Product Experts Available Now!
Call 1-800-940-8924
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(2237 reviews)
Price: $387.71
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
In Stock
$387.71
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (2237)
- Q & A (0)
- Photos
TorkLift Truck Camper Tie Downs
Highlights
- Stable, Secure Hauling: Frame-mounted tie-downs spread camper weight evenly for steady handling.
- Damage-Free Install: Bolts to existing frame holes with little to no drilling or truck changes.
- Clean Look When Unloaded: Removable arms leave brackets nearly hidden beneath the truck.
- Rust-Resistant Strength: Black powder-coated steel stands up to weather and road wear.
- Precise Camper Connection: Two anchor holes let you set the best angle for tight, safe hold.
Features to know about
Stable Handling on Long Trips: Frame-Mounted Tie-Downs
These custom rear tie-downs mount directly to your truck’s frame, giving you a solid foundation for your camper. Because they anchor to the strongest part of the vehicle, the camper’s weight is distributed evenly and kept low for better balance. This setup helps prevent sway and keeps handling predictable, even when driving through crosswinds or on rough roads.
Easy Install Without Drilling: Custom-Fit Design
The brackets use pre-existing holes in your frame, so mounting them requires little to no drilling. Everything lines up where it should for a simple bolt-on install that keeps the truck’s structure intact. Once mounted, the tie-downs sit tight to the frame with minimal loss of ground clearance, so you don’t have to worry about dragging when driving over uneven ground.
Clean Look When Not in Use: Removable Arms
When you’re not hauling your camper, the tie-down arms can be removed from their brackets, leaving only low-profile mounts tucked under the truck. That means no bulky hardware sticking out and no hit to your truck’s appearance when you’re running light.
Strong and Weather-Resistant: Powder-Coated Steel Build
Each tie-down is made of black powder-coated steel that resists corrosion from rain, road salt, and debris. The strong welded construction holds up to long-distance travel and heavy use, keeping your camper secure season after season.
Secure Connection Options: Adjustable Anchor Points
Each tie-down arm includes two pin holes so you can extend them to clear sidewalls or fenders and line up with your camper’s anchor points. Two holes in the attachment plate let you fine-tune the angle of the turnbuckles (sold separately) for a solid, stable hold that keeps your camper from shifting while you drive.
T3304 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Item # TLT3304
This Product Fits The Following Vehicles
- 2007 - 2013 Toyota Tundra 5-1/2 Foot Bed - 4WD - no running boards or cab length only boards - factory hitch
- 2008 - 2013 Toyota Tundra 5-1/2 Foot Bed - 4WD - no running boards or cab length only boards - Torklift SuperHitch Hero
- 2012 - 2013 Toyota Tundra 6-1/2 Foot Bed - Double Cab - no running boards or cab length only boards - factory hitch
- 2012 - 2013 Toyota Tundra 6-1/2 Foot Bed - Double Cab - no running boards or cab length only boards - Torklift SuperHitch Hero
- 2007 - 2011 Toyota Tundra 6-1/2 Foot Bed - no running boards or cab length only boards - factory hitch
- 2008 - 2011 Toyota Tundra 6-1/2 Foot Bed - no running boards or cab length only boards - Torklift SuperHitch Hero
- 2013 - 2013 Toyota Tundra 8 Foot Bed - Double Cab - no running boards or cab length only boards - factory hitch
- 2013 - 2013 Toyota Tundra 8 Foot Bed - Double Cab - no running boards or cab length only boards - Torklift SuperHitch Hero
- 2007 - 2012 Toyota Tundra 8 Foot Bed - no running boards or cab length only boards - factory hitch
- 2008 - 2012 Toyota Tundra 8 Foot Bed - no running boards or cab length only boards - Torklift SuperHitch Hero
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Product did not meet expectations
Ratings & Reviews
4.7
2237 reviews
by:
Helmut F.
10/18/2016
Product arrived 10/17/16 as indicated. Will install item my self. Guidelines are clear therefore should be no problem. Shipping time was however longer then expected due to the fact that the item was not on shelf and needed to be ordered. This might be due to the fact that there are probably not that many request for tie-downs which fit the Toyota Tundra Trucks.
by:
Sean
09/26/2021
The front tie down mounts did not fit my 2008 Toyota Tundra SR5 5.7 L V8.The problem is that the bump stops attached to the rear cab mount bolts are in the way. That is something that cannot be removed permanently to accomodate the tie downs. The arm that bolts higher on the frame needs to be bent at a greater angle to fit both the frame and the cab Mount bushing.The rear fit perfectly.
by:
Greg P.
