7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter
Item # HM40975-11933
Our Price: $93.85
Confirmed to Fit
2012 Dodge Ram Pickup
1500 with factory 7-Way
2500 and 3500 Pickup with factory 7-Way
Cab and Chassis
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (53)
- Q & A (0)
- Photos
2012 Dodge Ram Pickup - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter
- Trailer Hitch Wiring
- 4 Flat
- 7 Round - Blade
- No Converter
- Pollak
This 7- and 4-pole connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your Dodge Ram Pickup's OEM wiring system with Chrysler/Dodge OEM plug adapter and bracket.
Features:
- 7- and 4-Pole trailer connector with mounting bracket
- Has high-impact, ABS plastic construction
- Stainless steel spring for easy cover operation
- Rubber gasket provides weather-resistant design
- Mounting bracket for easy, snap-in socket installation
- Black, epoxy-coated steel construction
Specs:
- Application:
- Replaces factory 7-way connector on trucks and SUVs
- Can be used to add a connector to 2003 and newer Chrysler and Dodge pickups and SUVs
- Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep
- Distance between mounting holes (center to center): 2-3/8"
- 1-Year limited warranty
11-933 Pollak OEM Plug Adapter
40975 Hopkins 7- and 4-Way Trailer Connector Socket with Mounting Bracket - Vehicle End
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter - HM40975-11933
Average Customer Rating: 4.8 out of 5 stars (53 Customer Reviews)
This 7- and 4-pole connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system with Chrysler/Dodge OEM plug adapter and bracket.by: Jimmy05/21/2019
1998 Jeep Cherokee
Mounted this on a 1998 Jeep Cherokee XJ with factory towing to replace the 7 pole round socket, the connection into the factory harness was plug and play, perfect fit, bracket easily mounted to my Heavy off road bumper, looks like it belonged there all along.
by: Kirk 09/06/2023
Of course, price matters - and everything is too expensive right now, but what matters more is quality. I appreciate being able to contact someone (you), and get just what I’m looking for. The quality seems completely top notch, and I’m anxious to get this installed and start using it.
by: Inoh08/01/2021
Really fast shipping. Product just as described. The bracket is strong and sturdy.
by: Scott05/29/2018
2017 Jeep Grand Cherokee
Found out I didn't need the wiring harness. The Jeep just plugged right into the back of the 7 way. was done in 7 minutes. Not knowing I didn't need the wiring harness would have save me $45.
by: A,Ramos07/03/2017
2015 Jeep Grand Cherokee
Thanks to the excellent customer service Rep (Nicole T ). I was able to install my trailer hitch and harness with ease. So easy my 7 & 8 yr olds did it. looks great on my 2015 Grand Cherokee limited. we can't wait to mount the bike rack and goooooo! Thank you too much Nicole T.
by: Terry03/04/2021
The kit was easy to replace. I had water intrusion and the connections were corroded. I am now getting the same fault code/warning on my truck a year later. Not sure if this replacement part has water / failed - need to remove once the weather warms up.
Tyler M.
3/4/2021
Hi Terry, Thanks for your feedback! When using these connectors, I would recommend using dielectric grease to help keep contaminates out of the connection points. Using Loctite Bulb, Lamp, and Electrical Connection Dielectric Grease, part LT37534 , will help prevent the corrosion of the connectors.
Helpful Links
by: Greg06/02/2022
This company have been nothing but understanding and professional. I ordered my parts for my new RV and they came through without a hitch. I liked that I could track the package along the way. Keep up the good work y’all
by: Mike C09/09/2017
2017 Jeep Grand Cherokee
15 minute install. High quality craftsmanship. Would highly recommend!!! Incredibly clean install on a brand new vehicle
by: Sean M09/14/2020
Jeep Grand Cherokee
After one year the product is still performing well. The cable provided made it easy to attach it to my stock wiring harness on the Grand Cherokee.
by: William04/22/2019
2018 Jeep Grand Cherokee
My 2018 Grand Cherokee didn't need the wire harness, so it cost me an extra 20 some dollars per part I didn't need, so jeep owners look under and see if you have a round plug in the back with a end cap on. No one tells you what to look for.
by: Bob01/25/2017
2017 Jeep Cherokee
Perfect fit on my 2017 Jeep Cherokee .
