# 1
Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1
Great product. works just fine. The problem I had was matching the mounting plate under my trailer. Apparently not a standard so I had to take it to a trailer manufacturer to make it fit.
They went on a custom made trailer build that’s not yet in service. Seem to function as advertised.
# 2
Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2
Quick shipping. I will be ordering more parts as I need them for our RV.
We replaced four badly worn 2500 lb jacks with these heavier 5000 lb jacks and are very happy with the quality of these new jacks. They arrived quickly and were a perfect fit. The construction is superior to the jacks we replaced. Your instructional videos were very helpful. Thanks for your excellent service.
# 3
Ultra-Fab Ultra Scissor Jacks - 24" Lift - 13,000 lbs - Qty 2
if I had to rate this upgrade in difficulty one being the easiest five being the hardest, it would be a one. Super simple. Take the nuts and bolts off your old hardware and install the upgrade in its place. I read some of the reviews were people were annoyed with the counter clockwise rotation and the bolt sticking out too far. I really didn’t see a problem with either. I know you’re not supposed to use a drill to extend and retract these but I always have. I suppose as long as you’re not torquing the heck out of the adjustment screw you shouldn’t have any problems. I always put a small flat 2 x 6 piece of wood under the foot of each one of these. It seems to add quite a bit of stability.
The jacks themselves have worked great, they keep the trailer level and solid during our concession events. I just had them mounted to the trailer so I don't have to put them in and out at each event. The jack handles leave a bit to be desired so I use a 20v drill w/ a 3/4" socket to run them up and down.
# 4
Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4
Perfect! My weld for rear bumper was in the way of the bracket, so I just swapped 1 bracket each side from the old jacks, jacks were same size but rated lighter weight. Thanks for quick delivery! Always like the tutorials and pictures.
The box was a bit beat up when it arrived, but hopefully everything is intact.
# 5
Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 5,000 lbs - Qty 2
Absolutely a breeze to replace the old jacks. They hold the trailer up with ease.
These stabilizers are much better built that the ones that came on the trailer. The lift components are sturdy and the screw shaft is bigger diameter.
# 6
Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2
I mounted this Stabilizers Jacks to the back of a 4x8 utility trailer. I use the trailer to haul my Honda ATV to MotoAmerica motorcycle races. Once the ATV is removed I lower the jacks and mount my tent inside the trailer. These stabilizers allow me to safely move around in the tent without fear of the trailer tipping.
Does not ratchet up, a pin must be manually inserted. It only came with one 6" long pin, which needs to be cut in half to make these stands functional. This is more like a folding jack stand, but the pin is not connected to the stand with a lanyard. I will be cutting the bar in half and welding a washer to hold it in place. I will also need to add a lanyard to it so I don't loose it. I would not recommend this product, but I have not found a better substitute for my application.
# 7
Lippert Scissor Stabilizer Jack - 24" Lift - 5,000 lbs - Qty 1
These things make a great trailer jack. A plate on top and your done. Tried bottle jacks, these are great.
Great replacement
# 8
Ark Drop Down Corner RV Stabilizer Jacks - 30" Long Corner Steadies - Black - Qty 2
These were a great addition to my custom army overland trailer, m1101 they are super easy to use and work perfect to level out when it's time to camp
Works perfectly to level my off road trailer/camper. Gives my camper a solid footing on any terrain. Easy to mount and operate. They fold up tightly against the frame and don't affect ground clearance whatsoever. Would buy again.
# 9
Bulldog Tandem Landing Gear Set - Drop Leg - 36" Lift - 8,000 lbs
Etrailer was great and shipping was fast. However the shipping was abusive to the packaging resulting in bent shaft on leading jack, which made it impossible to install gearbox for proper operation. Being mechanically inclined I could disassemble and straighten shaft hoping no stress fractures ending its life sooner than expected, or use shaft from previous jack. But why? I bought new parts for a reason.
Delivery was on time, but the box it arrived in didn’t fair we’ll and parts were hanging out of the box! But everything was accounted for and the parts were well wrapped. Installation was very easy. The only issue was the locking pins mount plate is tack welded to the primary leg that the motor moves up and down. Those mounting plates had to be removed to install the lead and follow jacks. A grinder made short work of that. I didn’t put the mounting plates back on, instead I used my spring loaded pins that were on the old legs, they were still in good working condition. Also I didn’t use the adjustable cross over rod that came in the package . I opted to use the one that was on my old jacks, it was constructed of heaven gauge tubing and didn’t have a much (slop) movement in it. Also did not use the plastic housing gear box, I purchased a aluminum house gear box from e-trailer a few months back and used that one keeping the plastic for a spare. Very satisfied.
# 10
Ultra-Fab Ultra Scissor Jack - 24" Lift - 6,500 lbs
Replacement for bent camper stabilizer jacks, these work great.
Very solid and well built, exceeded my expectations. Mounted tonight and the camper is now solid as a rock when parked. It only had rear stabilizers previously and at 19 feet needed the stability in the front. Wifey says previously it felt like she was on a water bed when I was walking in the back. Not any more!
# 11
Ark Drop Down Corner RV Stabilizer Jacks - 24" Long Corner Steadies - Black - Qty 2
These are incredible! I have a teardrop camper that came with "scissor" type stabilizers, and they almost immediately broke. They were very difficult to raise and lower and I needed an impact drill to make them work, only weeks after delivery. Unfortunately the company went out of business and I was forced to find my own solution. eTrailer.com to the rescue! I bought 2 sets so I could have one on each corner of my Teardrop Camper. I got them welded locally for just over $300, and couldn't be happier. These drop down straight with just a bit of ground clearance. Although the primary purpose is stabilization, I could use these to jack up the whole side of my camper to change a tire now. No more going underneath and jacking it up manually anymore. I love how they can be set at an angle or straight up and down. My only question is why didn't the builder of my camper put these on in the first place! If I am going to have stabilizers that are used every time I go out, why not have the best? Love these, highly recommend.
Product works great. Any 3/4 inch socket can raise and lower the jack. Fully adjustable from vertical to ground to perpendicular and many stops in between. They can rotate to work on left or right side. I drilled and bolted them on. No problem.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."