Most Popular Work And Recreation for 2019 Honda Ridgeline

Fantastic experience from ordering to receiving my new Thule Trac Rac system. My package was delivered quickly and without any damage. The installation instructions were clear and simple to follow. I’m very happy with my new rack system

Outstanding product. Fit was perfect. Easy to install and great customer service and support.

Very heavy duty ladder rack that does not "whistle" while you drive down the road. Easy install overall, and it is very easy to install and remove the racks as needed after the original install. At the time of purchase this was not available for my vehicle with a short 5.5' bed, but with very minor fabrication the rails for longer beds fit perfectly. I have recommended this rack to several people since purchased a year ago.

Great product! Packaging could be better for the larger pieces (rub marks). My 2018 Ram 1500 quad cab came with some small challenges that I had to solve myself. No videos or written words available. Basically if your bed rails are covered with a bed liner you need to remove the plastic sleeve in the rear stake pockets. Otherwise you won’t get an equal spacing from one rail to the other. You will also need to use the provided rubber tape with the wedges in order to make the rails level. Otherwise it went together great.

Best rack on the market, and I’ve owned many! This is my second set of TracRac ladder rack systems. The first in 2006, and it was still going strong until I sold the truck with the rack on it, and now this one I purchased in 2022. Unfortunately, this will be my last one as it will take me into retirement, but it will live on with the new owner that buys this truck! Thank you for manufacturing such a good quality product. A+++++

Very clean appearance. Almost too much assembly work. I really like the wind noise reduction shape in the crossbars. I shortened the crossbars because the stuck out to far, a useless area. Surprised that no tiedowns or ratchet strap hook devices came with it. Therefore I drilled and tapped holes on the base plates for cleats. I also drilled the uprights adding pop rivet nuts where more cleats were added. I ran into a problem with the front base plates having to cut an opening in the final for a second clamp to be installed. I love its appearance. A good buy.

This is essentially the same rack TracRac has been making for years – great materials and very well engineered. It is not spec'ed for a Gen2 Toyota Tacoma, because the composite bed doesn't have stake pockets – but after I popped off the plastic bed side caps, there were lots of options for attachment. You just have to be comfortable drilling holes in the rack and in the sheet metal of your truck. In the end, it looks and functions great.

Not A bad system. I like that you can adjust the ladder racks spacing on the TracRac rail. The hold down pieces on the side of the racks are very durable. Its a very nice looking system, adds flair to my truck. I haven't pushed in on the 1250 lb carrying limit yet but it handles 500-600lbs without any issues.

Works seamlessly with the retrax rollup cover and not too hard to install. Adjusting the height takes a little bit of work but that is only done on a very limited basis. Allows me to carry my kayaks, a cargo box if I need extra space or paddles & fishing rods so they don't get damaged by closing the tailgate on them.

The rack is great. I have added kayak and paddle holders to it. Rotopax cans and just recently added Roam case mounts to it. All bolted up with no problems and the racks adjustability made it even easier. No complaints 1 year in. Finish has no defects. Had held up to light off road use.

Delivery - quick An incredibly strong rack. The adjustable height feature, very useful. It lets me put the kayak just inches above the roof. Look at them all, then buy a Yakima !

The rack is great. Simple to install, extremely sturdy & very well designed. I drove it to Cars & Coffee yesterday & someone asked me what I needed to haul or if I merely installed them "because they look cool." The young lady, Janeth, that helped me was really great! Smart, polite, patient, & above all... knowledgeable about product. I would suggest selling the rack specific for Retrax bed cover. The amount of hardware left over when you add the adapter kit to the standard rack seems really excessive. Rather than be $169 add, it should be a deduct of at least that much.

I did install the Thule TracRac SR. I did it on my own and it went well. I'm really pleased with it. As for the photo, I will send you one, once I've washed my truck. Can't make a photo with a dirty truck. I will leave feedback later after some time with the rack.

Excellent rack. I've using these racks for about 15 years.

Great product. I use it to haul kayaks and lumber. It's surprisingly strong and sturdy. I put 300 lbs of lumber on it and never heard so much as a squeak. Installation was straightforward. I'll definitely buy another one for my next truck.

So far, so good. It arrived on time. The only things broken were two of the plastic "insert" pieces that go between the rails, but thankfully I only have a 5 1/2' bed, so I didn't really need them. I had it installed by the mechanics I was taking my truck to for other work and they said it installed pretty easily and one of the mechanics is going to get one for his own personal truck. We practiced setting it up and taking it down before I left. I can definitely do this on my own. I absolutely LOVE this product. I didn't want something that "whistled in the wind" or created drag every day even when I wasn't hauling the kayaks, so this is perfect. Thank you!

etrailer.com is an outstanding company. I purchased a Thule system in January. Due to logistics (my fault) I tried to install the system in April. Three of the attachment arms were incorrect. I contacted Ashley of etrailer, the sales representative who sold me the system, who patiently listened and after receiving the needed photos and explanation, etrailer sent me a replacement system. The new system was installed and the truck is ready to go. Ashley's professionalism, communication skills, product knowledge were excellent. Ashley and etrailers' commitment to solving my issue expeditiously puts etrailer in a class by itself.

Great product, light weight , well built. Customer service is very responsive. have a Ford lighting so wanted a light truck rack. easily removal to save on range/ milage.Made in the USA.

Very sturdy. Great look. Worth the $ in my opinion.

