Reese 5th Wheel Trailer Hitch w/ Square Tube Slider - Dual Jaw - 16,000 lbs
(245 reviews)
Price: $813.88
Reese 5th Wheel Trailer Hitch w/ Square Tube Slider - Dual Jaw - 16,000 lbs
Retail:$1,058.27
Our Price: $813.88
You Save: $244.39
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
- All Info
- Reviews (245)
- Q & A (0)
- Photos
Reese Fifth Wheel Hitch
- Sliding Fifth Wheel
- Reese
- Above Bed Rails
- 16000 lbs GTW
- Standard - Double Jaw
- Double Pivot
- 10 Inch Fore/Aft Travel
- 4000 lbs Vertical Load
- 15 - 18 Inch Tall
Fifth-wheel trailer hitch provides excellent jaw-to-king-pin contact with a 2-jaw latching system. Square-tube slider helps to eliminate clearance concerns during slow-speed turns. Rails and installation kit sold separately.
Features:
- 2-Jaw locking system provides more jaw-to-king-pin contact than slide-bar models
- Less rattle
- Greater security
- Square-tube slider provides clearance required for your short-bed pickup to turn safely at slow speeds
- Prevents trailer from hitting the cab of your pickup during sharp, slow-speed turns
- 4-Way pivoting head eases hookup on unlevel ground
- 3" Height adjustment
- Wide stance offers excellent stability
- Black powder coat finish resists corrosion
- Locking handle has cushioned grip
- Above-bed rails and mounting kit sold separately
- Fits Curt, Valley, Draw-Tite, Hidden-Hitch and Reese base rails
- Cut installation time in half by using a vehicle-specific bracket kit instead of the universal kit
Specs:
- Gross towing weight: 16,000 lbs
- Vertical load limit: 4,000 lbs
- Installed hitch height (including rails): 15" - 18"
- Travel: 10" front to back
- Limited lifetime warranty
Note: If using a slider, hitch will not adjust to lowest height setting.
Note: This fifth-wheel trailer hitch will not fit pickups with beds shorter than 6'. It also will not fit trucks with flareside/stepside bed. A minimum 13" extended trailer pin box is recommended.
Secure, 2-Piece Jaw
Unlike the more economical slide-bar models, the rounded, 2-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
Kwik-Slide Square-Tube Slider
Most often used on trucks with 6' beds, this roller helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a roller to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.
30051 Reese Fifth Wheel Trailer Hitch with Kwik-Slide Tube Slider - 16,000 lbs
Item # RP30051
Installation Details
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Arrived Damaged
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Reese 5th Wheel Trailer Hitch w/ Square Tube Slider - Dual Jaw - 16,000 lbs - RP30051
Average Customer Rating: 4.6 out of 5 stars (245 Customer Reviews)
Fifth-wheel trailer hitch provides excellent jaw-to-king-pin contact with a 2-jaw latching system. Square-tube slider helps to eliminate clearance concerns during slow-speed turns. Rails and installation kit sold separately.by: John05/03/2024
Arrived yesterday, box with hitch was broken, UPS driver said he taped it up. All parts look good. Plastic bag with small parts was torn open, 2 small parts missing, I can get them locally. I understand that there heavy Just need to be packaged better. Otherwise all ok.
by: Lisa 03/11/2023
Nice ride with this hitch . I was kind of on the fence about the pivoting but I’m good with .
by: Leroy Nordland06/22/2014
Ordered this hitch for my 2014 Chevy,it came in two boxes and was put together on the work bench in no time at all. and I also ordered the custom rail kit RP50064-58. Just in time for summer camping.
Leroy N.
6/26/2014
By the way I didnt have to cut my heat shield or remove my exhaust pipe when installing the custom rail kit.
Leroy N.
