# 1
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Very fast shipping. Very pleased with this heavy duty drop hitch. I traded vehicles to a GMC Yukon and had difficulty finding a 10 inch drop to pull my 16 foot retro travel trailer. I was so pleased that I immediately ordered a couple more things from etrailer.com. Thanks!
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
# 2
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer
ball mount fits loosely in the receiver so that the pins that extend out from the ball mount shaft through the holes in the receiver don't extend out far enough, for my liking. This is because since the ball mount shaft has so much play, it will shift to one side. Then, the pin on the other side does not extend all the way out of the hole so that it is not flush. True, i am being paranoid. However, i imagine a case like a crash where enough force could pull the shaft out from the not fully extended pin side to release the trailer to wreak more damage. I would just feel more secure if the pins went out further through the receiver or the shaft was not so loose. Otherwise, i really like the product a lot... enough to give it four stars... :o)
# 3
Convert-A-Ball Ball Mount for 2" Hitches - 6-3/4" Rise, 8" Drop - 10,000 lbs
Very fast shipping. Very pleased with this heavy duty drop hitch. I traded vehicles to a GMC Yukon and had difficulty finding a 10 inch drop to pull my 16 foot retro travel trailer. I was so pleased that I immediately ordered a couple more things from etrailer.com. Thanks!
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
# 4
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Works great used for 3 different trailer we have handy it's heavy well made.
# 5
Draw-Tite Ball Mount for 2" Hitch - 7" Rise, 8" Drop - 9-1/2" Long - 12,000 lbs
Heavy Duty Drop Down Hitch no problem pulling a 10,000# trailer
It fits perfect on my f350 diesel, super heavy duty. I'll be using it for towing my car tilt bed trailer.
# 6
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
I pay to receive the product in good condition, my hitch ended up being damaged, I don't know what type of packaging this was, they are supposedly a waoooo site, I ask for my return label and my refund, I
Works flawlessly. I was very excited the day I got home and my Rapid hitch was on the front porch. It came in nice box and was packaged very well. I opened it up and unpacked my rapid hitch and I was very impressed with the quality and precision of this hitch. All of the machining was PERFECT and everything fit together right. I put it in my truck right away. Going down the road with the trailer on and off there is absolutely no rattles, clunks, or jolts. I also love how everything is aluminum or stainless steel, NO RUST. I wish I could've gotten the greaseless model but my boat is too heavy. My only complaint is that it doesn't come with locking pins. With a hitch this expensive I really wish it came with them. Do yourself a favor and order them with your rapid hitch so you don't have to pay for shipping in the future. Other than that great product and I believe it will outlast me.
# 7
Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop - 10,000 lbs
Very fast shipping. Very pleased with this heavy duty drop hitch. I traded vehicles to a GMC Yukon and had difficulty finding a 10 inch drop to pull my 16 foot retro travel trailer. I was so pleased that I immediately ordered a couple more things from etrailer.com. Thanks!
I sought this concept out to cure how rough my trailers were pulling behind my Yukon. This made a huge difference when I upgraded to it from a standard, non-shock absorbing receiver. I use this with a 21' boat & a 18' flatbed - would recommend it highly.
# 8
Curt Ball Mount for 2" Hitches - 7" Rise, 8-1/4" Drop - 9-3/8" Long - 10,000 lbs
After a year the mount shows no wear at all I would recommend this product to any one needing a good hitch mount, with a large rise and drop.
Was needing a 7-8 inch ride for my camper that could sustain a GVW of at least 5000 lbs. Let me say, it’s a hard to find item. Thankfully I called Etraer and with some research, found me the perfect ball mount. It’s heavy duty for a reasonable price.
# 9
Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 10" Drop, 11" Rise
This is a great product, well built and matches my chrome bumper. My truck is lowered so I needed a sturdy product with a good rise to compensate. This hitch, along with the Roadmaster Quiet Hitch from etrailer and the Fastway Trailer Hitch locks work together nicely.
Looks good and functions even better. I have the hitch fully adjusted and never had an issue. Gotten a ton of compliments! Would highly recommend!
# 10
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
Very fast shipping. Very pleased with this heavy duty drop hitch. I traded vehicles to a GMC Yukon and had difficulty finding a 10 inch drop to pull my 16 foot retro travel trailer. I was so pleased that I immediately ordered a couple more things from etrailer.com. Thanks!
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
# 11
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Very fast shipping. Very pleased with this heavy duty drop hitch. I traded vehicles to a GMC Yukon and had difficulty finding a 10 inch drop to pull my 16 foot retro travel trailer. I was so pleased that I immediately ordered a couple more things from etrailer.com. Thanks!
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
# 12
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
High quality build, high towing capacity, very flexible - will adjust to a wide variety of hitch heights. Reasonable price and fast delivery!
perfect product - super heavy duty, very fast delivery
# 13
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 10" Drop
Very pleased with product, looks awesome on my lifted 01 Ford Superduty F-350. This 10 inch drop allowed me to keep my trailer level when hauling my 4 wheeler. Just in time for opening day.
Product looks and feels great. Only reason it got a 4/5 is because a truck driver friend of mine told me that he had one and the shank wore down from rubbing on steel bc of the aluminum on steel receiver contact. I might rig up a thin steel collar for it to prevent any degradation down the road. Works great on my truck with 7 inches of lift and 35" tires. Buy the Andersen Stainless steel locking pins for it so it doesn't walk off. New pins have better corrosion resistance and are less easily picked by thieves than standard barrel locks, plus they match the look.
# 14
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10K
Well built hitch just the right amount of drop for my 2014 Yukon.
Did not fit my application been sitting on a shelf
# 15
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 9" Drop, 9-1/2" Rise - 10K - Black
I USED IT ON MY WIFE YUKON ONLY IN THE SUMMER MONTH AND IT REALLY NICE AND I DON'T WANT ANY RUST ON IT I ALSO HAVE A BLACK ONE ON MY WORK TRUCK IT A NICE HITCH LONG AS YOU KEEP THE PINS GREASE
Excellent product, this is my second one to buy. I’ve had a B&w hitch on my 2011 gmc z71 for 6 years and bought one for my wife’s 2017 GMC Yukon. I’ve never had a problem with these hitches at all.
# 16
Flash Strong Solid Steel 2-Ball Mount - 2" Hitch - 10" Drop, 11" Rise - 12K
The long extension is fantastic. Works great with my 2002 Yukon. I needed a 6 inch riser to get my trailer level for better towing. I regularly swap it to different heights as I own several vehicles with various ride heights. Super happy with it.
I bought this drop down to tow my enclosed trailer behind my Humvee. Because of the nearly two foot ground clearance I wanted a sturdy hitch but still tow a level trailer. This fit the bill 100%. I was not disappointed in this unit. First of all it’s heavy. And that’s a good thing in my mind. Secondly it fit like a glove. Great powder coating and really sweet hardware. Every inch of this hitch is top quality. You can’t go wrong with the price or with etrailer. Best customer service and quick shipping. I highly recommend you chose this hitch if you need a substantial drop and DON’T buy from anywhere but etrailer.
What our customers are saying:
"Excellent service and communication. Expect part to be excellent too!"