Summer Starts Here - Save up to 70%
# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Very easy process. Best price on hitch and accessories. Delivery was right on time. Only thing to check is ball size thread diameter. Hole in receiver is for 1" stud. I'm using a 1 7/8 " ball and still looking for ball with 1" stud. Definitely will order again.
The hitch was the correct one for the car, and the cable harness and receiver was correct also. Delivery was extremely fast: ordered on Wednesday, delivered on Friday. All necessary parts were included, including instructions for torquing down the bolts. I installed the hitch, 'without a hitch' on Saturday. It took about an hour, since I don't have any air tools. All in all, I am very satisfied, and would recommend your company. Thank you.
# 2
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
Two thumbs up!!
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
# 3
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I have had a problem with my carrier for my mobility scooter. It has always been too low. With the D210 receiver it raised the carrier another four inches. The quality of the product is excellent.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 4
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Very easy process. Best price on hitch and accessories. Delivery was right on time. Only thing to check is ball size thread diameter. Hole in receiver is for 1" stud. I'm using a 1 7/8 " ball and still looking for ball with 1" stud. Definitely will order again.
The hitch was the correct one for the car, and the cable harness and receiver was correct also. Delivery was extremely fast: ordered on Wednesday, delivered on Friday. All necessary parts were included, including instructions for torquing down the bolts. I installed the hitch, 'without a hitch' on Saturday. It took about an hour, since I don't have any air tools. All in all, I am very satisfied, and would recommend your company. Thank you.
# 5
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Good price, fast order processing and fair shipping.
Items packed well delivered on time. Doesn't get much better that that.
# 6
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
Incorrectly listed on etrailers as a 3-1/8” rise, when really this is a 5-1/8” rise (marked correctly on the item itself, but listed incorrectly on this website).
I am completely satisfied with the product. Great quality and excellent finish. Prompt shipping and excellent customer service. It is stylish and functional and will meet my needs for towing up to 3,500 pounds. I would definitely do business with this company again!!!
# 7
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
Not long enough to clear my vehicles bumper. etrailer was unhelpful and would not offer a return. This was the product they recommended for my vehicle when placing the order with a receiver and wiring harness
There were some UPS delivery issues, damaged in shipment. But, etrailer.com jumped right on sending out another shipment after it was apparent that UPS would not complete the delivery. The installation took longer, maybe 1-1/2 hours, because I did not have all my tools ready and I was working on the concrete floor in the dark to outside with a portable shop light. Everything fit well and it looks great. The 2" drop ball mount was the perfect height for my 2019 Toyota Highlander Hybrid. I love the look of the Curt black insert that makes the hitch looks like it belongs on the car, nothing embarrassing at all. Anything negative? Maybe. The flat plate was a little difficult to hook onto with the UHaul safety chains on a 5x8 trailer. That's hardly a negative, though, and I wouldn't have spent more on another brand choice because of this. Happy happy!
# 8
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 9
Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
It did not fit . I had to grind it down so it would fit the reciver.
# 10
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
# 11
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
It will have to be returned. Not long enough!!!
Great price. Arrived a day earlier than expected. Well packed. Easily installed. Fit like a glove.
# 12
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs
Product delivery great
I love at the heavy duty construction of this ball mount and ball. I also like the fact that it came with the pin. I am definitely happy with this purchase!
# 13
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This is a huge difference maker for us. I can open the tailgate of our truck with the trailer still attached, and helps minimize any body damage if my backing up is not good.
# 14
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
It did not fit . I had to grind it down so it would fit the reciver.
# 15
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
It did not fit . I had to grind it down so it would fit the reciver.
# 16
Curt Class III Ball Mount with 2-5/16" Ball - 2" Drop - 7,500 lbs
It will have to be returned. Not long enough!!!
Great price. Arrived a day earlier than expected. Well packed. Easily installed. Fit like a glove.
# 17
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Good price, fast order processing and fair shipping.
The hitch works great. The service was excellent!!! I'm going back and having a hitch put on my other car soon. Thank you.
# 18
Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
Look and quality of the mount is awesome. Beefy in size as well. If using on my particular application, removal of rear diffuser is necessary. If they had extended it another inch it woulda been perfect. 2015 Audi a3 tdi. Wouldn’t let me add a third pic but it’s a finger tip space between the ball and bumper with diffuser removed.
It isbthe right size and helps with the height difference to make the trailer more even with the back end of my Accord.
# 19
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
It did not fit . I had to grind it down so it would fit the reciver.
# 20
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 4" Drop - 7,500 lbs
Product delivery great
I love at the heavy duty construction of this ball mount and ball. I also like the fact that it came with the pin. I am definitely happy with this purchase!
What our customers are saying:
"very easy to shop"