: Your mower's discharge opening must be even with or extend out further than the mower's rear wheel in order to use this grass catcher.
Note: This is not a fit for the Exmark Staris stand-on mowers. It will hang about 2" below the deck of the mower.
RCMMS4 Rack'Em Multi-Mount Bagger - Aluminum and Stainless Steel
RMEXS15 Rack'Em Face Plate for Exmark Lawn Mowers
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- etrailer mistake
Customer Reviews
Rack'Em Grass Catcher for Exmark Lawn Mower - RCMMS4-EXS15
Average Customer Rating: 4.4 out of 5 stars (13 Customer Reviews)
Grass catcher allows you to collect grass clippings while mowing leaving behind a clean, manicured lawn. Custom face plate provides the connection point needed to attach the catcher to your mower. Catcher design is light-weight and easy to handle.by: Steve06/12/2021
Works well with dry grass, but slightly moist grass it will only fill half way.I Install this on my 60 inch ExMark and it kept me very busy emptying it. Grass was about 2 inches longer than normal and it seemed like I was emptying it about every 300 feet of mowing. Combine that with an acre and a half worth of mowing I was doing a lot of emptying and was re-thinking my dumpsite locations. The price didn’t seem bad but after I bought it realize that it didn’t come with the extension piece you have to buy that extra which I would recommend but in combination makes it expensive. The other issue I had with it is the hardware supplied has a pin that is part of the mounting system, and is wearing a flat spot on it only after mowing with it one time. Does a good job catching the grass, but don’t think this is the same thing as a regular grass catching system with a blower, and a big clipping holding system.
by: Jose A08/10/2023
Fácil de instalar. Le quedó perfecto a mi exmark Lazer zero turn
by: John06/12/2021
Dealing with etrailer is great. The RackEm grass catcher for Exmark is horrible. Even with dust cover grass comes out and is everywhere - on me, on mower & on deck. Only 2 screws lined up when installing the handle and faceplate. Waste money & would not recommend this product.
by: Mat R08/09/2020
Well its been a year and I still love the catcher as much as I did on day one. E trailer really is a great company to do business with.
by: T-Team Lawn & Landscape05/08/2021
Fit perfectly and collects leaves and grass clippings great, will be adding more to my fleet..
by: Savvas04/20/2021
Great service. Helped me change my order so I would get it quicker. Same price and same product.
by: Arthur 11/10/2023
by: Troy06/05/2021
EXCELLENT I GOT VERY SERVICE FRONT your co. thanks you
by: Craig 09/11/2022
by: Tony 04/27/2023
by: Tony 04/07/2023
by: Jason 08/18/2022
by: Corey 02/23/2021
13
13
See what our Experts say about this RackEm Grass Catcher
- Needing Rack 'Em Grass Catcher for Exmark Zero Turn MowerWe offer 2 different Rack 'Em grass catchers for Exmark mowers. The catcher you need will depend on if the discharge chute is 4 or 5 inches tall. If it's 4 inches, you'd need # RCMMS4-EXS1 or if it's 5 inches, use # RCMMS4-EXS15. Each catcher weighs right about 30 lbs.
view full answer... - Difference Between Rack Em Grass Catcher # RCMMS4-EXS1 and # RCMMS4-EXS15Measure the discharge opening of your Exmark Viking Hydro and you'll know which of the two grass catchers is what you need. If you have a 4 inch discharge opening you need the part # RCMMS4-EXS1 or if you have a 5 inch opening you'd want the part # RCMMS4-EXS15.
view full answer... - Will Rack'Em Grass Catcher for Exmark Lawn Mower Fit Exmark Quest Zero TurnAs long as you have a 5" discharge opening the # RCMMS4-EXS15 will fit your Exmark Quest Zero Turn. Also, your mower's discharge opening must be even with or extend out further than the mower's rear wheel in order to use this grass catcher. If you find that you have a 4" discharge opening you will need the # RCMMS4-EXS1 instead.
view full answer... - Will Rack'Em Grass Catcher for Exmark Lawn Mower Fit 2019 Exmark RadiusThe # RCMMS4-EXS15 will fit your 2019 Exmark Radius if you have a 5" discharge opening. If you find that you have a 4" discharge opening you will need the # RCMMS4-EXS1 instead.
view full answer... - Which Rack'em Grass Catcher Fits Exmark E-Series MowerI checked with Rack' em and since you have an E-Series Exmark mower the correct catcher is the part # RCMMS4-EXS15.
view full answer... - Correct Grass Catcher for Exmark Metro Walk Behind MowerI checked with Rack'em and the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mowers part # RCMMS4-EXS1 will fit an Exmark Metro with 36" deck. It also fits the models with a 48" and 52" deck.
view full answer... - Does Rack'em Grass Catcher for Exmark Lawn Mower Fit Exmark Laser Z60Yes, the Rack'em Grass Catcher for Exmark Lawn Mower # RCMMS4-EXS15 that you referenced does fit your Exmark Laser Z60 mower deck that you have.
view full answer... - Ex Mark Radius S Grass Catcher FitI checked with Rack' em and the correct grass catcher for your 2021 Ex Mark Radius S Series is the part # RCMMS4-EXS15.
view full answer... - Will the Rack'em Grass Catchers Pick Up Leaves Yes, the Rack'em Grass Catchers like the one for Exmark Lawn Mowers part # RCMMS4-EXS15 can pickup grass, leaves, and other small yard debris.
