# 1
Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
it is pretty and it is work well. thank
Look and quality of the mount is awesome. Beefy in size as well. If using on my particular application, removal of rear diffuser is necessary. If they had extended it another inch it woulda been perfect. 2015 Audi a3 tdi. Wouldn’t let me add a third pic but it’s a finger tip space between the ball and bumper with diffuser removed.
# 2
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Fits in receiver nice. Looks perfect for light loads that we will be pulling.
Not much to review here other than it is made very well.
# 3
Curt Class II Drawbar - 3-1/8" Rise - 9-1/2" Long - 3,500 lbs
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
got it in yesterday, very very fast shipping and delivery. I am well pleased with the product, cannot complain about it craftsmanship at all, very well built. I added a rattle reducer along with this, I do recommend anyone putting a rattle/noise reducer on along with not only this but with any hitch insert. plain and simple they all will rattle and make noise.. but overall I recommend this to anyone... you will not be disappointed. Mine is on my 2016 KIA Soul, 2.0 L I have one of the Scoota Trailers designed to haul my mobility scooter...
# 4
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 4-5/8" Rise - 3,500 lbs
it is pretty and it is work well. thank
Perfect for my Honda Fit as it has a low carriage, the Euro shape gave me a few extra inches to tow a small trailer across the country from Oregon to North Carolina with no issues.
# 5
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
I over measured my new trailer so there is a tilt to the trailer, I needed a 3" lift and ordered a 5" lift thinking i need the maximum by guessing , the trailer was level. Use a level if you want a level trailer. I,m a pinhead. Great product, they didn't know that I was a pinhead when I ordered so they sent me very quickly what i asked for. MEASURE MEASURE MEASURE
Excellent service and great products. Very responsive company.
# 6
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
Product was packaged well and item was as described. Very well made and very happy with purchase! Thank you etrailer!!
Heavy duty. Fits good. Does the job.
# 7
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
I ordered a hitch and wiring kit for my 2010 Kia soul.ordering was easy and it was delivered when they said it would .got in my shop that evening and installed both on my car .it was easy and really didn't take that long and saved me a bunch of money .if I would have bought it locally it would have cost me several hundred dollars more.good prices
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
# 8
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
Fits in receiver nice. Looks perfect for light loads that we will be pulling.
Not much to review here other than it is made very well.
# 9
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 3-1/8" Rise - 3,500 lbs
it is pretty and it is work well. thank
Service from eTrailer was great, they even wrote to ensure I got the order correct when I ordered a different size hitch cover than the drawbar that I ordered. Picture attached of the somewhat unique application for the Euro style setup I’m using – I’m dragging my race tires to racing events with my 750HP Cobra!
# 10
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs
Fits in receiver nice. Looks perfect for light loads that we will be pulling.
Not much to review here other than it is made very well.
# 11
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
A little loose, noise but does the job.
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
# 12
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
got it in yesterday, very very fast shipping and delivery. I am well pleased with the product, cannot complain about it craftsmanship at all, very well built. I added a rattle reducer along with this, I do recommend anyone putting a rattle/noise reducer on along with not only this but with any hitch insert. plain and simple they all will rattle and make noise.. but overall I recommend this to anyone... you will not be disappointed. Mine is on my 2016 KIA Soul, 2.0 L I have one of the Scoota Trailers designed to haul my mobility scooter...
# 13
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
Fits in receiver nice. Looks perfect for light loads that we will be pulling.
Not much to review here other than it is made very well.
# 14
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
it is pretty and it is work well. thank
My order got messed up several times. From USPS lost in shipping, wrong part ordered, wrong amount ordered (my fault), wrong part number (printed on label from manufacturer) etc... In the end etrailer managed to make it right!
# 15
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 5-1/8" Rise - 3,500 lbs
it is pretty and it is work well. thank
Great Product! After installing a Curt (C11184) Hitch on my '08 BMW 135i convertible, I needed a drawbar and ball. I really liked the elegant design and one piece simplicity that this one has. It is very sturdy and the dimension measurements were accurate. The whole reason I got it was to trailer my new (old) wood boat home from the barn I found it in. Once the hitch was on and the (56146KIT) Wiring kit was installed. This drawbar slid right in. Thanks to the accurate measurements the trailer sat at the perfect height the first time.
# 16
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
The item I ordered came in fast and was exactly as described. I will use them again.
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
# 17
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
,Draw bar was 100% BUT was packed very poorly! Put a hole in the box and almost got away.
What our customers are saying:
"The phone operator was very helpful and made my purchase easy. I will keep this website handy."