6/22/2015
Great,Just put the hitch in again last weekend ready for the bush and mosquitoes.
by: Matthew06/26/2023
Love the hitch. Hooks up easily and solid. Gives plenty of clearance. Only downside is it’s very noisy and you really feel the trailer. But for the price and weight it’s still 5 stars. Going to go up to a highway payload truck and will be getting the B&W companion for that. Not a reflection of the performance of this hitch though
by: Danny 06/30/2023
I've used this hitch in an 08 f250 and a 15 ram 2500. All I had to do was purchase a set of frame brackets. The fact this hitch can be easily moved among tricks is great. Easy hitching and unhitching. Easy to use. Easily adjust heights. And the slide option being available is great.
by: Ken E.01/22/2017
I purchased the Reese dual jaw slider and install bracket kit. Everything arrived in three days in perfect condition. After watching the install video and reviewing the enclosed instructions I installed the assembly myself. It took approximately 4 hours . As you can see I also did additional steps, cutting the rubber bed mat to fit around the rails. Also undercoating the brackets to blend in the wheel wells. Etrailer is definitely the place to go for all your RV needs.
by: Tate Greenway05/06/2024
I’ve alway used hitches from Reese and enjoyed their performance. This is my first 5th hitch. It broke on the third pull. The rod holding the jaws fractured opening one side of the jaws. Thank God the trailer stayed attached and we made it home. Reese saw it was a warranty issue and replaced the hitch. Currently we are still using it and all appears to be working fine
by: Gregory01/08/2020
Instructions are very good, all parts came with the hitch and were well protected.
This is the first time I've ever put one of these hitches together so I read the instruction thorough.
There was some lubrication that was required.
It took me 1 1/2 hours.
The only thing I can add is when installing the upper handle for the release pin, it had burrs on the inside of the handle and made it difficult to slide onto the tube.
Make sure you check for burrs and deburr before installing. I would still give them 5 stars.
by: Dave W.07/03/2020
I received the Reese 5th wheel 16,000 lb slider hitch from etrailer in June 2019; installed it in July 2019. Took around five hours to install the base rail kit and Reese hitch start to finish. So far so good, this heavy duty slider hitch works flawlessly with my F250/fifth wheel combo. It arrived in multiple boxes, had excellent instructions and an operating manual. For myself and other do-it-yourselfers, etrailer provides excellent support and installation videos to help with the install.
by: David02/04/2023
I bought it used it twice got rid of the 5th wheel. Never again would I own a 5th wheel biggest mistake I ever made
And it's for sale so if you know someone who would want it let me know
by: John W09/24/2019
This hitch has a feature or two we didn't even expect. It was an easy install and is performing great. Plenty of maneuverability and rock stable. etrailer's service was incredible and stayed on top of the delivery until we got it. We thought they went the second mile to make sure we got our hitch.
by: Tom S Garden city mi05/05/2019
Being a first time 5th wheel owner and After researching for the right 5th wheel hitch for my 2011 ext cab chevy Z71 4wd. and the best prices i went with the reese 16 K slider hitch. A must for a 6 1/2 ft bed.
And etrailer had the best price and were very helpful answering all my questions
The hitch arrived in 3 days,
One of the 2 boxes was a little torn up but nothing was damaged,
The instructions were great,and it had more than enough hardware needed for different apps.
I had 2. choices for the mounting brackets,I went with the custom fit not the universal the custom brackets are strong and fit perfect.
I watched a couple install videos online,there were not many on my truck people said you have to cut out your exhaust and your heat shield and drop the gas tank.I did not have to drop my gas tank i just slightly bent down the heat shield to reach above it then pushed it back up.
I used the Allen button head bolt for the left front and had my wife spin the bolt with a long extension and ratchet while I held the nut and washers with a magnet and my finger tips,it was kind of a (pima) and took a little time but way better than dropping my tank.
I did call Reese with a couple questions and suggested to use stronger shipping boxes.
The only thing I had to adjust was the support for the parking brake cable.
I did the hole job on the ground in my yard
This also was a good time I replaced my rear brakes,checked my spare tire psi,and llubed my cable for the spare lift.
Every one was verry nice and helpful from etrailer and Reese.
I wish I was better with computers and could of made a video
Thomas S.
5/11/2020
Still working great.I have room my hitch out a couple times not the railes and it was simple.I am berry satisfied with the hitch and mounting plates i went with.I highly recommend this product.
by: JImmie W.09/19/2015
Ordered the Reese 16K square tube slider on Wednesday and received it on Friday even using the free shipping. That is a remarkable delivery on any product especially a very heavy 5th wheel hitch. Assembly requires only a few basic tools. Took my time and within a couple of hours had it installed and ready to use. Bed rails were already installed.
