Loading 3 bikes gets easier when the chocks fit low and the bars have room to clear. These low-profile Moto-Choks and included extender help make the most of your truck bed without giving up tonneau cover clearance.
Not every truck bed has room for tall chocks, especially if you have a tonneau cover. These Low-Profile Moto-Choks keep the front-wheel support lower in the bed while still giving full-size bikes the support they need without changing the way you load them.
These chocks support full-size dirt bikes, dual sports, adventure bikes, and most tire widths, giving the tires the support they need without taking up extra room in the bed or trailer.
This kit already includes a Moto-Chok Extender to create additional handlebar clearance between bikes, but every hauling setup is different. Add a 22-Degree Adapter (ZT52FR) or a Rise/Drop Plate (ZT25FR) to make additional adjustments for your setup.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steven here with etrailer. Let's take a look at our Z-TRAK low profile motor chock bike chocks with extender for three bikes. So folks, loading three motorcycles or dirt bikes and a trailer, as you know, can be challenging, but you're going to need each bike to be held individually without taking up unnecessary space. And you definitely don't want them shifting during transport. So with your Z-TRAK sold separately, that's going to give you a low profile attachment point up in the bed of your truck near the cab.
And with this, you'll be able to clip on these Z-TRAK attachments. And the center one here has an extension as you can see. And that's so that you have a bike here, here and here. The handlebars aren't going to be touching and hitting each other. So that's why that bump out's there.
It's very important. You're going to get two tie down rings with each chock. So the whole kit's going to give you enough again for three bikes. So unlike traditional wheel chocks that require extra tie down tension to keep the bikes upright, these motor chocks are designed to capture the front wheel up to four inches wide. And that's actually going to stabilize the motorcycle during loading.
That way you can tie it down with ease. And they all have built in tie down points on the sides as well. And the fact that they're Z-TRAK, they'll clip on, and you can easily move them around as needed. These brackets I just got loosely put together here, you can change the height, so you can make this higher or lower to fit your specific needs in your vehicle. Again, folks, these work with Z-TRAK or E-TRAK but the Z-TRAK that's sold separately, that's going to be custom for your vehicle.
And you can use the fit guide to find out which track you need to fit your specific need. So again, folks, these are all heavy duty steel. They have a great powder coat finish on them, so you don't have to worry about rust, corrosion, or anything like that as well. Well, that's going to wrap up our quick look together at the Z-TRAK low profile motor chock bike chocks. Have a good one.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.