# 1
Curt Class II Drawbar - 3/8" Rise, 1" Drop - 7-13/16" Long - 3,500 lbs
The hitch works great and it was delivered FAST. I was very happy with the purchase. It was cake to install.
# 2
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
It looks tiny compared to other hitches, but is solid metal. The welds are fine and fits like it should. A necessary item for the trailer hitch.
Everything fit perfectly on my 2000 Subaru Forester and is still working a year after installation. I use the trailer every week.
# 3
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
I purchased a Curt class II hitch for my wifes subaru. I recieved it right away and the installation was a breeze. There was a simple little piece of two sided tape missing from the light wire kit. I called etrailer and George sent it to me that day. Service after the sale is what makes a good company great. I couldn't be happier. Thanks alot etrailer!
# 4
Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
Every Item I have ordered from etrailer.com has been top of the line . Easy ordering , prompt service , and excellent installment instructions . I watch the video , more than once , and follow the expert's direction . I wouldnt order trailer parts anywhere else . Thank You
I believe my choice, with the help of etrailer, of this Draw-Tite trailer hitch receiver, along with a few other items to go with it, such as the drawbar, hitch ball and wiring harness, was a good one for my 2017 Subaru Forester. I also have to compliment etrailer for their excellent video on how to install it. All together, it really made the purchase very easy and smooth. Thanks etrailer.
# 5
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
This got installed on my wife's Forester and we have used it several times for pulling a utility trailer and also for pulling our dock and raft at our camp. Very happy with the options it offers for moving more than fits in the car. Since the Forester had the dual exhaust, i did cheat and have my mechanic do the install. He did it within the hour that is advertised, but did say it would have been a bit of a challenge working at ground level. I think I still ended up paying less in total than going to a hitch installer overall, very happy with the hitch, wiring harness, and drawbar. It's especially nice to have the harness tucked away, as it doesn't get used that often.
# 6
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
Absolute breeze to install.
# 7
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
# 8
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
This drawbar was clearly used. See the picture. I asked etrailer about it and sent this picture but the person that replied, Noah, thought it must have been bumped around in shipping. If shipping caused this much damage, it's a poor quality product. If it was, in fact, used, then etrailer lied to me. Either way...not good.
Perfect hitch for my 2015 Subaru Forester. Put the ball in the right place!
# 9
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.
# 10
Curt Class II Euro Style Drawbar with 2" Ball - 2-3/4" Rise - 3,500 lbs
I like that this design keeps trailers level rather than pitched forward for my 2007 Subaru Forester. Seems incredibly strong because of its weight and being one piece.
This hitch has worked perfectly on my Subaru for over a year now. Last summer I pulled my tear drop trailer around the country with no problems and the finish on the hitch still looks like new. I would recommend this hitch to a friend.
# 11
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Item shipped fast and exactly as described. No hesitation in ordering again from this company. Thanks.
# 12
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
This hitch has worked perfectly on my Subaru for over a year now. Last summer I pulled my tear drop trailer around the country with no problems and the finish on the hitch still looks like new. I would recommend this hitch to a friend.
I like that this design keeps trailers level rather than pitched forward for my 2007 Subaru Forester. Seems incredibly strong because of its weight and being one piece.
# 13
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.
This drawbar was clearly used. See the picture. I asked etrailer about it and sent this picture but the person that replied, Noah, thought it must have been bumped around in shipping. If shipping caused this much damage, it's a poor quality product. If it was, in fact, used, then etrailer lied to me. Either way...not good.
# 14
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
# 15
Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
This hitch has worked perfectly on my Subaru for over a year now. Last summer I pulled my tear drop trailer around the country with no problems and the finish on the hitch still looks like new. I would recommend this hitch to a friend.
I like that this design keeps trailers level rather than pitched forward for my 2007 Subaru Forester. Seems incredibly strong because of its weight and being one piece.
# 16
Reese Trailer Hitch Starter Ball Mount Kit
I needed an very specific ball mount(class I, 1/2" rise, 2" ball). etrailer had what I needed in stock and available to ship next day. I had the thing ordered in 60 seconds. Wish I wouldn't have waisted my time and gas shopping at my local hardware stores only to find they didnt have what I needed.
# 17
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.
This drawbar was clearly used. See the picture. I asked etrailer about it and sent this picture but the person that replied, Noah, thought it must have been bumped around in shipping. If shipping caused this much damage, it's a poor quality product. If it was, in fact, used, then etrailer lied to me. Either way...not good.
# 18
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
# 19
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 6-3/4" Long - 3,500 lbs
# 20
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
Quality parts, but the extra rise with this and the Curt Rocker Ball still wasn’t enough to avoid scraping the top of my inclined road while towing my boat.
What our customers are saying:
"very easy to shop"