TorkLift Camper Tie-Downs - Custom Frame Mount - Front
(1509 reviews)
Price: $465.45
In Stock
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Item # TLT2310
Our Price: $465.45
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (1509)
- Q & A (0)
- Videos (1)
- Photos
TorkLift Camper Tie-Downs - TLT2310
- Front Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with rear tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing camper's weight evenly and lowering its center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 front tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
T2310 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
This Product Fits The Following Vehicles
- 2017 - 2021 Toyota Tundra 6-1/2 Foot Bed and 4WD - Double Cab - without board or step underneath truck bed and with a factory installed hitch
Video of TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for TorkLift Front Frame-Mounted Camper Tie-Downs Review
Speaker 1: Today, we're going to be taking a look at TorkLift's line of custom frame mounted camper tie downs for the front. You want to verify here at etrailer.com using our fit guide, which ones work best for your vehicle. There are sets also available that will fit your vehicle available for the rear. These custom mounted brackets are going to provide an easy attachment point to hook up your camper.What's additionally great about those is that they have the removable ends. So when you're not using it, they'll be hidden away, and your vehicle will look like factory. The custom mounted brackets we're engineered to provide you with the best location for your tie down point to even distribute the load.
So, once they're attached, and adjusted. This'll keep your camper from being too top heavy. This'll increase the overall ride quality while you're campers attached, and the safety. It's made of a durable steel with a black powder coat finish, which'll ensure that you have a strong attachment point, and it'll be highly resistant to corrosion.When you are ready to use them, you can just slide in the attachment point. There's two points here to attach your turn buckles, and here on the shaft there are two points that will give you an adjustment inward, and outward, to specifically fit your camper.
So, you can use this hole for a wider camper, or this hole for an aero camper. Once you've got your appropriate hole, slide the pin through, and bring the latch over, and lock it in place. Then you can attach your turn buckles.Now if you need some turn buckles you can pick them up here at etrailer.com. There are many a different styles. From chain types, to quick attach lever types.
Our style is going to a be a threaded rod type that will hook to your camper, and down to our attachment point. We'll adjust it snug by turning our turn buckle here. With our passenger side done, we'll repeat that same step on our driver's side.Compared to stake pocket, our bumper mounted camper tie downs, frame mounted tie downs will provide better handling. They also mount out of sight, giving your truck a cleaner look, because the custom fit brackets secure tight against your trucks frame there is no loss of ground clearance. That completes our look at TorkLift's line of custom frame mounted camper tie downs for the front..
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Front - TLT2310
Average Customer Rating: 4.7 out of 5 stars (1509 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Paul04/14/2021
The rear camper mounts took 10 minutes each to install. The front ones took 22 minutes each. The mounting brackets are well built and designed. It would have been nice if the install instructions we’re online so we could have read them before we received the mounts.
by: Hal09/09/2020
TorkLift frame mounted tie downs are awesome. Just installed them today on the new Tundra and they are impressive. I have used Happijac tie downs in the past and they work and do the job. I wanted something a little beefier and TorkLift is definitely what I was looking for. Fairly straight forward install, takes a little tinkering but the fit is perfect and there is no doubt TorkLift did their homework. Great quality steel and welds look good. Great work TorkLift! Ordering from etrailer is always easy and they seem to have customer service dialed. They have better information on their site than most manufacturers.
by: Eric H07/20/2020
This was a perfect fit on my 2017 Tundra. Installation took about 30-45 min per side. The most difficult step was threading some bolts through the frame holes. They hide nice when not in use.
by: J In Tucson04/10/2020
I installed these on my 2018 Toyota Tundra myself. As advertised, they fit into existing bolt holes and installation was straightforward. My slide-in camper attached as advertised and the unit has been trouble free through some rough off road travel.
I recommend this item highly and prefer it to my previous camper tie down system.
by: Robert 12/31/2019
2019 Toyota Tundra
Fits fine on the 2020 Toyota Tundra. I would suggest one change, though. It is rather difficult stringing the bolt through with the coiled wire without losing it inside the frame before getting the nut on. Therefore, I squared the ends of the bolts, drilled a hole through the square end, and twisted the wire through the hole. This made it so I could easily pull the bolt through the hole and hold the bolt in place while sliding the nut and washer down the wire to the bolt and screwing it on it. Pretty much impossible to lose. The square end also made it easier to hold the bolt while tightening down the nut.
Robert
1/3/2021
Good
by: Marlin 12/28/2022
Tie-downs work fine, as expected. Now I need to get better attachments!
by: Joel 06/27/2023
You guys are very nice but I haven’t followed up on my back order line you said you would
by: Kevin11/17/2021
2019 Toyota Tundra
Missing most of the hardware.
Sierra K.
