Quickly siphon fuel without the need for power with this economical fuel transfer pump. Perfect for taking out into the field or if you're stuck on the side of the road. Hook the pump up to your can and start manually pumping to begin the siphon.
Features:
Specs:
We tested the above gas cans using the included adapters and confirmed that this pump should fit cans made by:
This device makes creating a siphon easy; no more holding your mouth up to a tube and inhaling to get the gas flowing. Simply secure the release cap at the top of this pump to create a seal and start manually pumping until you see the liquid starting to flow through the tube. Once the siphon is activated, liquid will continuously flow from your gas can into your vehicle or equipment. Once you're ready to stop the flow, just loosen the release cap that you tightened initially to break the seal and stop the flow of liquid.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Tera Pump Manual Fuel Transfer Pump for your gas cans. Now this is going to attach onto your gas can and will allow you to transfer the fuel from your can to your mower, boat, or ATV. You're not gonna have to worry about funnels or spilling. There's no lift in the can required. Very simple to get this hooked up and so that you can transfer that fuel where you need it.
And this does have this flexible, 26 and a half inch long by 3 quarter inch diameter discharge hose and the 16 and 11/16 of an inch long, 1 inch diameter intake tube that will allow you to work with a variety of container heights. They do also include these 3 adapters to fit most of your North American standard plastic gas cans. Those gas cans are not included but it will be very simple to use those adapters to get hooked up to the gas cans. This is compatible with the Mr. Gasket, the Midwest can, the No-Spill can, the Scepter and the Briggs & Stratton GarageBoss cans.
This is not going to fit your FMD gas cans so make sure it's gonna work for your setup and very simple to get those adapters put on there. Just twist in place and then you'll be able to get them connected to your gas can so you don't have to worry about gas splashing out. You're gonna have a nice, solid connection to your can there. This does also have this locking clip that's gonna secure the nozzle onto the receiving receptacle there. So it's gonna free up your hands to use the pump and then when you're done with it, there is a little spot here that you can attach it so you don't have to worry about it dripping.
The manual siphon mechanism is very easy to use. You just tighten this release cap here at the top, that's gonna create a vacuum. So then you can easily pump and that's going to transfer your liquid from your container up to your boat, mower, vehicle, that sort of thing. And then you can just loosen that cap. It's gonna stop the transfer and break that vacuum seal.
This does allow for up to 3.2 gallon per minute flow rate and so it is going to move that fuel for you very quickly. This is gonna be compatible with your gas, kerosene, diesel, light oils, non-petroleum, non-potable water, your chemical insecticides, soaps, detergents, deodorants, mild acids, antifreeze, and liquid waxes. It's not gonna be compatible with drinking water and the other liquids that you see on the bottom of that graphic on the screen there. So make sure you're using it for its intended purposes to ensure that it's going to hold up well and do exactly what you need it to do. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
Quickly siphon fuel without the need for power with this economical fuel transfer pump. Perfect for taking out into the field or if you're stuck on the side of the road. Hook the pump up to your can and start manually pumping to begin the siphon.
It will work great with my gas cans
So far so good, it is being used for 2-15 gallon jugs as auxiliary fuel tanks for fishing for tuna. The transfer pump has been great to unload directly to the main fuel tank. The only issue is length of hose on the pump side in the tanks themselves is inadequate to fully pump these out but it gets it down to where the fuel left in the tanks is manageable.
Very nice company and right on top of keeping me informed. Would definitely recommend this company
Great product! I had similar type for years and replaced it with this one. Very satisfied customer! Thank you etrailer for this available product.
Do you have a question about this Fuel Transfer Pump?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.