# 1
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Very satisfied with the customer service at etrailer....some research had to be done and the .representative came thru..the camper tie downs were what we needed
# 2
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Fits fine on the 2020 Toyota Tundra. I would suggest one change, though. It is rather difficult stringing the bolt through with the coiled wire without losing it inside the frame before getting the nut on. Therefore, I squared the ends of the bolts, drilled a hole through the square end, and twisted the wire through the hole. This made it so I could easily pull the bolt through the hole and hold the bolt in place while sliding the nut and washer down the wire to the bolt and screwing it on it. Pretty much impossible to lose. The square end also made it easier to hold the bolt while tightening down the nut.
Missing most of the hardware.
# 3
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Fits fine on the 2020 Toyota Tundra. I would suggest one change, though. It is rather difficult stringing the bolt through with the coiled wire without losing it inside the frame before getting the nut on. Therefore, I squared the ends of the bolts, drilled a hole through the square end, and twisted the wire through the hole. This made it so I could easily pull the bolt through the hole and hold the bolt in place while sliding the nut and washer down the wire to the bolt and screwing it on it. Pretty much impossible to lose. The square end also made it easier to hold the bolt while tightening down the nut.
Missing most of the hardware.
# 4
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Fits fine on the 2020 Toyota Tundra. I would suggest one change, though. It is rather difficult stringing the bolt through with the coiled wire without losing it inside the frame before getting the nut on. Therefore, I squared the ends of the bolts, drilled a hole through the square end, and twisted the wire through the hole. This made it so I could easily pull the bolt through the hole and hold the bolt in place while sliding the nut and washer down the wire to the bolt and screwing it on it. Pretty much impossible to lose. The square end also made it easier to hold the bolt while tightening down the nut.
Missing most of the hardware.
# 5
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
Great product and excellent transaction. The service was great and very fast shipping.
Fits well on a First Gen Tundra. I was extremely unsure about fitment for my truck but they work great! Install only takes 5-10 minutes. I would definitely recommend. Steel is quite thick and seems very strong.
# 6
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Product is very sturdy and easy to install. Fits 2005 Tundra.
Product is as advertised, and arrived in record time. Great retailer, great service. Thanks.
# 7
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
These tie downs worked great for my Toyota Tundra. I was securing a light weight camper.
Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch
# 8
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
Kit came early, installing it this weekend thanks to Brian for the prompt response on the emails
# 9
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
It does fit a 2021 tundra 8’ bed!!! 19 mm box wrench needed for installing Drivers side.
Fits fine on the 2020 Toyota Tundra. I would suggest one change, though. It is rather difficult stringing the bolt through with the coiled wire without losing it inside the frame before getting the nut on. Therefore, I squared the ends of the bolts, drilled a hole through the square end, and twisted the wire through the hole. This made it so I could easily pull the bolt through the hole and hold the bolt in place while sliding the nut and washer down the wire to the bolt and screwing it on it. Pretty much impossible to lose. The square end also made it easier to hold the bolt while tightening down the nut.
# 10
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Very satisfied with the customer service at etrailer....some research had to be done and the .representative came thru..the camper tie downs were what we needed
# 11
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Fits fine on the 2020 Toyota Tundra. I would suggest one change, though. It is rather difficult stringing the bolt through with the coiled wire without losing it inside the frame before getting the nut on. Therefore, I squared the ends of the bolts, drilled a hole through the square end, and twisted the wire through the hole. This made it so I could easily pull the bolt through the hole and hold the bolt in place while sliding the nut and washer down the wire to the bolt and screwing it on it. Pretty much impossible to lose. The square end also made it easier to hold the bolt while tightening down the nut.
Missing most of the hardware.
# 12
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
The hardest part of the installation was removing the frame bolts from the truck that are reused. The instructions were clear and easy to follow, and each piece fit perfectly where it was supposed to go. You don't need to be a mechanic to get these installed, but the proper tools are a must, along with a good chunk of an afternoon.
All parts arrived in good condition. The Torklift part you recommended was the exact fit, installation went well.
# 13
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Fits fine on the 2020 Toyota Tundra. I would suggest one change, though. It is rather difficult stringing the bolt through with the coiled wire without losing it inside the frame before getting the nut on. Therefore, I squared the ends of the bolts, drilled a hole through the square end, and twisted the wire through the hole. This made it so I could easily pull the bolt through the hole and hold the bolt in place while sliding the nut and washer down the wire to the bolt and screwing it on it. Pretty much impossible to lose. The square end also made it easier to hold the bolt while tightening down the nut.
Missing most of the hardware.
# 14
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Very satisfied with the customer service at etrailer....some research had to be done and the .representative came thru..the camper tie downs were what we needed
# 15
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
At the moment I have yet to install the tie-downs. However they arrives when etrailer stated and the boxes were in excellent condition. I expect to use them this weekend to pick up my new to me slide in truck camper.
Delivery came early and the box had all the parts . I still have to install the tie downs but seem pretty straightforward process
# 16
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
I put these on my F250 for when I carry my Northstar Camper and they have made an enormous difference, especially in sway. They work!
You should make the front angles a little longer for the top of the frame of the truck but thank you very much all done
# 17
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
I am extremely happy with this setup. Installation *could* be done by a single person, but would involve A LOT of figuring out special approaches to holding things in place for alignment and tightening. But I had a friend help me and installation went about as perfectly as one would hope for. I have used the oriduct for multiple trips, sone of which were on washboard gravel and dirt roads, and the setup has worked perfectly. My truck camper is a popup and pretty light, and the setup holds the camper in the truck very nicely. I suspect it would work very well even for heavier and larger truck campers, as well. I called support before ordering and was provided with perfect information in a very professional and caring manner. I am 100% satisfied, and highly recommend both this product and etrailer as a company.
I use this in A 2007 Silverado 1500 Classic with a 6.5-foot 1996 Lite Craft. Works great, and it was easy to install.
# 18
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
First of all, etrailer was amazingly communicative in the delivery process, which was greatly appreciated. And these tie downs were such a straight-forward installation. Start to finish, I would 100% buy from etrailer again! Highly recommend.
The tie down kit is very high quality, and the installation instructions were spot on. Our truck is in mint condition and I wanted a tie down system that was low profile, and did not take away from the looks of the truck when camper not on it. I've not used the turnbuckles yet, but they are set up ready for work and look great.
# 19
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Fits fine on the 2020 Toyota Tundra. I would suggest one change, though. It is rather difficult stringing the bolt through with the coiled wire without losing it inside the frame before getting the nut on. Therefore, I squared the ends of the bolts, drilled a hole through the square end, and twisted the wire through the hole. This made it so I could easily pull the bolt through the hole and hold the bolt in place while sliding the nut and washer down the wire to the bolt and screwing it on it. Pretty much impossible to lose. The square end also made it easier to hold the bolt while tightening down the nut.
Missing most of the hardware.
# 20
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Very satisfied with the customer service at etrailer....some research had to be done and the .representative came thru..the camper tie downs were what we needed
What our customers are saying:
"great people to do business with, great communication and fast shipping!"