Jimmie W.
9/18/2016
Have towed my 36 Cedar Creek 5th wheel about 600 miles with the hitch. No problems. Does what it is designed to do. You can spend more if you wish but this is a good solid hitch. Also would recommend etrailer.com to anyone as the place to buy. Keep up your great service.
by: Shelby03/27/2023
Item was great, however twice now the packages have come severely damaged and once items were missing. I think you need to consider better packing on heavy items. because of this I could not give 5 stars.Thank you though for shipping out the missing items quickly without hassle.
by: Doug02/14/2022
I give etrailer 1 star I would like to give them no stars (less than poor) for this transaction. I received this hitch Thursday 2/10/2022 the box was in a very tattered condition. I opened the box on the next day Friday 2/11/2022 it appeared that the box did not contain all of the pieces for the hitch, looking at the box it showed that there should have been 2 boxes, I received box 1 of 2. I called and spoke with someone at etrailer they informed me that UPS had damaged the second box in shipping, and that they had returned box 2 of 2 to etrailer. I was never informed by UPS or etrailer of what had taken place. I never received any notification that the first box had been delivered. The only correspondence that I have received was an email from Carol C informing me that she was notified that my order had been delivered, she also sent me this link for me to write a review. I have been told by the person that I had spoken to that my missing parts to my hitch would be shipped. It is now 2/14 I still have not received any notification of my parts being shipped, or when I will receive them.
Jenny N.
2/19/2022
I will have our customer service team reach out to you.
by: Lincoln 04/11/2024
I needed this in a hurry and it was here in 3 days.very happy
by: Elizabeth R03/03/2020
This is a great hitch. I've been using it for a year now and have had no problems with it.
by: Steven 09/07/2020
Quick delivery hitch required minor assembly it was open box but looked like new. Works great very pleased with purchase.
Steven R.
9/8/2021
After a year of use this hitch is still like new. I am still very happy with this purchase
by: Shane04/14/2019
Overall the product seems to be good quality. The instructions could be a lot more clear. After calling Reese, even the guy on the phone agreed that the spacers provided should be shown as going in above or below the bed. Unfortunately with the size of the U spacers provided, there would be no way to get the nut on the length of bolt sent. Also there were lock washers in the package which the CS rep didn't know what they were for either. Finally, the cotter pins provided are weak, 2 broke already and the handle to adjust the slider didn't have holes drilled for the cotter pin to keep it in place so i just drilled it myself. As a side note, the way the pins lock it in to make it removable, it has quite a bit of play which you can then hear when backing up or starting off.. Using on a Ford F250 2015 6-3/4 bed, pulling a FR 33BHOK (about 11k loaded).
by: Fred Y.04/19/2012
I finally got the hitch installed. Everything went great, thanks again for the great service.
by: Christopher 09/21/2023
The service was good. They shipped it out right away and went only half of my package showed up. I called them in a real person in the US, answered the phone and took care of the issue. I received both packages in my order and I’m very happy. Thank you.
by: Gary C04/11/2017
I'm very happy with the product, service and price. I originally had a used non sliding Reece fifth wheel hitch installed in my 6 1/2 ft. Tundra Bed. It didn't have enough clearance for backing into some spots and my new truck cab got dented ($1,700 repair bill). This sliding fifth wheel is the answer, very easy to install on same bed rails.
BTW etrailer doesn't recommend a non sliding fifth wheel for my truck. Smart.
by: George12/03/2021
The box arrived with an email from your company stating that the carrier UPS had put in a claim for damages. The shipping box was torn open on each end, I did not even try to open the cardboard box for fear I would not be able to send it back. The shipment is sitting on my front porch exactly where UPS left it.
Jenny N.
12/6/2021
I will have our customer service team reach out to you.
by: Earl09/12/2021
This hitch was used and missing parts I waited 3 months for this hitch only to have someone who did not do there job properly !!! it must have been a return and sent to me without inspecting the return it was more than likely sent without inspection /sad my time and my money awaiting the return
Brooke M.
9/22/2021
Thank you for bringing this to our attention. Our customer service team should be reaching out to you in the near future.
