Get a better view of the skiers or tubers behind you with this large, convex rearview mirror. Ball-and-socket knob lets you adjust the mirror position as you see fit. Non-scratch windshield mount clamps onto frames from 3/8" to 1-1/4" wide.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody it's Ajay with etrailer.com. Today we're going to be checking out, this clamp on rear view mirror for your boat. It's going to go on the frame of your windshield. This is from CIPA. It's going to tighten down with these hand knobs. So it was really easy to put on there and take off when you want to remove it, and you don't have to do anything permanent and mount it anywhere.
Let's check it out. Looking at the mirror itself, you're going to have 13 and a half inches wide and six and a half inches tall of mirror to work with also has a ball and socket on the back for that extra maneuverability, and in the mirror it's going to be convex. So it's going to seem like things are further away, but you have a wider view than you would if it was just flat glass. They have two knobs on the back for adjustment. You can loosen this one and that'll move it, down and back wherever you need to adjust it to, tie it back up, that keeps it in place.
This one's going to loosen, it's a little bit just that's that ball and socket just makes it easier to move that around and get that adjusted. Looking at the bottom, this is how it's going to attach when to loosen the hand knob here and it's going to loosen this clamp, that's putting pressure on the frame of the windshield. So as I loosened that, I could remove it and show the inside. There's going to be three different spacers that comes with to help you close that gap around that frame so that when you just slide it into place, you don't have to tighten down as much. So just a couple turns.
And it's going to make contact, and keep it nice and secure. Now the windshield frames it's going to work with is going to be anywhere from the widths of the three eights to an inch and a quarter. The whole backside is covered by an ABS plastic, so you don't have to worry about the elements getting to it. It's not going to rust or corrode on you, when you leave it on your boat. Overall, I think this would be a great addition to your boat.
It's far better than turning your head back there all the time. If you're pulling people behind you, you can just look here, in the mirror and not spend so much time looking behind you. Plus, you can adjust it and remove it whenever you don't want it on there. So you can keep it working for a very long time. Well, thanks for hanging out. I hope this helped..
Average Customer Rating: 4.8 out of 5 stars (19 Customer Reviews)
Get a better view of the skiers or tubers behind you with this large, convex rearview mirror. Ball-and-socket knob lets you adjust the mirror position as you see fit. Non-scratch windshield mount clamps onto frames from 3/8" to 1-1/4" wide.
Very well made, solid fit to windshield and easily adjusted. As always great same day shipping and great service.
Good product, good service. I wouldn't hesitate to order from etrailer.com again.
Looks like a very well made product. I will see how it fits on my ATV can tomorrow which will work out very well time wise. 5” of snow is predicted . I think it will be great!
Mirror was great for about 10 uses and then after that the knob has stripped out and I can no longer securely attach this to my window. If you don't plan on removing this mirror after each use then this will be a great mirror.
I thought the mirror is very nice, came the day after I ordered it. It was a Christmas gift hopefully will fit well on the boat-- he thought it might be to big. I told him too it is a big boat. we will see in the summer
Solid product fast delivery. Strongly recommend
I looked around quite a bit before finding the right product on your website. Very pleased with your company, service, and selection of products!
This is a very well made mirror. It should be perfect for my needs.
The staff was very easy to deal with and shipping was fast part was delivered package very nice.
Product delivered quickly and as advertised. Very satisfied.
Review from a similar Comp in Boat Mirrors
Have been looking for a rear view mirror for my 2018 New Holland Farm Tractor for weeks I have purchased 2 mirrors from two different suppliers and neither would mount properly on the roof of my tractor! After searching the net I came across your marine site and found the perfect mirror! Mounted it this am and it absolutely what I wanted! The quality is so much better than other’s thanks for having what I needed
Review from a similar Comp in Boat Mirrors
Really happy with this huge mirror. Easy to install, stays put and adjusts where you need it. I can see everything, even when pulling 4 skiers I can keep track of them. Folds down below the windshield frame when trailering as well.
Review from a similar Comp in Boat Mirrors
Just got it. Really clear and well made. I'm sure it will be a nice addition.
Review from a similar Comp in Boat Mirrors
So impressed by this company! They were able to deliver my product before Christmas. Thank you!
Review from a similar Comp in Boat Mirrors
I was totally happy with the lady taking my order, She was very knowledgeable, very respectful, . She explained every thing including price, delivery status. Best thing I got exactly what I wanted and ordered. I rate this workmanship and all around service a ten plus. A very satisfied client
Review from a similar Comp in Boat Mirrors
Great product and fast shipping! Thank you etrailer. I have a great view of my kids tubing and wakeboarding now! Attaches nicely and firmly to windshield. Easy to mount and remove. Five stars for product and etrailer!
Review from a similar Comp in Boat Mirrors
This was exactly the mirror that I've been searching for. The materials used for the mounting hardware are metal, not flimsy plastic. Mounting to my Sea Ray winshield was very easy. I could see my skiers and their hand signals for the first time. There was no vibration and once mounted, it stayed in place. If you are looking for a great mirror for your boat, this is the one to get. You won't be disappointed.
Review from a similar Comp in Boat Mirrors
My ordering experience was excellent, customer service (Ashley) was knowledgable and polite. The product I received was high quality and will be ordering again from etrailer.com.
Do you have a question about this Boat Mirror?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.