05/16/2015
Second purchase of these torklifts from etrailer. As always, excellent service and super fast shipping. Tie downs are for a 13 Tundra, these mount a lot easier than my Ram 2500.
by:
Wayne
07/23/2021
Easy install. A impact and a 19mm wrench made quick work of this job, overall about 10min per side with OEM hitch
by:
Jason
05/15/2020
Works great. Fits truck. Fast free shipping
by:
Bradley
04/15/2023
Fast shipping, quality product, simple installation
by:
Mark
09/18/2022
Easy to install. Good fit
by:
Fredrick
10/15/2024
Easy install. 30 minutes max
by:
James
07/30/2022
by:
Jack
05/06/2021
by:
John
12/19/2021
by:
Robert
05/27/2025
First, Andy was great to work with and very helpful.
I bought and installed the frame mounted Torklift camper mounts on my 2021 GMC 2500HD Sierra Denali and I’m very pleased with them, they’re stout. As long as you’re mechanically inclined and can follow instructions you should be able to install them yourself without assistance.
I bought and installed the frame mounted Torklift camper mounts on my 2021 GMC 2500HD Sierra Denali and I’m very pleased with them, they’re stout. As long as you’re mechanically inclined and can follow instructions you should be able to install them yourself without assistance.
Gwendolyn Y.
6/3/2025
Install looks great, Robert! Do you already have your camper ready to go for an adventure?
by:
Joe
09/16/2025
I have a 2024 ram 3500 dually stock max tow package.
I figured I’d put pictures up that are of top quality and lighting as most instructions on trailer a vague and generic.
This product fit perfectly and it went on in 15 mins for both sides. ( no rusty bolts to mess with though)
Attached are photos of before and after install and bolt placement.
I figured I’d put pictures up that are of top quality and lighting as most instructions on trailer a vague and generic.
This product fit perfectly and it went on in 15 mins for both sides. ( no rusty bolts to mess with though)
Attached are photos of before and after install and bolt placement.
by:
Mark
06/05/2024
These tiedowns were exactly as advertised and fit my 2023 f350 4wd crew cab perfectly using preexisting holes and mounts. They even came with wire feeders to feed the bolts through the holes on the frame. Instructions were very good and easy to follow. Can adjust the width of tie down and can also drill new holes to customize the width. I highly recommend these.
Mark
6/6/2025
These tie downs are sill working as advertised. I have travelled over 20,000 mi with them in various conditions with about 10 of that time in dirt roads or 4wd roads. Nothing too crazy, but with my camper and these tied downs I am confident that the camper will remain attached and be secure. It hardly moves around at all. They are worth the money and I can still remember how easily they installedvery welll thought out design and installation!
by:
Benoit
09/01/2026
Product was refurbished but sold as new.
Once again etrailer.com prefer to sponsor a YouTube channel the literally insult viewers (BTBRV) than be honest and sell new parts (as advertised)
Once again etrailer.com prefer to sponsor a YouTube channel the literally insult viewers (BTBRV) than be honest and sell new parts (as advertised)
by:
Charles
08/18/2026
great fit, works great, strong parts, works perfect! etrailer was excellent in making sure I received the correct parts. I highly recommend etrailer, if in doubt, call them, don't try and wing it, they will set you up with the correct parts! I will use etrailer again!
by:
Dan L.
07/17/2026
Torklift makes a quality product. This is easy to install. Just watch the etrailer video.
by:
Nick
06/26/2025
For the 2025 Chevy Silverado 1500 6 1/2 foot bed no running boards, Driver’s side bracket does not lineup. It is off by an eighth of an inch or so. Passenger side is fine.
Potentially my truck bed is not the same size or there was an issue with the piece I received. Other than that bolted together very easy to the frame.
Potentially my truck bed is not the same size or there was an issue with the piece I received. Other than that bolted together very easy to the frame.
by:
Monty
07/09/2025
As soon as I ordered it e trailer people went right to work and got this order moving. Awesome
Monty
7/10/2026
Product is working great , what is fantastic is the engineering for the fit to the vehicle and the tools they give you to fish and hold bolts where they need to be during installation. Great thought process for instruction for installation.
by:
Seth
10/23/2026
Would be 5-star if packaged properly to protect the paint from getting beat up in transport. The product itself is great and fits perfectly. Easy to install.
by:
Jennifer
03/21/2021
My brother installed these and he used air tools. The brackets fit perfectly. The instructions were thorough. They bolted right in and the only delay was the disconnect/reconnect of the e-brake cable to install the driver's side bracket (2019 RAM 3500). After all the parts were laid out, he installed all 4 brackets in an hour.