Bob
1/30/2018
This Product is working perfect ! Quick and easy installation, Well built to last. I recommend it to all who need to make a connection.....
by: Forrest 03/13/2020
2009 Jeep Wrangler
Perfect for replacing the factory connectors and mount on my 2009 Wrangler JKU
by: Elizabeth 12/21/2022
2012DodgeRam Pickup
The product is great, but it does not compare to your customer service. America’s greatest company! Thanks for all you do!
by: Richard11/23/2017
As advertised, plugged directly into my oem harness.
by: Bryan08/19/2015
Perfect, eliminates the need for adapto rs.
by: Al T04/20/2017
2008 Jeep Wrangler Unlimited
Simple plug for trailer connection, best price & quality I could find!
by: Brian03/16/2013
2012 GMC Sierra
Exactly as advertised! Perfect fit. Made the job easy.
Frank
8/9/2013
Have a 2008 F-250 . Can I just order the 7 pin and 4 pin connector without the bracket and pigtail. Thank you
Patrick B.
8/10/2013
This part is only sold with the harness and the bracket included. This plug will not fit into the factory sockets or mounts for 7-ways. The closes thing we have that might be able to fit your factory opening is part 30955.
by: John 12/02/2016
2015 Chevrolet Silverado 1500
All good speedy shipping thanks so much
John
12/2/2017
All good
by: Gene J01/16/2017
1994 Chevrolet C/K Series Pickup
great. etrailer is always the best.
by: Stevo09/21/2022
1995 Ford F-250 and F-350
Great product
by: Tim 07/12/2022
Delivery was very fast. I haven't had a chance to put the item onto my truck but as far as I can tell there should be no troubles.
by: Frank R.10/15/2016
Have yet to install the product. I simply wanted to compliment the exceptional assistance I received from Anthony who walked me through what I needed. Thank you!!
by: Robert06/22/2021
Makes a nice convenient hook up and protected from damage and weather.
by: Michael03/10/2020
Everything was delivered as expected w/o anything missing, plus nothing broken. Thank you very much for filling my needs.
by: David07/12/2021
Easy to install,great product.
25
53
Show More Reviews
See what our Experts say about this Pollak Custom Fit Vehicle Wiring
- Do You Have the Bracket Separate From the HM40975 ConnectorI am sorry but at this time we do not sell the bracket separately for the HM40975-11933. We do have the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, part number HM40975, available without the plug adapter wiring.
view full answer... - Replacement 7-Way and 4-Way Socket for a 2011 Ford F-150Yes, you can use the socket, # HM40975, from the # HM40975-11933 kit as a replacement 7-way and 4-way trailer connector on your 2011 Ford F-150. The plug-in adapter that comes with this kit is only designed for Dodge and Chrysler vehicles, but you can use just the # HM40975 socket as long as your truck came with a factory 7-way trailer connector. I have attached a link to the socket that should save you some money from having to buy the kit that you referenced.
view full answer... - Will The Hopkins # HM40975-11933 Fit The Factory Hitch Location?The 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933 will fit into the factory hitch location. The factory hitch has the same cut out as the bracket and is a confirmed fit. The bracket makes any aftermarket hitch or a different mounting location an option as well.
view full answer... - Would Pollak 7/4-Pole Trailer Connector HM40975-11933 Connect To Mopar Harness on 2015 WranglerYes, the square connector of the part # HM40975-11933 would attach directly to the square connector of the OEM Mopar wiring harness you have installed on your 2015 Jeep Wrangler Unlimited.
