Filter Products
Filter by Type of Mirror
$18.80 - $187.19
Videos
for Boat Mirrors
Help Articles
for Boat Mirrors
Expert Answers
for Boat Mirrors
Hi Dustin, The Aluminum AM03 Series Black Machined Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 #AM43NR does not come with the valve stem, but we do have one. I reached out to the manufacturer, Americana, for you and they…
view full answer...Without a key number it is going to be impossible to find replacement keys for the other doors. DB isn't a designation that identifies the lock brand or the corresponding key. Since you have a Southco for one and what sounds like a…
view full answer...Yes, you can replace your load range C tires with load range D tires without issue. It will only become any issue when you go down load ranges, not up. The tires will have the same overall diameter as long as they are the same size regardless of…
view full answer...Typically higher load ranges of tires means higher capacity and a higher max PSI. For example the Loadstar ST175/80D13 Bias Trailer Tire Load range D part #AM1ST77 has a maximum load rating of 1,610 lbs at 65 PSI. While the same tire in load range…
view full answer...We do offer a black Rearview Boat Mirror from CIPA, part #CM11080, which clamps to windshield frames from 3/8-inch to 1-1/4-inch wide (or it can be permanently mounted). This convex mirror's face measures 4-inches high x 11-inches long for…
view full answer...The CIPA Rearview Boat Mirror part #CIP54FR will require the CIPA Mirror Bracket for Boat Windshield part #CM02310 for installation. If you're looking for a suction cup mounted mirror then I recommend the CIPA Rearview Boat Mirror part…
view full answer...In regards to the CE Smith Outboard Motor Dolly part #CE27580, the mounting board measures 16-1/8" long x 1-1/2" wide. which you can see in the photo attached below.
view full answer...Since you are limiting your trailer to 10000lbs, and the average tongue weight is 10-15% of the trailer weight, you are looking at 1000-1500lbs tongue weight. With that said it is a good idea to use a jack with a larger capacity as it will be able…
view full answer...Without a key number there isn't a way unfortunately. It would be nice if they put the key number on the latch somewhere but they do not do that. You would need to replace the slam latch with part #BA57FR.
view full answer...Trailer wheel and tires are not balanced typically which is why our wheel and tire combos like the part #AM31990 are not balanced. It doesn't really end up making a difference so we don't recommend it either.
view full answer...Our trailer wheel and tires like the Kenda Karrier part #AM31990 that you mentioned do not come balanced. We do have balancing beads that you can use that will balance them for you like with the Counteract part #CA66VR which comes with enough to…
view full answer...You're correct. A 6 on 5-1/2 inch bolt pattern will have 6 lugs with a 5-1/2 inch bolt circle. That means that if you measure from the center of one bolt across the hub to center of the opposite bolt, that distance will be 5-1/2 inches.…
view full answer...