25
246
Show More Reviews
See what our Experts say about this Reese Fifth Wheel Hitch
- Fifth Wheel Hitch Options for 2017 Ford F-250 Short Bed with Hitch Prep PackageIf you are looking for a fifth wheel hitch adapter that fits the factory rail kit of your 2017 Ford F-250 short bed we have the part # RP30156 which is a confirmed fit and would work well. It would allow a slider hitch like the Reese part # RP30051 to install. Or we have the Reese Elite Slider part # RP30144 which fits the rail kit directly and does not require the adapter.
view full answer... - Fifth Wheel Rails and Mounting Hardware for a 2001 Ford F-250 Super Duty with 6 Foot BedThe # RP30051 Draw-Tite 16K Fifth Wheel Trailer Hitch with Slider does not include the rails and mounting hardware. You have a couple of options for your 2001 F-250/350, 6 foot bed Super Duty. You can use either the # RP30035 Universal Fifth Wheel Trailer Hitch Installation Kit with Rails or part # RP50082-58 Fifth Wheel Trailer Hitch Custom Installation Kit with Brackets and Rails for 1999-2008 Ford Super Duty. The install kits include the bed-mounted rails, the frame brackets and all...
view full answer... - Will the CURT Q20 5TH Wheel Trailer Hitch Fit in Reese Draw-Tite and Hidden Hitch RailsThe Curt Q5 Fifth Wheel Trailer Hitch, part # C16130 will sit in Reese, Curt, Draw-Tite, and Hidden hitch rails. If you have rails made by any of these manufacturers, the Curt hitch should install without any problems.
view full answer... - Recommended Fifth Wheel Hitch And Wiring Harness For 2013 Toyota Tundra With 6-1/2 Ft BedFor your 2013 Tundra with the 6-1/2 ft bed you will need a sliding fifth wheel hitch so you can execute turns and keep your trailer from hitting the truck cab. I recommend the Reese, part # RP30051. This hitch features a slider and a dual-jaw system. The jaws provide an even connection to the king pin and the hitch also has an indicator that is easily seen to make sure you have a secure hookup to the trailer. This slider has a height adjustment from 15 to 18 inches. This is important...
view full answer... - 5th Wheel Installation Kit for a 1976 Dodge Ram Power Wagon with 6 Foot BedYes, we have an installation kit for your 1976 Dodge Full Size Pickup with 6 Foot Bed. You will need to use the Reese Universal Base Rails and Installation Kit, # RP30035, along with the Reese Square Tube Slider, # RP30051, that you referenced. I have provided a link to the installation instructions and to a video of this kit being installed for you to review. The vehicle is different but the process will be essentially the same. Just be sure to use the the instructions for the Dodge through...
view full answer... - Recommended 5th Wheel Hitch for 2018 Ram 2500 6.5' Bed with Prep for 15K GVWR TrailerThere are a lot of fifth wheel hitch options for a 2018 Ram 2500 and since you have the factory prep package, they all install easily, without any modifications. If you're looking for the best, it's the B&W Companion OEM 5th Wheel Trailer Hitch part # BWRVK3670. It's heavy as hell and sucks getting in and out of the truck bed but it's also bullet proof and the last hitch you'll have to buy. There also isn't anything else out there that can compete performance wise. It has super thick dual...
view full answer... - Where Do Fifth Wheel Rails Set in the Truck Bed of a 1989 Dodge Ram Long BedFor your 1989 Dodge Ram truck with a long bed the recommended distance to mount the rear rail of the Reese kit part # RP30035 is 29-5/8 inches. You would then use the hitch to set the front rail by first setting the rear mounting tabs in the rear rail.
view full answer...
- Compatibility of Reese Hitch With RP30154 Tow Prep Package Puck AdapterThe Reese # RP30154 puck-to-industry standard bed rail adapter provides industry standard rails that would be compatible with 5th wheel hitches from Reese, Draw-Tite, Curt, B & W, Demco, Husky, Valley and others. It'll work great with the # RP30051 Reese hitch you mentioned. The Reese # RP30051 which uses a double jaw that holds the king pin more tightly than a slide bar jaw. The tighter the king pin is held, the better the ride quality. This hitch would also be compatible with the #...