view full answer... - Replacement 7-Way Trailer Connector for 2018 Ram 1500It sounds like you are just looking for a replacement 7-way connector to replace the factory connector on your 2018 Ram 1500, and we have exactly what you need: - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933 This will plug right into your factory socket and work perfectly as a replacement on your truck.
view full answer... - Does Hopkins 7-Way/4-Way Kit # HM40975-11933 Fit 2016 Jeep Cherokee LimitedThe Hopkins 7-way kit part # HM40975-11933 is a fit for your 2016 Jeep Cherokee Limited. If the bracket on the factory hitch matches the opening of the bracket in the picture I attached it will fit and work well but if not you'd want to use the included bracket to mount the connector to bottom of vehicle bumper. No additional wiring would be needed to complete the install though.
view full answer...
- How to Clean the Contact Points of a Trailer ConnectorYou have a few options for cleaning the pins of a trailer connector. You could use a wire brush, some fine grit sandpaper, or even Coca-Cola and an old toothbrush. Coke does a great job cleaning corrosion believe it or not. You'll want to rinse the soda off after though since sugary drinks leave a sticky residue.
view full answer... - No Power To Trailer Running Lights On a 2018 RamThe trailer running light fuse on a 2018 Ram 1500/2500/3500 will be located in the engine bay fuse box, a blue 20 amp fuse in the F29 cavity. If the filament is intact then you will want to test for power on the running light wire behind the trailer connector (usually brown) to see if there is power. If you have power here then replace the trailer connector with the 7- and 4-Pole Trailer Connector Socket part # HM40975-11933. If you don't have power here then there is an issue with the...
view full answer... - Where is the Running Light Fuse for Trailer on 2013 Ram 1500From what I could find, the fuse is in the underhood fuse box next to the battery. Check the yellow 20 Amp fuse in location F29. That should be for the trailer running/parking lights. If I were you, then I would also check the Pink 30 Amp fuse in location F30. That is for the trailer connector itself, so it wouldn't hurt to make sure it is okay as well. There is also a 15 Amp Blue fuse in location F79 for your truck's clearance lights. This fuse shouldn't have any bearing on the trailer's...
view full answer... - Replacing OEM 7-Way/4-Way Connection and Wiring on 2013 Ram 1500 TruckWe have the 7- and 4-Pole Trailer Connector Socket for Chrysler/Dodge OEM # HM40975-11933. It includes both the factory tow harness and OE plug. You will not need to use the bracket included or screws as it will replace the factory plug in the factory bumper on your 2013 Ram 1500.
view full answer... - Recommended Trailer Connector And Wiring Harness For 2014 Jeep Wrangler Unlimited With Tow PackageFor your 2014 Jeep Wrangler Unlimited with factory tow package, I recommend the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933. This kit gives you the wiring adapter you were asking for as well as the trailer connection with both 7-way and 4-way connections you were asking for. This is a confirmed fit for your vehicle with factory tow package.
view full answer... - 4-Way and 7-Way Trailer Wiring Recommendation for 2009 Jeep Wrangler UnlimitedFor your 2009 Jeep Wrangler Unlimited with a factory 4-way trailer wiring harness the Pollak 7-Way and 4-Way part # HM40975-11933 that you referenced would be exactly what you'd need. This will replace the 4-way you have now and give you a 4-way and 7-way.
view full answer... - Troubleshooting No Trailer Brake Lights When Connected to a 2015 Ram 2500You are definitely on the right track, but when I looked up the online owner's manual for your 2015 Ram 2500 the F11 cartridge fuse is actually for the trailer brakes themselves which is a different circuit than the brake lights. For the brake lights you need to look at fuses F53 and F81 which carry the left turn/stop and right turn/stop light circuits respectively. If those fuses look good as well then you need to test the 7-Way connector on your Ram or plug your trailer up to a different...
view full answer... - Replacement 7-Way and 4-Way that Fits 2012 Ram 1500We have the Pollak part # HM40975-11933 which fits your 2012 Ram 1500 and will give you a new 7-way and 4-way that connects to the factory wiring at the rear of the truck. It will just plug into the square connector your old 7-way is plugged into and you'd be set.