Worked perfect for my 2024 Tundra with a Retrax pro XR tonneau cover. Installation was easy.

Very pleased. Exactly what we expected. Only issue is the driver side back plate that is glued on came off and is gone.

I love that I don’t have to find a place in my garage to store this rack, and remove and replace it with each use. It’s fairly easy to load and tie down my canoe single-handed. The loaded rack is quiet and feels secure at highway speeds and on rough roads. Set up and take-down is quick and easy, and the bed-rail look is unobtrusive. The product has met my expectations in every way. Thanks.

Box was broken on delivery I notified them and they told Me if anything was missing that they would take care of it. Come to find out everything was still there. Everything went together perfectly. Thank you for the communication. Look forward to working again with you all in the future

Rack has worked great hauling 20 foot lumber, 17 foot kayaks and standup paddle boards. The only issue I have had is the front cantilever bar over the cab is about 1" from the roof. If I hit a bump in the road it hits the top of the cab. I have a 2004 Dodge Ram 2500 Crew Cab short bed. Wish there was a little more clearance between the cross bar and cab.

Installation was straightforward. Love the design. Trac brackets easy to use and highly functional.

I chose the racks because they appeared more secure than my previous setup, and they certainly are. I took my time methodically assembling things and all went well. A precious review mentioned there is little to no clearance between the button head cap screw (securing the clamp and bracket to truck rail) and the side of the truck bed; I found by rocking the tall leg I could finger tighten 'till the foot made contact, then just needed a few turns from a L shaped Allen wrench.

Quality product arrived in good condition the day specified with all parts for easy installation.

Very happy with the rack on my 2018 Silverado. I also have the Back flip hard top bed cover. I am able to open all but the very last position. I might still be able to adjust the rails and to get there but it hasn't been an issue. Used it to haul lumber and I made a bicycle rack that works with the racks and the bed cover down. Works great. Was not hard to install.

Very expensive but very high quality. Getting ready to take my Ranger with the kayaks to Florida behind my Motorhome. Tested on an expressway run before the big trip. Very stable and secure

Yakima product is very solid, as always. The T track adaptors do fit on the t-tracks on my tonneau cover on my '24 GMC Canyon. However, the Yakima t track rubber gasket adaptors do not quite fit the roll-n-lock M series XT tonneau cover I have without modification. I did have to cut down the outside of the rubber gasket as they are too tall, which forced the towers to angle in toward the middle of the truck. Once cut down it fit appropriately. Next, I had to cut the rubber gasket on the bottom of the middle of the tower, which overhangs the cover, as the cover has a lip that did not clear the rubber gasket when opening and closing. However the lip does clear the yakima towers when the rubber is removed so the cover does function normally once the rubber feet are modified. I'm sure yakima would not condone this, but it should not have functional consequences and so still fit my needs.

This is my second system. I've bought from you guys. It works flawlessly, as long as I keep the tracks waxed, I couldn't give you a high enough rating for our accident.These racks are

Absolutely love it. Such an easy install, goes on and off in minutes, adaptable and adjustable, great weight capabilities and holds up the the elements well. It also takes seconds to slide the rear section up with the barrel adjusters to fit a motorcycle in the back. I've used it for ladders, construction materials, kayaks, and a place to hang my hammocks when my kids need a nap, ha. The retractable ratcheting straps (sold separately) are incredibly convenient. The only way this product could be made even better is if the vertical arms were height adjustable.

Very happy this product so far. The adapter kit worked great to mount them on my retrax bed cover. I have been hauling up to 2 kayaks and a rod rack on them and they work great. Very solid and they are the best looking racks I have seen on the road.

With this rack, you get what you pay for. It’s expensive and it’s worth it. Well built, quality paint, and once it on your truck, it’s as solid as a brick [house]. Best looking rack out there in my opinion.

DO NOT TRUST THE ADVICE GIVEN BY THE SO-CALLED EXPERTS AT ETRAILER. This rack WILL NOT fit the Carbon Pro Bed...I was told by 2 different "experts" that this rack would fit my 2023 Sierra w/the Carbon Pro Bed, since this rack mounted to the stakebed pockets and not to the underside of the bedrail. After receiving my order, I prepared to install the rails and cutout the front stakebed pocket covers which is required to do the install (also indicated by Kevin C. from ETrailer). As soon as I got to step 3 of the rail install instructions, I knew there was a problem. The instructions indicated there was a hole on the inside of the bed to secure the rear stakebed pocket adapter to. There is no hole or any other type of access to any of the stakebed pockets on the Carbon Pro Bed. So, now I have altered bedrails and have a rack that does not fit. It is completely irresponsible of the "experts" at Etrailer to provide information or direction that is not true or hasn't been confirmed.

I bought this TracRac SR for a 2019 new gen GMC 1500 AT4 with a Lomax/WeatherTech tri-fold hard bed cover thinking I would still be able to open and close cover. I could not. The base rails overlapped the inside bed rail just enough to prevent opening the cover. The base rail itself measure 4" wide. When trying to size it up on truck I did notice that when mounted it looks like the rear base rail is larger than the truck bed rails and hangover the outside of the rails. Some people may or may not liked the fact that it does not follow the contour of the truck bed. I only opened the base rail box so can not comment on cross bars. The base rails were well made and very heavy duty. etrailor customer service is one of the best I have ever dealt with! They do a amazing job, the entire process of ordering to return was incredibly easy and they have a great knowledge of the products they sell.