view full answer... - Can Rack Em Grass Catcher Be Used to Collect Grass Seed with Exmark MowerThe holes in the Rack 'Em # RCMMS4-EXS15 grass catcher are right at 3/16th of an inch. I've done quite a bit of research on Centipede grass seed, and have not been able to find anything definitive regarding the actual size of a centipede grass seed, but it's extremely likely that the seeds could pass through the holes in the catcher if they come loose from the stalk. The catcher will work with an Exmark mower with a 5 inch discharge chute. The mower's discharge opening must be even with...
view full answer... - Is Rack 'Em RCMMS4-EXS15 Grass Catcher Compatible with Chute Blocker on Exmark Viking MowerAccording to Rack 'Em, the chute blocker would need to be removed to install the # RCMMS4-EXS15 grass catcher. I was told that it might be possible to make some modifications to the blocker or the grass catcher in order to get them to work together, but my Rack 'Em representative didn't have any specific details available as to how exactly this would be done. I've linked you to a product description video featuring the # RCMMS4-EXS15 grass catcher.
view full answer... - Which Rack'em Grass Catcher Fits Exmark 60 inch Radius DeckThe Rack'em Grass Catcher for Exmark Lawn Mower # RCMMS4-EXS15 will fit your Exmark Radius E-series 60 inch radius deck.
view full answer... - Rack Em Grass Catcher that Fits Exmark E Series with 48 inch Radius DeckI checked with Rack Em and for your Exmark E Series with the 48 in radius deck the correct grass catcher is the part # RCMMS4-EXS15 that you referenced.
view full answer... - Will Rack'em Grass Catcher for Exmark Lawn Mower Fit 2017 Exmark Radius E-SeriesYes, the Rack'em Grass Catcher for Exmark Lawn Mower # RCMMS4-EXS15 will fit your 2017 Exmark Radius E-series. This is designed to fit the Exmark mowers that have the discharge opening either even with or extends out past the rear wheels and I checked out your mower and it is compatible with that requirement.
view full answer... - Will Rackem Grass Catcher RCMMS4-EXS15 Fit Exmark Mower W/ Operator Controlled Chute Blocker?I reached out to Rack'em and to install the Rack'em Grass Catcher for Exmark Lawn Mower # RCMMS4-EXS15 you were looking at on your Exmark lawn mower you will need to remove the operator controlled chute blocker as it will be in the way of the grass catcher. I included a few videos of the # RCMMS4-EXS15 for you to take a look at.
view full answer... - How Many Bushel Does Rack Em Grass Catcher HoldThe Rack Em Grass Catcher # RCMMS4-EXS15 can hold up to 4.4 cubic feet which converted to bushel is 3.53 bushel.
view full answer... - Which Rack' Em Grass Catcher Fits Exmark Radius E Series 48 DeckYes, the Rack'em Grass Catcher for Exmark Lawn Mower # RCMMS4-EXS15 will fit your Exmark Radius E-series. This is designed to fit the Exmark mowers that have the discharge opening either even with or extends out past the rear wheels and I checked out your mower and it is compatible with that requirement.
view full answer... - Grass Catcher and Mounting Bracket for Toro Grandstand 36 MowerWe have grass catchers for several brands of mower including Toro. For your Grandstand 36 the Toro catcher model to use is # RCMMS4-EXS1 along with Toro bracket kit # RBTORO.
view full answer... - Grass Catcher For Toro Grandstand 40"Yes, the Rack'Em Grass catcher # RCMMS4-EXS15 will fit your Toro Grandstand 40". You will also need the bracket kit # RBTORO.
view full answer... - Exmark Lawn Mower Compatibility with Rack'em Grass CatcherYour Exmark lawnmower will not fit the Rack'em Grass Catcher for Exmark Lawn Mower # RCMMS4-EXS15 because the design is for a 5 inch discharge opening. The # RCMMS4-EXS1 for Exmark is a fit for 4 inch discharge opening. I don't know if there is an adapter for your deck but if you can get one of these two discharge openings then you would choose the correct option and the Extension for Rack'em Multi-Mount Grass Catcher - Aluminum and Stainless Steel # RLES25 will work with either of those...
view full answer... - Rack'em Grass Catcher for Exmark Mower with 5 inch Discharge OpeningThe # RCMMS4-EXS15 Rack'em Grass Catcher is compatible with your Exmark mower with a 5 inch tall discharge opening. This catch will only fit if the discharge opening extends out even with or past the face of the rear wheel. The extension is part # RLES25. You won't need any other adapters as the # RCMMS4-EXS15 is specifically designed for your mower. I've linked to some product videos that you might find helpful.
view full answer... - Rack'em Grass Catcher for Exmark Lawn Mower with 5" Discharge OpeningFor your Exmark lawn mower with the 5" opening you actually just need the Rack'em Grass Catcher # RCMMS4-EXS15. This comes with the carrying handle as well as a face plate for a 5" discharge opening so neither of those would be extra. If you'd like to add an extension we also carry that as part # RLES25.
view full answer... - Grass Catcher that Can be Used with Wright Stander and Toro 52 inch GrandstandSo normally for a Wright Stander mower you'd want the RackEm grass catcher part # RCMMS4-BS2 and for the Toro 52 grandstand you'd want the # RCMMS4-EXS1-TORO. What you could do is use the # RCMMS4 which fits both as the main catcher assembly and for the Toro use # RBTORO and # RMEXS1 and then when using the Wright # RMBS2 with the # RCMMS4.
view full answer...
Do you have a question about this Grass Catcher?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Tyler C
Installed by:
Jeff D
Installed by:
Adam E
Video Edited:
Dustin K
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Manda E
Written by:
Erin H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.