# 1
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
I have received significant support from e-trailer over the past 10 days as I have made several purchases for a new axle, springs, and hangars for my utility trailer. William and others have went out of their way to assist. I have been very satisfied with all products received. I will post another review when the trailer is completed.
# 2
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
Use these to rebuild the used trailer I have and with the new wheels she tracks and goes like new thanks for all the help, first trip 1000 mi round trip to pick up my new ride road fantastic thanks again
Compared to the original suspension parts that came off my trailer, these Dexter heavier duty suspension equalizer and shackle with treatable bronze bushing kit seems to be a major improvement. The shackles have double the thickness than original.
# 3
Dexter Trailer Springs Over-Under Conversion Kit
This product did exactly what we needed it to. Bought a replacement axle from Dexter but it created clearance issues in the wheel wells. After installing this kit we have much more clearance and the trailer rides like a dream.
Outstanding product. I am so grateful the install video was added to the page. I am a hands on individual and struggle reading directions with numerous steps at times and it made it so much easier to install this. The explanation of how the mount has to sit flush with the axle seat once you tighten down the spacers was very helpful during the alignment stage. I still have to weld the brackets to the axle for extra support as recommended but I did notice that I will be gaining roughly 4” of clearance height to my trailer. This will allow me to sit more evenly with my lifted truck and get my trailer in my driveway easier since I have a water drainage built in to the entrance way with a big dip.
# 4
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
Excellent, had everything I needed and more for my trailer. Everything fit well!
I bought a axle, springs wheels, hubs etc. to build a utility trailer, I inadvertently had ordered incompatible hubs for the selected axle the person filling the order noticed this and contacted customer service to alert them of the issue who then called me to correct the problem. This saved me the time and expense of returning the part and delaying the project. great service, attentive, knowledgeable employees and great products. Thanks E trailer.
# 5
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear
The jack is decent. My only complaint would be that the wheel I purchased to go on to the jack does not pivot or turn when I push the trailer around. I have to constantly kick the wheel in order to guide the trailer into position.
very good products and real good price
# 6
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 3-1/4" Center
i liked the time it took to get, i liked the ease at which it was to order, liked no shipping fees, i did not like that the spring plates were not for 1 3/4 or 2 in springs, the ones received were for 2 in to 2 1/8 in. i used the plates i had that allowed the u bolts ride much closer to springs. maybe thats the way they are made now. but if thats the case i would not buy them again. Also liked the prices but i thought i saw that the spring bushings came with the kit. It is very possible i was mistaken about that. All in all i would order from etrailer again.
I only needed the equalizers,shackles and bolts as mine were worn out. I already had new bushings left over from another project...... it was a great deal and a great fit. No problems, Fast Shipping and YES I will be using etrailer.com again!
# 7
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
Product and service are excellent. You should consider using better shipping containers or using a different shipper. My box showed up with a hole in the bottom and the tape ripped almost gave way. By reading other comments this is not the first time.
Got these parts quickly and was able to rebuild my trailers entire suspension before hauling a car on a 1000 mile weekend road trip. Very glad I found E-trailer.
# 8
Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only
Everything is good bought two axles one with hydraulic brakes springs and hangers used to built fifth wheel horse draw hayride wagon
Great stuff to work with. Pallet racks and etrailer parts
# 9
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.
Rec'd item quickly along with new wheels I purchased. Items were packed very well. I installed my new wheels, tires, and equalizer kit the following weekend and my trailer was ready to go.
# 10
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
Perfect component for my 2000# undercarriage project. Very sturdy and fit as advertised.
My 6' x 10' landscape trailer was a homemade by a prior owner. While it was mostly constructed very well, the spring hangers were not correct. The spacing for the springs was also wrong, and it had very little fender clearance. There was also evidence that the spring U-bolts had contacted the frame on occasion. (I do not carry loads anywhere near the 3500# axle rating.) I added an extra set of holes on the front hangers in case the ride height proved to be too much, but I like the way it sits with the stock holes. I don't think I'll be utilizing the extra holes. This kit was just the ticket to increase the suspension travel and fender clearance on my landscape trailer. Now it "sits right"!
# 11
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
These were a direct replacement for my 25 year old dump trailer. I removed the plastic bushings and used brass.
The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP
# 12
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/8" Long - 9/16" Center Hole
Excellent service and prices. Needed to replace curved equalizer, shackles and bolts, nylon spring bushings, u-bolts, and wheel bearing seals on my sailboat trailer. etrailer had everything and shipped it fast. Staff at etrailer was excellent!
These were just what we needed for repairs on our 1983 stock trailer. The old parts were quite worn. We gave the trailer a face lift as well, and it should last another 37 years.
# 13
Straight Equalizer for 1-3/4" Wide Double-Eye Springs - 8" Long - 3/4" Center Hole
Thanks so much for stocking these older parts. Many of us can't afford to rebuild the entire suspension system because we can't find parts for the older units. Parts came faster than expected and a perfect fit. Thank you.
The parts fit perfect, etrailer has the parts to take care of all your trailer needs.
# 14
Straight Equalizer for 1-3/4" Double-Eye Springs - 5-1/2" Long - 9/16" Center Hole
Great products and are operating very well. Had some issues understanding the electric over hydraulic pump wiring but was referred to the right person to walk me through it.
It was exactly what I needed. Tried to find the equalizer every where but nothing matched. My boat trailer is a 1973 and its hard to find parts for it, but etrailer had it
What our customers are saying:
"Good experience...received the complete order within a couple of days. I will definitely do business again."