He commented many times on the weight, high quality and PERFECT FIT of these brackets. These are worth the price and made in the USA.
He commented many times on the weight, high quality and PERFECT FIT of these brackets. These are worth the price and made in the USA.
Jennifer
3/22/2022
These are still working perfectly.
by:
Christopher
12/18/2024
I have been very happy with these tie-downs. They are VERY easy to install, require no drilling or modification to the hitch and hide away nicely when the inserts are removed. ~9,000 miles with our camper so far and no issues. These are on a 23 F250 PowerStroke short bed.
Brooke M.
12/18/2024
Yay! Thats what we want to hear! Where all did you get to go in those 9,000 miles?
by:
Okie
11/10/2020
I bought this when my previous belly bar and rear tie-down bent badly when our truck slid off the road into a steep ditch and our camper nearly tipped sideways off our truck. This product is a bit better then my old set up, but I expected something much better for this very high price. It wasn't too tough to install, despite the poorly written instructions. Also, the kit did not include a bolt fisher for the 7/16 bolt. The bolt fisher supplied was for a 1/2 inch bolt. Fortunately I had the correct bolt fisher from a previous project. I am also disappointed that the tie down hole has a slot cut in it which seems would significantly weaken it. I am not optimistic that the tie-down point will not bend or break if we have a similar significant side load such as when we slid into the ditch. I will probably weld the slot in the tie-down point shut to strengthen it.
Floyd D.
11/11/2021
They are starting to rust significantly. That is very disappoint considering the very high cost of these. It is interesting that they dont allow pictures of the product for this update.
by:
Phil
03/15/2026
Awesome product! I purchased TorkLift camper tiedowns (both front and rear) for my 2015 Ford F-350. Installation instructions were easy to follow (pictures were a big help) and the "no drill" made it simple. Tiedowns were extremely solid as the fronts bolted to the leaf spring bracket and the rear to the factory hitch. I highly recommend this product.
by:
Wade
07/01/2026
The best system one can buy for worry free travel. Etrailer communication has been superb.
25
2237
true
Show More Reviews
See what our Experts say about this TorkLift Truck Camper Tie Downs
- Torque Specs for T3304 Rear TorkLift Camper Tie-DownsHey Fred, thanks for reaching out! The hardware for the Rear TorkLift Camper Tie-Downs # TLT3304 need to be torqued to 75 ft-lbs according to my contact at TorkLift. If you're talking about a different kit please let me know.
view full answer... - Recommended Camper Tie-Downs For A 2010 Toyota Tundra Short Bed The HappiJac Truck-Mounted Camper Tie-Downs Item # LC184089 is not a confirmed fit for your 2010 Toyota Tundra because the frame is different and bends in the plates are different on the 5-1/2' beds versus the 6-1/2' and 8' beds. The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2307 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3304 are a confirmed fit for a 2010 Toyota Tundra 5-1/2' bed. You'll also need some turnbuckles to lock down your camper. I recommend...
view full answer... - Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2021 Toyota TundraNo, the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3304 would not be the correct fit for your 2021 Toyota Tundra. The correct rear tie-downs for your 2021 Toyota Tundra are the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3306. We also have the front tie-downs # TLT2310 and turnbuckles # TLS9529-2-LK available.
view full answer... - Will Brophy Camper Tie-Downs # HSSF Fit 2008 Tundra CrewMax 4x4 5-1/2 Ft Bed and Factory HitchThe Brophy Camper Tie-Downs, # HSSF, are designed to be a universal type fit and will work for most pick-up trucks. Unfortunately there is not a specific vehicle list that they will fit so you will have to go by the measurements of the tie downs and the installation instructions to determine if they will work for your 2008 Toyota Tundra. For a custom design that is confirmed to fit your Tundra, take a look at the TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLT2307 and # TLT3304.
view full answer...
- Will TorkLift Camper Front Tie-Downs On 2010 Toyota Tundra Fit 2008 Toyota TundraThe front tie-down for the 2010 Tundra you asked about is part # TLT2307, and the front tie-down for the 2008 is part # TLT2304. I have attached a photo of each on e of the tie-downs and you can see they are designed differently and would not work as you wish. The rear tie-down, part # TLT3304 is the same for both trucks you mentioned and there would be no problem moving those from the 2010 to your 2008.
view full answer...