view full answer... - Recommended 5th Wheel Rail Brackets And Hardware For 2008 Ford F-250 4x4For your 2008 Ford F-250 4x4 along with the Reese 5th Wheel Trailer Hitch w/ Square Tube Slider - Dual Jaw - 16,000 lbs # RP30051, you are wise to want new rail hardware and brackets. You will want the Reese Quick-Install Custom Bracket Kit for 5th Wheel Trailer Hitches # RP50082 which will work with standard rails. Then you will want the Replacement Hardware Kit for Fifth Wheel Base Rails - 10 Bolt # RP58430. This will be all he needs for a custom fit to his truck. With the long...
view full answer... - Fifth Wheel Trailer Hitch Installation Kit Recommendation for a 2002 Ford F-150 Short Bed Crew CabIf your 2002 Ford F-150 is a crew cab, but NOT a Super Crew, you will first need an installation kit. I recommend the custom installation kits because they are quicker and easier to install. For your truck, you can use Reese Quick-Install Custom Base Rails and Installation Kit, # RP50042-58. I have included a link to the installation instructions and a link to a video showing a typical installation. With this kit installed, the center of the hitch jaws will be 2-1/2 inches forward of the...
view full answer... - Recommended 5th Wheel Hitch to Reduce Chucking and Jarring for a 2005 Ford F-250/F-350 Super DutyWe have some excellent 5th wheel hitch options that will help to reduce the chucking and jarring with your 2005 Ford F-250/F-350 Super Duty. I have a Curt, a Reese, and one other option for you to consider from Demco. The Curt A16 5th Wheel Hitch, part # C16521, is a very good slider option that uses the 2-jaw system which provides a 360-degree jaw-to-king-pin contact. This will help keep the king pin snug and secure to the 5th wheel hitch. It has a 4 inch height adjustment and is rated...
view full answer... - Determining Max Tow Capacity Of Your Truck To find your truck's towing capacity, subtract your truck's curb weight from its Gross Combined Vehicle Weight Rating (GCVWR). The GCVWR is the maximum weight of your loaded truck and the weight of its attached trailer. You can actually find the towing capacity of your Silverado on the sticker located in your door jamb or on the door on the driver side. Without knowing the year of your Silverado I can't give you any definitive numbers but you'll be able to tow a 5th wheel trailer. I can...
view full answer... - What is Difference Between Pin Weight and Payload Capacity for 2007 Chevy SilveradoSo payload capacity is different from the pin weight capacity of a fifth wheel trailer since payload is basically the weight capacity of the truck bed and the pin weight capacity is the capacity of the frame since the hitch doesn't use the bed as support and attached directly to the truck frame. So you are totally fine to tow your 7,500 lb trailer with your 2007 Chevy Silverado 1500.
view full answer... - Which Sidewinder Wedge Should be Used with Reese Fifth Wheel Hitch # RP30051For your Reese slider hitch # RP30051 the correct Sidwinder wedge would be part # SWW-03. You'll need to keep your hitch slid forward at all times though since you shouldn't activate the slider mechanism of a hitch with a Sidewinder pin box.
view full answer... - Will a Reese 12K 5th Wheel Hitch Fit a 2012 Toyota Tundra with 6-1/2 Foot BedI do have options for your 2012 Toyota Tundra but the Reese 12K 5th Wheel Hitch was discounted in 1990 and will not work with any of the installation kits we have for your truck (including part # RP30035) as they did not use the industry standard rails (ISR). Instead, I recommend taking a look at the Reese 5th Wheel Trailer Hitch part # RP30051 which is a very well made, cost effective option for you. It mounts to bed of your truck with a set of industry standard base rails (ISR) like part...
view full answer... - Recommended 5th Wheel Trailer Hitch for a 1995 Chevrolet C2500 Turbo DieselAccording to my research, the 1995 Chevrolet C2500 models had a towing capacity of 10000lbs, but you will want to check with a dealer to confirm this. If your truck has a 6-1/2 foot bed, I would recommend the Reese 16k fifth-wheel trailer hitch # RP30051, which includes a slider unit. Short bed trucks require a hitch with a slider to get the necessary clearance for tight turns. If your truck has an 8 foot bed, you would not need a hitch with a slider. In this case, I would recommend...
