# 1
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
Couldn't be simpler to order and install for a 60+ female owner of a 13' Boston Whaler with a Long trailer.
These did not fit my 3500 lb axle. It has been very difficult determining the correct size U-Bolts for my axle. It appears etrailer does not carry the size I need.
# 2
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
Just what i needed since my original equalizers were completely worn out .
The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP
# 3
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
The wet bolts were just fine. But the "locking nuts" with the crimped edges were aweful. The 3 dimples each nut has were not useful. Many of the nuts I could use my fingers to spin them on the bolts. Never had locking pressure. I ended up going to local hardware store for much better locking nuts.
I used these "wet" bolts on my leaf spring change out. I ended up using 3 per equalizer since that seems to be the location of most of the movement during axle travel and a friends 5th wheel had 3 installed on the factory set up, so that is what I went with. I painted a yellow mark on the head of the bolt in reference to the grease hole in the shaft, so that I could install them in the direction of "least resistance" when greasing them later, after reading how some guys have to relieve pressure on their trailer in order to get the bolts to take grease. I used Mystik 6 grease mixed with anti seize when putting everything together, then gave them 2 shots of Mystik 6 after installation. (I chose Mystik 6 because we always had good results with that grease when I was in the aircraft industry and it doesn't was out.) I did notice that the grease zerks did allow grease to return out of the fitting which means the spring behind the ball isn't doing its job. That is why I rated them as "good". There are different ways to install these due to the knurled shoulder. If you have access to an impact gun you can just tighten them in with that. Pulls the knurl right in to the shackle. Overall I like the idea of having a suspension that can be greased.
# 4
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
Ordered a lot of parts for a dump trailer rebuild in Sept. Didn't install some of the final parts until Christmas break. THEY SENT COARSE THREAD NUTS INSTEAD OF FINE. I ruined 2 u-bolts and need all 16 fine thread nuts. I'm outside 60 days so I was told I'm on my own. I've spent $5k+ on etrailer. I'll find some place else.......
U-Bolts and hardware seem to be good quality. Package was delivered when promised. Very satisfied with purchase. Will be buying from E-Trailer again.
# 5
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
This component was a perfect match for the axle and springs that I ordered. 2000# rated
after one year axle is very very rusty as well as the hangers and hubs, not sure why but not happy with the price vs quality of product
# 6
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
The bolts look good as well as the leaf spring. I realized I needed to order some h brackets to hold everything together so I'll have to order more. Good service thank you
These are the exact bolts used by the manufacturer of my trailer. I had a spring break after 10yrs use, so am replacing the springs and all the bolts at the same time, thank you to etrailer for the springs (ordered earlier) and now the bolts/nuts, all arrived quickly and accurately, you are my first choice for all trailer parts for my 7 trailers, thank you and keep up the good work!
# 7
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
I won't shop anywhere else! Excellent customer service. Huge selection. Prompt delivery. Everything I needed for my custom flatbed trailer (single axle,7000#).
Bought this to replace the shackle links and hardware for an existing aluminum trailer, did not use the brackets. Bolt shafts are "flared" on the inside head end so you need a press to push them into the bracket. Otherwise, you need to crank down the nuts as you install them to seat the bolts properly.
# 8
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
The parts are of an excellent quality, Web site service was great, I could find everything I needed and all of the support to complete the replacement job. Delivery was exceptionally fast for my orders.
This is a great kit! It included everything we needed to replace the old, worn-out brackets on our 6'x10' trailer. The directions were helpful and the brackets and hardware are nice and solid. We've had zero issues with the leaf springs (purchased on etrailer.com, also) or the brackets. Would definitely recommend!
# 9
Torflex Lift Kit - Tandem Axle - 3-1/8" Lift
Customer service is impeccable and helpful. The length of the lift fit our mount but the wholes for two bolts didn’t line up. Our trailer has a Lippert Axle and we had to drill two holes to fit the bolts properly. I contacted Lippert and they no longer sell the lift kits. Aside from going to a shop and paying over $1k for someone to fabricate a solution for us; this is the route we chose.
Prior to installing this kit, I was unable to remove my tires without first deflating them. The same went for reinstallation. The kit works perfect and was easy to install. I'd recommend it for anyone needing to raise their trailer.
# 10
Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
Got the kit today. Some of the nuts were oval and would not fit on the bolt of course. Now I have to go to box store and find nuts that fit! Not very good quality control!!
The parts shipped to me a day earlier than I expected. I was able to install one side that same evening. Finished the other side the next day. Plan on going camping next weekend. The parts seemed to be of good quality. The installation was straightforward.
# 11
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES
Bushings quiet the trailer for a short period of time. Bushings wear out and squeaks return quicker than I expected.
# 12
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
# 13
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
It looks like it will fit my 1954 Jeep CJ3-B Dana 44 axle tube, although it is 1/8" wider than ideal. Thanks
Worked great for my camper axle
# 14
Swan-Shaped Equalizer for 2" Wide Slipper Springs - 10-1/8" Long - 7/8" Center Hole
I think that the one pictured is nice and shinny black And the one I received is rusty
Your knowledge of the parts was excellent my trailer is an older model and I was concerned on receiving the correct parts. Thankfully they are a prefect fit and the delivery was right on time. Thanks John
# 15
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
My small dumping trailer was bouncing and swaying all over the place. After installing this shock kit, it follows along like a dream. A more than worthwhile investment. Easy to install, great customer service. Thanks!!!
Not a trailer, but... We needed a set of shocks for a three-wheeled motorcycle truck conversion for our resort/farm in upper Thailand. I had to pack it in my luggage for the trip over. The vehicle came with no shocks on the back axle and the ride was really bad. This kit, with a bit of modification, really did the job and the ride is now significantly better in terms of smoothness and handling. Shocks were a bit long, but it worked out OK.
# 16
I replaced the equalizers, shackles, bushings, bolts, and nuts on an old trailer. Everything fit properly without modification. Product quality was excellent.
Perfect fit.
# 17
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center
I spoke with Trevor, Thursday the 11th, I have 1set, 2 PCs, of shackle straps that are shorter than the other 6 shackle straps. I have been waiting for An email from Trevor, have not received it. Could I get the correct straps sent 2 PCs needed. Thanx
This hanger kit and leaf springs for my tandem boat trailer was PERFECT! I did one side at a time. Once we got the old crap off the trailer, reassembly was a snap. It took about three hours from start to finish. Most of the time was spend removing the frozen center bolt from the old equalizers. I'm very happy I opted for the two center bolts to be "wet bolts". Thanks again, I would definitely recommend etrailer to my friends. Regards, Bob
# 18
Equalizer for 2" Wide Slipper Springs - 11" Long - 7/8" Center Hole
Trash !!!! 4 equalizers and just one it’s holding the weld now I’m losing money because my trailer suspension its not functioning
These fit perfectly on my triple axle Kaufman trailer where I replaced all 4 of them. I got some commercial quality spray paint and painted them black. I'll also include some pictures of my old ones that were original with the trailer. You can see they definitely needed to be replaced! I always use etrailer for my trailer parts. Everything is good quality, fits perfectly, and arrives on time.
# 19
Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
We have had great experience with eTrailer, These parts came in as described.
Fits perfectly!!!
# 20
Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
Worked great, paint is holding up, hardware was good quality, bolted right in…no issues, hold load at least as good as factory springs. Would recommend and buy again!!
Not only were the parts the right parts the kit had all I needed to do it right the videos made it as easy as it could be. The right parts that work and good videos on how to do it. I did call to be sure I was ordering everything I was going to need and was given great advise and was not encouraged to get things that I did not need. They are my go to team to get anything trailer done.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."