To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Attach accessories to the front of your vehicle with this trailer hitch receiver. Perfect for winches, spare tire carriers and more. Hidden cross tube leaves only receiver visible. Aluminum and steel alloy construction is sturdy and eco-friendly.
Features:
Specs:
The EcoHitch Hidden front-mount trailer hitch is designed to be as inconspicuous as possible. The hitch's cross tube bolts onto your vehicle's frame. No drilling or welding is required. Once the hitch is installed, only the receiver will be visible. This means that your vehicle can maintain its stylish, from-the-factory look, and you won't have to do any major modifications to its body or frame.
With a combination of aerospace-grade aluminum, steel, and stainless steel, each EcoHitch is made of a strong metal alloy that will withstand the test of time. The lightweight alloy is composed of recycled materials. Traditional steel hitch manufacturing can use coal or oil, which can contribute to harmful gas emissions. The EcoHitch's recycled materials limit the carbon footprint during manufacturing, so you get a sturdy trailer hitch while also helping the environment.
This EcoHitch trailer hitch is tested for durability and sturdiness. Using Finite Elemental Analysis (FEA), individual points of stress on the hitch can be detected and remedied. Designers can accurately test the hitch to ensure that it will meet or exceed SAE J684 standards. The EcoHitch Hidden trailer hitch is carefully researched and strength tested for a durable, high-quality hitch that can resist damage while on the road.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Tundra 2022 front tow receiver kit:
Everything was packaged well. There were four washers missing for the bolts that attach to the hitch to the front under the bumper bar. Instructions were great up until the end. Only thing I'd do different is tighten all bolts in the end as there was a 2mm gap between the same mentioned connection above and everything had to be loosened to adjust. Overall the hitch looks awesome, fully hidden specially because of the plate bracket included in the kit to go on when the hitch is not in use. I am ising it for my light duty home plow and it's everything I needed. The site says it's for TRD pro only because pro doesn't have an air dam. But you can install it on any tundra as long as you're willing to get rid of the air dam (front active spoiler) drop down and the motor. And once you do, you'll get an alert on dash that it's not working. I have an SR5 so I removed the motor, took it apart and removed all mechanics from it, only left the motor and mounted it in another location so the code goes away. Definitely recommend this hitch kit if you need it to move trailers or hook up a home plow.
This thing might be built better than than the rear factory receiver! Built like a tank; I love it! My only teeny-tiny complaint, I am grateful that it comes with a tag holder insert. I just wish the insert holder was as wide as a normal tag. Then it wouldn't be necessary to buy an additional tag holder, large enough to hold the entire tag--which will be required to fully support the tag. Still, I would rather have the included insert vs nothing, just some friendly feedback.
Gwendolyn Y.
3/10/2025
Hey Jimmy. I can see what you mean about the plate holder, it would make sense for it to be the side of the plate. But, Glad that you like the hitch! What are you going to be carrying?
Found out my 2025 SR5 crew cab 4x4 tundra had a drop down front spoiler after i received the front hitch. That turned into an issue cause as soon as you unplug spoiler you get lights on your dashboard. So i searched the web and found CBI OFFROAD FAB makes a little plug in device that replaces the spoiler and fakes out the computer to think there is still a spoiler. Was $170 and took 6 weeks to get but it worked. Had to shave off some of there connector to get it to fit in factory connector, but still wouldnt click in so i just taped it good and tie wrapped it up close to top of radiator. Glad i didnt follow hitch install instructions. NOT necessary to remove any plastic bumper or fender well trims. Only things i removed was the front spoiler with motor, small front skid plate, and the frame plugs. I taped up the bumper in the area where hitch will poke thru with painters tape .Found the center from left to right, then i used the horizontal line in bumper for the up and down center. I took the measurements from step 19. Marked 4" to right and 2 1/4" to left. then marked 1 1/2" up and 3" down. Drew my lines to make a rectangle, used a 1 1/8" hole saw to drill out corners. Make sure you drill parallel to ground cause theres multiple layers on bottom. Once holes are in, cut on lines with jig saw trying to keep blade parallel with ground. File edges, put trim lock on and your done with hole. I had about 1/2" trim lock extra so just cut off. Way faster than removing all that plastic. Follow the rest of directions as it says. NOTE, they have 3 different kinds of lock washers in kit. The instructions dont always specify which lock washers to use at certain steps. The split lock washers go on outside of frame, the other 2 kinds go on inside of frame where you cant get a tool in to stop head of bolt from spinning while tightening. Put side plates up first keeping bolts as loose as possible, then lifted center section up into hole of bumper and popped in a few bolts to hold in place while getting rest of bolts in.
Thank you, and sorry for the delayed response. Everything was packaged well and it arrived on time. Thanks to Sarah, for her great service and assistance. Best regards, your Canadian neighbor and friends.
Quality built hitch receiver. Perfect for parking my huge boat dock when I store it for the winter. Highly recommend this product!! 5*****
All good. Cutting the hole in the plastic was the trickiest part - and would be difficult for an inexperienced person.
Do you have a question about this Front Receiver Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
2/11/2025
Hey Kashif. I want thank you for taking and sending in these pics. I know that other Tundra owners will appreciate seeing it actually installed on the truck.