Galley and Cabin Accessories

Hey Eric! The BulletProof Hitches Extreme Duty Coupler Lock #BPH96VR will definitely work with an A-60 style coupler like #DX56FR. I went out to our warehouse and put them together so you can see it in the attached picture. If you need anything else…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

According to the manufacturer, Mini Coopers should absolutely not be flat towed. That said, we have found that as long as it is a manual transmission, it should be good to flat tow. You will void your transmission warranty by doing so. If it already…

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

I can definitely shed some light on some of the confusion. WeatherTech engineers different mat models that are designed for different types of floors - whether carpeted or vinyl. This is because the type of retention for each floor type is different.…

I recommend the Tourney Pro Transom Saver #315-FXJ for your 5'x8' plastic boat. The transom saver is definitely recommended with the lightweight plastic boat you have. With this transom saver you can mount it to the trailer by sliding it onto…

The Peterson Red Round Replacement Lens, #420-15, is not interchangeable with the DZ 77-845 light that you referenced but I may have a solution. For just a bit more than the cost of a lens, you could replace the entire light assembly with the Sealed,…

We do have the Replacement Pull Pin Kit #F500136 which is the part number 18 in the photo you found. We do not carry the part number 4 for the Fulton F2 Trailer Jack #F1413040134 at this time so you may need to replace the parts from another damaged…

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

Boats don't slide as well on bare wood bunks compared to carpeted bunks and typically if theres paint on the bottom of the boat it would be more likely to get damaged. Since you have an aluminum boat you don't have to worry about paint coming…