To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
If you want your setup to look clean when you’re not towing, this base plate kit keeps it that way. The hidden design leaves no bulky crossbar or brackets in sight, and the removable arms detach in seconds. Snap-in receiver covers protect the sockets from dirt and debris so the arms slide in and out smoothly every time you hook up. The end result is a tidy, factory-style look that doesn’t get in the way when you’re walking around the front of your vehicle.
Connecting your tow bar shouldn’t take all afternoon. With the twist-lock attachment, each arm slides in, twists to secure, and locks into place without fuss. No tools or awkward alignment needed—it’s quick, solid, and easy to manage on your own. When it’s time to disconnect, just twist and release. It’s a simple system that makes hitching up less of a chore, whether you’re in your driveway or at a campsite.
If you already have a tow bar setup you like, this base plate won’t make you start over. It works directly with Blue Ox, Demco Kwik-Tow, Curt Rambler, and etrailer tow bars—no adapter needed. For Roadmaster users, just add the correct adapter (e98983, e98984, e98979, or e98981, sold separately) to match your specific model. This flexibility makes it easy to keep using your existing gear without extra parts or guesswork.
This kit bolts onto existing attachment points with solid construction that spreads towing forces evenly. Every component is built to handle miles of travel without loosening or flexing. The distance between brackets is 15" and bracket height is 23-1/2", giving you solid reference points when setting up your tow bar angle or checking for level alignment. It’s dependable hardware made for long hauls and repeat use.
When it’s time to store your setup between trips, high-density polyethylene covers snap into place over each receiver. They block out moisture and road grime so corrosion doesn’t creep in and seize up the sockets. That way, when you’re ready to roll again, everything connects smoothly with no surprises.
Ratings & Reviews
If you follow the easy to read and understand instructions, it’s a breeze to install. Beautiful!!! Highly recommend rhese baseplates
Like the look of the base plate ( hence invisible).
Amy was very knowledgeable about your products and Absolutely Professional as well Prompt with obtaining Correct information. Very friendly and helpful. Will Surely use your products and services when needed. Thank you
Excellent quality workmanship. Installation instructions were clear and the process was straightforward. Very pleased with the end result.
Very good quality. Great instructions and install video.
easy to find on your web site, quick delivery, everything needed for a quick and secure installation. The instructions were easy to follow and all parts were included and fit perfectly.
Fit my 2018 Colorado 2WD manual perfectly. I disconnect the drive shaft and hose-clamp it to the gas tank cross-member when I flat-tow it. works perfectly
This is a great base plate, it really looks good and integrates well with the front of the jeep.
Very easy to install and I love the finished look. However I had to cut a couple of relief points in the rock guard in order to get the back two screws into place. Without these the rock guard would bind against these points on the base plate and not allow the rock guard to travel back far enough to reattached the screws. I have a 2025 Jeep Wrangler Sahara.
Easy installation on my F-150. Videos on website are very helpful.
Great fit, great instructions.
They were easy to install and came with good instructions and pictures. This is the second vehicle I have installed this product on and etrailer is my go to.
Relatively easy install. Double check the skid plate templates. I had to change mine significantly, not just holes but slots from the top all the way to the bottom of the towbar. In the end, they look great they install well. Very nice system.
Heavy duty bracket. The included bracket for the electrical is also heavy duty.
Mounted on a 2025 Bronco with modular bumper. I did have to do a little additional cutting on the bumper to make it fit.
Easy installation if you watch the videos on the etrailer website.
I like the fact that this base plate is hidden behind the air dam below the bumper.
Install of the baseplate itself was not difficult and went smooth. The templates to cut out the holes in my plastic shroud were not accurate. It took some additional trimming to get right and I found that a bit frustrating.
I have installed three base plates on my vehicles. All have been purchased from trailer. They have all been rather easy to install just a matter of taking the time it takes. On this last one mounted on my 2024 Ford Maverick I recommend adding to the instructions an easier way to unplug the light plug from the front facia. I think it is much easier if one turns the wheel full left and unplug the socket before pulling the facia. Easier than current instructions that say be careful when pulling the facia since the plug needs to be undone. I was able to do the whole thing by myself this way and not needed someone else to hold the facia while disconnecting the plug.
Everything went together well and it looks great. No cutting or modification needed other than drilling the frame for the 2nd bolt. 2023 GMC Sierra 1500 AT4 Duramax
Nice setup. Instructions were little off for my application (2026 with shutters) Shutters had to be removed to install correctly. Instructions did not cover this. Everything fit as it should. Final product very satisfied.
2025 Ford Mavrick AWD Hybrid. I have installed 2 base plate kits on Honda CRVs.
Piece of cake. Remove front cowling..install base plate..done. Not so on my 2 day old Mavrick. 1 add a spacer to move kit away from shutters...adding washers is super poor planning on manufacturing's part..2 you don't have to go up & over in the middle now 70% of the condenser air flow is blocked by welded steel..could have been much better. 3 provide a mounting ring or hook...wrapping a safety cable around sheet metal components is silly Engineering.
Installation on a 2018 Jeep JL Unlimited Sahara went well, no surprises. Attaching the base plate to chassis safety cables required some ingenuity as the instructions were useless in this installation. Etrailer should post some actual installation photos vs. a poor generic diagram.
Easy to install and works like should. I put a aftermarket bumper on as well so it was simple with no issues to install I have pulled it over 6000 miles and a lot of one nighter stays. It is simple to hook up and no issues pulling.
Came very well packaged, looked great very well made and heavy duty.
Instructions could have been better.
Template for air dam cutout just a rough starting point you will need to do more trimming for proper fit. Overall very happy looks great and very solid.
I've bought from e-trailer several times and I'm always happy with my purchase. The base plate and tow bar are of excellent quality and a good price. Installation was as not too bad; I watched the installation video for my truck even though it was for a different base plate. It gave me enough information to get the job done.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.