view full answer... - Connector on 7-Way For 2012 Dodge DurnangoThere is a harness you can get, but not by itself as you'd also need to get the plug that comes with it. If you're okay with that use the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933.
view full answer... - Replacement Trailer Wiring and Harness Recommendation for 2014 Ram 1500 with Factory 7-WayFor your 2014 Ram 1500 with a factory 7-way the best option we have is the Pollak # HM40975-11933 which gives you a 7 and 4-way connector plus the intermediate harness from behind the connector to the square connector that plugs into your factory Ram wiring. If you needed the harness further up on the vehicle we wouldn't be able to help you with that and only a Ram dealer would have that.
view full answer... - Replacement 7-Way and 4-Way Trailer Wiring Harness for 2016 Jeep Cherokee TrailhawkWe have the part # HM40975-11933 which is a 4 and 7-way that is confirmed to fit your 2016 Jeep Cherokee Traihawk and uses the factory harness.
view full answer... - Do I Need to Have My 2017 Jeep Grand Cherokee Reconfigured When Installing a Wiring HarnessWhen you are installing a wiring harness, like part # HM40975-11933, on your 2017 Jeep Grand Cherokee, you will need to take it to your local Jeep dealer to have them reconfigure the settings on your Jeep for you.
view full answer... - 7-Way Recommendation for 2017 Jeep Wrangler UnlimitedSince you have the factory 4-way and the tow package to swap out to a 7-way would only require the part # HM40975-11933. This will install in place of the 4-way square connector and give you both a 4 and 7-way.
view full answer... - Is Just Harness of Pollak 7- and 4-Pole Trailer Connector Socket HM40975-11933 AvailableYes we do. For just the harness of the part # HM40975-11933 you would want the part # PK11933.
view full answer... - Replacement 4 and 7-Way Trailer Connector for a 2012 Ford F-150The wiring harness that is included with 7 and 4-Way connector # HM40975-11933 is # PK11933 which is designed to fit certain Dodge/Chrysler vehicles. For your 2012 Ford F-150 you would need # HM40975 as a replacement and if you also need the harness that connects to the back you would need # PK11998 which is a hardwire harness.
view full answer... - Installing New 7-Way Harness on 2014 Ram 2500The Pollak 7- and 4-Pole Trailer Connector Socket # HM40975-11933 referenced in your question is designed to plug into the OEM rectangular plug that should be located along the driver's side frame rail above the spare tire. For just the harness by itself you can use part # PK11933. Unfortunately we do not yet have an installation video for this particular harness. If you cannot locate the OEM plug on your truck please let me know and I will be happy to look into this further. If you are...
view full answer... - Will the Draw-Tite Hitch 41948 Fit a 2019 Ram 1500 Classic Warlock Special EditionThe Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41948 is a fit for a 2019 Ram 1500 Classic Warlock Special Edition so long as you don't have a factory trailer hitch. The Draw-Tite hitch offers a complete bolt-on installation with heavy duty towing capacity of 12,000 lbs. If you don't already have a trailer wiring harness, the 7- and 4-Pole Trailer Connector Socket part # HM40975-11933 fits into the factory bumper cutout.
view full answer... - Replacement 7-Way Connector For 2011 Jeep Liberty I do have an option for your 2011 Jeep Liberty with factory tow package but the Hopkins 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket part # HM40975-11933 is not a fit. Instead I recommend Reese Multi-Plug Wiring Harness for Factory Tow Package part # 74682 which is going to plug right into the round factory connector usually located right inside the frame rail at the rear of the Liberty.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Andrew K
Installed by:
Jeff D
Written by:
Tyler C
Video Edited:
Jacob T
Updated by:
Wilson B
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Heather A.
5/30/2018
If you do not need the wiring on your 2017 Jeep Grand Cherokee I recommend part # HM40975.
Helpful Links
Custom-Fit-Vehicle-Wiring/Hopkins/HM40975.html