- Recommended Rear Suspension and Parts Needed for Truck Bed Camper on a 2008 Toyota Tundra 8ft BedI can help you outfit your 2008 Toyota Tundra Limited for your camper. To help with the rear sag of the Tundra, I recommend the RoadActive Suspension # RAS4611TD, because of its adjustability and low maintenance. This kit is compatible with 4 wheel and 2 wheel drive models. There are a couple components you will need for your truck camper to mount to your truck properly one of those components will be Frame Mounted Tie-Downs. The TorkLift Custom Frame-Mounted Camper Tie-Downs for your...
view full answer... - Frame-Mounted Camper Tie-Downs For 2007 Toyota Tundra With 8 Foot BedThere are frame-mounted tie-downs that fit your 2007 Toyota Tundra with an 8-foot bed, though you need to have an OEM or aftermarket hitch like the Draw-Tite # 75527, and your truck cannot have any type of running boards or steps that reach the truck bed. So long as your truck meets those criteria, here are the frame-mounted tie-downs that fit: - Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT2305 - Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3304 The only other...
view full answer... - Recommended Camper Tie-Downs for a 2007 Toyota Tundra Long BedI do have camper tie-downs for a 2007 Toyota Tundra with 8' bed but there are none from HappiJac. Instead, you'd have to go with TorkLift, the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLT2305 for front and part # TLT3304 for rear. The TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs part # TLS9000 (2) can then be used to secure the camper to the tie-downs.
view full answer... - Camper Tie-Down Fit For 2007 Toyota TundraThe Brophy Camper Hold Down # HSSF is a more universal fit style camper tie-down. We unfortunately do not have test fit information on them, and have not had the chance to install them ourselves on a 2007 or same generation Toyota Tundra. We did have a customer purchase the # HSSF for his 2000 Tundra, and he did not have any issues with them fitting over the sidewall of his truck bed. The # HSSF comes with 4 camper tie-downs. We do offer custom fit camper tie-downs for your 2007 Toyota...
view full answer... - Are There HappiJac Frame Camper Tie-Downs for a 2008 Toyota TundraI checked with HappiJac and they do not offer a Frame Mount Tie-Down System for a 2008 Toyota Tundra but I do have an option available for you in the TorkLift Custom Frame-Mounted Camper Tie-Down System. The correct parts numbers for this will depend on options such as bed length, drive type, and hitch type. I have attached a few examples below. 5-1/2' Bed, No Steps, 4x4, Factory Hitch - part # TLT2307 front and part # TLT3304 rear 6-1/2' Bed, No Steps, Factory Hitch - part # TLT2307 front...
view full answer... - Will TorkLift Camper Tie Downs for a 2013 Toyota Tundra Require DrillingThe Torklift Tie-Down Kit part numbers # TLT2305 and # TLT3304 have been confirmed as a fit for your 2013 Toyota Tundra with an 8 foot bed, double cab, without running boards, and a with factory hitch. Since these are a custom fit application there would not be any drilling involved either.
view full answer... - Recommended TorkLift Camper Tie-Downs For 2007 Toyota Tundra 4WD With 8 Foot Bed And Factory HitchFor your 2007 Toyota Tundra 4WD with 8 foot bed and factory hitch, we have the camper tie-downs you need. For the front tie downs, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2305. For the rear, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3304. These are confirmed to fit your truck. You may also be interested in the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000 or the TorkLift Locking FastGun...
view full answer... - Where Does Torklift Camper Tie Downs TLT3304 Attach on a 2012 Toyota TundraThe bolts used for the install of the part # TLT3304 that you referenced are shown in the picture I attached. They are near the rear bumper but they do not hold the rear bumper. The bolts do get reused though.
view full answer...
- Recommended Camper Tie-Downs for a 2008 Toyota Tundra with Step BarsIn regards to frame mounted camper tie-downs, so long as the steps/boards don't extend past the cab then you'll be fine. It's hard for me to make an exact recommendation without more info on the truck but the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLT2304 and part # TLT3304 for example are a great option for models with a 6-1/2' bed. They can be paired with the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs part # TLS9529-2-LK to complete your setup. I...
view full answer...
Do you have a question about this Truck Camper Tie Down?
Info for this part was:
Written by:
Lindsey S
Installed by:
Jeff D
Installed by:
David F
Expert Research:
Jameson C
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Helmut F.
10/19/2017
After I installed the tie-down on my Tundra on my own, thanks to the clear and easy to understand instructions I drove many miles on Fwys, mountain roads etc. . The best of all, I am clearing the back bumper the way it should. The springs are fantastic. I feel save to have the ForkLift on my camper!!!! Thanks for a great product.