view full answer... - Comparing Reese Base Rails with Inboard and Outboard Installation Kits for 2015 Ford F-150Either base rail and installation kit will work for your 2015 Ford F-150 and your Reese 5th Wheel Trailer Hitch with Square Tube Slider # RP30051. Both kits are custom fit applications that will use pre-drilled holes in the frame of your truck for installation. The main difference between the # RP50087-58 and the # RP56034-53 kits is that the # RP56034-53 kit uses an outboard installation kit versus the inboard installation kit in the # RP50087-58. The outboard installation kit makes...
view full answer... - Reese 5th Wheel Base Rail Installation Kits for 2017 Ford F-150 with 6-1/2-Foot BedThe Reese 5th wheel base rail kit that fits your 2017 Ford F-150 with 6-1/2-foot bed is the Reese kit # RP50087-58. This includes the rails, brackets and hardware and will also accept any ISR hitch and you do not have to drill into the frame to install it. If you need a wiring harness for the truck bed you can use part # 50-97-410-010 which installs simply by just plugging in at the back of your factory 7-way.
view full answer... - Can the Reese 5th Wheel Trailer Hitch RP30051 Replace the Reese 5th Wheel Trailer Hitch RP30047The Reese 5th Wheel Trailer Hitch part # RP30051 and Reese 5th Wheel Trailer Hitch part # RP30047 both use the same industry standard rail spacing so you won't need to make any adjustable to change from one hitch to the other.
view full answer... - Fifth Wheel Rail Kit Recommendation for 2002 Ford F-150 Short BedTo use the Reese slider 16k hitch part # RP30051 that you referenced you'll need a set of fifth wheel rails installed in your 2002 Ford F-150 short bed. For that you'd want the Reese install kit part # RP50042-58. This is a custom install kit that will install in much less time than a universal kit and will minimize frame drilling as well.
view full answer... - Hitch Options for 2021 Ram 1500What I think you are asking for is a hitch to fit your 2021 Ram 1500. What I am uncertain of is if you want a 5th wheel hitch or a gooseneck hitch and for what weight rating and if you have the OEM puck system installed. We have a large selection of Gooseneck and 5th Wheel hitch options for various weight ratings and with varying features. A couple examples being the Reese 5th Wheel Trailer Hitch w/ Square Tube Slider - Dual Jaw - 16,000 lbs. # RP30051 is available but will need an above...
view full answer... - How to Choose the Correct 5th Wheel Trailer Hitch for a 2003 Chevrolet SilveradoThe only part of a fifth wheel hitch that is vehicle specific are the mounting brackets for the base rails. The other important factor to consider when choosing a fifth wheel hitch is choosing a weight capacity that can handle the trailer that you are pulling. If the bed on your 2003 Chevrolet Silverado is less than 8 ft long, then you will most likely need a sliding fifth wheel hitch to add clearance between your truck cab and trailer when making sharp turns. I have attached a link...
view full answer... - Will the Reese 15K 5th Wheel Hitch with Install Kit PS30129 Fit a 2019 Ram 2500The Pro Series 5th Wheel Hitch with Install Kit part PS30129 is not a fit for a 2019 Ram 2500 so there would be no specific instructions for installation. However, you can use the Reese 5th Wheel Trailer Hitch part # RP30051 with the Reese Quick-Install Custom Installation Kit part # RP50054-58 and there will be specific instructions (see attachment). Furthermore, the former option would have required drilling into the frame whereas the latter option does not so this will be a much better...
view full answer... - 5th Wheel Frame Bracket Kit for Reese 15K 5th Wheel Hitch in 2014 Silverado 1500For Quick-Install Custom Frame brackets for your Reese 5th wheel and base rails you can use kit # RP50064. The kit includes brackets and their mounting hardware. You will also need hardware to mount the base rails to the brackets; use part # RP58430. Please note that only sliding 5th wheel hitches like # RP30051 are recommended for your truck due to turning clearance issues that are common with short-bed pickups. If you truck needs a 5th wheel wiring harness for the bed you can use part...
view full answer...
Do you have a question about this Fifth Wheel Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Michael B
Test Fit:
Nicholas E
Test Fit:
Shane H
Video Edited:
Jacob T
Video Edited:
Andrew L
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Lisa
3/12/2024
Fabulous! I love the way it handles. Glad I bought it .