Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Secure this TV mount to the wall in your RV and lower it 16" so that it's at a natural, comfortable eye level. You can swivel it toward the couch for family movie night, and then raise it back up at the end of your camping trip.
Features:
Specs:
Easy to Adjust the TV Angle
When you get to the campsite after dark and want to unwind with a good movie, you can easily adjust this mount so you can view your TV from almost any spot in the room. If you have to keep your TV higher up on the wall, you can still lower this mount down 16" and extend it forward so that it's positioned more naturally at your eye level. At the end of your camping trip, or if you just need to access a storage area behind it, simply just push it back up into place.
And if your RV TV is crammed in a corner, you can swivel the mount 25 degrees in either direction for the perfect view from your couch or recliner - no more craning your neck or missing the best part.
How to Measure Your TV for VESA Mounting Patterns
VESA is an industry standard for measurements given in millimeters used to mount TVs. Most modern TVs use this standard, but you need to know your TV's mounting pattern to select the correct mount. To find this pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.
This diagram illustrates the compatible VESA mounting patterns of this RV TV mount:
If your TV's mounting pattern requires a different configuration, you can use one of MORryde's TV mount adapter plates (MR43ZR - sold separately) to get the right fit. The plates are installed on the mount to adapt for TVs that call for a 300mm x 300mm or 400mm x 400mm VESA pattern. Be mindful of the mount's weight limitations.
Installed this TV mount in my RV over the front storage area between driver & pass seats. (Where the factory installs a tv in every unit) I accomplished 2 things here: I put a 40” TCL Roku tv on the new mount. (up from the 27” factory tv) the TV now pulls down about 18” into a MUCH more comfortable, natural viewing angle. AND it pans left & right, enough so, that someone sitting in the driver or passenger seat can have great view without interfering with others viewing from the sofa, dinette or wherever. THIS mount should be factory, not aftermarket. It’s changed the way we watch tv in our rv so much for the better. When we hit the road, the TV goes up into the top position & locks into place. Ready to travel! The mount is sturdy. The TV weighs 14lbs. The mount is rated for 25lbs i think.
I also stuffed a block of foam rubber on either side behind the tv to silence any rattling while traveling. The larger screen tv may possibly interfere with opening & closing the storage compartments in either side. My storage compartments open & close no problem though with the tv locked upright.
No problem to lower the tv on the mount though, and you’d definitely have access to the storage compartments.
I’ve installed it but havn’t yet RVed with it. Here is what I’ve found thus far.
Arrived well packaged and timely. Appreciated the supplied well equipped good quality bag of hardware (so many times others have shorted me on various screws, nuts and bolts). Total mounting time even with my centering mistake, took about 30 min. I like that in the stowed position the mount extension arms are fully hidden by the TV (mine is a 23” widescreen model). I also like the stowed position latch mechanism and the smooth function of the extension arm shock absorbers. I like the swivel feature feels very secure while the TV is extended. My wife and I really like the new position the TV is in. It now drops down where we can watch comfortably from our recliners! And the the position still allows us to see under the TV out into the camping area just enough if we want to see whats going on outside. Overall it seems like its going to be a durable product and value added upgrade to our RV. Will check back after having RVd about a year with it.
Few tips and observations that may be helpful: 1. If your replacing an existing pullout mount that just pulls out and angles sideways not out and down, attach this new mount exactly in the center of the hole or wherever you are mounting it. Seems obvious but…. my existing mount required the base that attaches to the wall to be offset from centerline… enough said. 2. Extension distances of the TV: Once mounted, while latched, the TV protrudes out from the wall about an inch further than my existing TV. In the fully extended position, the TV is about 10” out and 12” down from its latched position.
Exactly what I was looking for to mount a tv in my toy hauler garage
It's great..we mounted to our RV wall. It is heavy, so we mounted a small painted sheet of ply wood to make sure we hit studs. Then mounted this to the ply wood.
Only thing is the swivel, I wish it had a little more angle viewing. It doesn't swivel very far
Lucy
9/6/2023
Its great! We are on the road a lot for jobs. It locks into place while traveling and so far everything g is good. O e of the best purchases we made for our RV. Thank you!
Mike L.
10/26/2023
Lucy
10/18/2023
Its still great. Best thing we could have bought for the TV in our dinning area. During the dayand travel its up and locked out of the way. In the evening, its diwn to eye level. We love it!!! Thank you!
Mike L.
11/8/2023
One of the mounting bars got bent in shipping. I think I can straighten it. Other than that it came as expected and very promptly
Easy to install and lowers the TV with ease.
Carries a 46” tv in the garage of our toy hauler and we have never had an issue with it coming loose or causing problems during travel days or when set up to camp.
Customer service was very good. The product was very well made and works as expected. I gave it 4 stars because of the instructions. I thought maybe they would be a little more expansive--for different sceneries. Plus, my instruction said to remove a wing nut to separate the back. I couldn't find a wing nut anywhere. Anyway, it's installed and works great.
It's just too heavy to hang on the wall of our travel trailer.
Piece came bent from shipping. We were able to use it, but had to take some tools luckily my husband had to fix it to be able to use it...
While it does a great job for me lowering the tv, getting it to return and latch easily is a whole other matter. Feels like I'm going to break the tv in 2 trying to force it back hard enough to engage.
Well made
Good product and great customer support
I replaced one that did not lower. It was easy.
Do you have a question about this RV TV Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kenny A.
11/26/2022
Amazing!