11/19/2021
Customer Service will reach out to you!
by: John06/25/2019
Toyota Tundra
Got them a couple hours ago. already installed. No problems ,they look very strong or over built . good product. I installed them on my 20016 Toyota Tundra double cab, 6 1/2' bed.
by: Howard08/26/2019
2018 Toyota Tundra
Very satisfied with the customer service at etrailer....some research had to be done and the .representative came thru..the camper tie downs were what we needed
by: David 09/10/2022
stronger than I expected. Wow
by: Joe 07/02/2022
Fast shipping, great product.
by: Steve03/24/2022
These are perfect, easy to use and work well. What I like most is I tighten them down and the stay tight.
by: Brian 10/03/2020
Quick shipping on half my order. Just like last time.
by: Keith 07/18/2021
Top quality product.
by: Scott05/11/2021
Knowledgeable staff, well appreciated.
by: Paul 12/21/2021
Great service , quick deliveries
by: Robert 01/09/2023
by: Corey 07/14/2021
by: Gerry 07/02/2021
by: William 10/04/2022
by: Calvin 09/09/2021
by: Eric 02/16/2021
by: Dot07/15/2022
I had the mountings professionally attached to the frame. The hatches can be easily removed when not in use( and I would recommend that to keep them from being stolen). Using chains and turnbuckles, I feel very comfortable with my truck camper staying where it is.. does not rock, very solid.
It’s nice to feel secure about my camper staying firmly attached.
It was worth the investment.
by: Francisco11/19/2023
I like to thank Lori with etrailer and guiding me through the process of getting , Front and rear,
Torklift Camper Tie-downs -Custom Frame Mounts. Well doing research this was the best way to go for tying down and stabilizing a camper. Torklift camper tie-downs are solid well built!
I had ordered Mounts on Monday and received them on Friday . I Had the tie-downs on my , 2019 Chevy Silverado 2500 by Saturday. The whole process was awesome , real easy installation. Great help with videos and instructions on mounting tie-downs on my truck provided by etrailer. I’m going to use them on my pop-up Hallmark Camper. Thank you for all your help etrailer.
25
1507
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- Available Tie Downs for a 2017 Toyota TundraWe do have a few options for you to add camper tie downs to your 2017 Toyota Tundra, but it depends on some of the specifics for your truck. Since you have the running boards that go to the cab and an OEM hitch I have narrowed down your options to the following: Double Cab - 4WD - 6.5' bed - Front Steel Tie Downs # TLT2310, Rear Steel Tie Downs # TLT3306 Crew Max - 4X2 - 5.5' bed - Rear Steel Tie Downs # TLT3306 Crew Max - 4WD - 5.5' bed - Rear Steel Tie Downs # TLT3306 If you have any...
view full answer... - Rear Mounted Camper Tie Down For 2021 Toyota TundraWe do carry rear camper tie downs, however for your 2021 Toyota Tundra, we only have the TorkLift Custom Frame-Mounted Camper Tie Down # TLT2310. You could also use the Brophy Clamp On Camo Tie-Downs # HSAB with the turnbuckles # TDHP.
view full answer... - Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2021 Toyota TundraNo, the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3304 would not be the correct fit for your 2021 Toyota Tundra. The correct rear tie-downs for your 2021 Toyota Tundra are the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3306. We also have the front tie-downs # TLT2310 and turnbuckles # TLS9529-2-LK available.
view full answer... - Recommended Frame Mounted Camper Tie-Downs for a 2019 Toyota Tundra Double Cab Short BedYes, I checked with TorkLift and can confirm the correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs for your 2019 Toyota Tundra Double Cab with 6-1/2' bed, Factory Hitch, and Running Boards (Stop at Cab) is part # TLT3306 for the rear and part # TLT2310 for the front. If you don't already have turnbuckles then I recommend the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK which are stainless steel so they won't rust.
view full answer... - Camper Tie-Downs for 2021 Toyota Tundra 4x4 Double Cab 6-1/2 Foot Bed & Factory HitchFinding the right tie-downs can be a chore, so it's smart to double check, and we do have the exact camper tie-downs you need for your 2021 Toyota Tundra 4x4 Double Cab with a 6-1/2 foot bed and the factory trailer hitch. I verified with TorkLift for you that the correct tie-downs are the following: - Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT2310 - Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3306 These will be a perfect fit on your Tundra, and the only...
view full answer... - TorkLift Frame Mounted Tie Downs for a 2007 Chevrolet Silverado Classic with 8' BedThere are quite a few option on the fit guide when it comes to camper tie downs, more than likely it is working correctly. The fit guide narrows down the correct part using your year, make, model, bed length, step or no step under bed and hitch type, so it leads to a number of possibilities. Assuming that your 2007 Chevrolet Silverado Classic with 8' bed does not have a board or step under the truck bed and that your hitch is one of the following (factory installed hitch, non-Torklift...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Dustin K
Written by:
Amanda M
Updated by:
Hannah L
Updated by:
Isabelle B
Updated by:
Amanda K
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
J T.
4/12/2021
wonderful, as expected