Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
This item does not fit your vehicle
2019 Ford Fiesta
These items fit your vehicle
2019 Ford Fiesta
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you like a clean, factory look when not towing, this base plate kit delivers. The hidden bracket design keeps the setup tucked out of sight, and the square drawbars remove easily with two hitch pins. Once they’re off, the remaining brackets are virtually invisible and protected within the grille area. It’s a simple way to keep your vehicle looking stock without bulky hardware showing.
Every piece is computer-cut from all-steel material to provide exceptional strength where it counts. The black powder coat finish resists corrosion and wear, so it stands up to weather and road grime over thousands of miles. The sturdy frame attachment spreads towing forces evenly, helping maintain stability and durability through extended use.
If you enjoy doing your own projects, this kit is ready for a weekend install. It bolts directly to the frame with no welding required, and all mounting hardware and instructions come in the box. The precise fit design helps everything line up cleanly so you can get solid results without special tools or fabrication work.
Already running a Roadmaster tow bar? This base plate kit fits right in. It’s compatible with Roadmaster tow bars when used with the quick-disconnect crossbar (910021-00 – sold separately). That means an easy connection process that keeps your setup consistent across vehicles while maintaining a secure, reliable link when towing.
Ratings & Reviews
The installation took me about 7 hours, the facia removal was tedious , between the installation videos and instructions, I performed the task. This bar has one con, the pull rings on the removal bars are flimsy , my first pull stretched one out. I’m sure trailer has a fix for this under warranty, I hope.
Etrailer was very easy to do business with and made it simple to ship my order directly to the RV shop that was going to install it. This was my first order from them, but I will definitely consider future purchases from them if I'm in need of something for my RV.
The representative (Sarah) was very helpful and knowledgeable, the prices are very reasonable and all my items arrived on time. When I called with a question, she was very polite, friendly and genuinely sounded like she enjoyed her job. When I discovered one of the items I ordered wasn’t needed, getting help to return was hassle free. I would recommend etrailer to anyone that needs anything RV or trailer related. I will definitely do business with them again. I am impressed.
We towed our 2004 Subaru Impreza WRX STI 3000 miles last year, this is an ideal setup, discreet when not in use, solid, and easy to get on/off. Very please with the support I received from Roadmaster as one of the bolt was missing, was sent super quickly.
Not an easy install on a Trax but it is very well made and gives a clean look. I did customize by cutting down the 6 pin bracket supports to get it flush with front of the car.
Install pretty easy. You will have to change directions of one bolt due to obstruction ( frame). Cannot torque a few of the bolts. These are the ones with wire attached.
Rock guard needed addition trimming from factory instructions.
Awesome delivery speed, and a well made base plate for my 2007 Element. Installation was a breeze (thanks to my son’s heated shop) and I had to do no cutting to make this fit. I had a Stowmaster tow bar that came with my RV and etrailer was able to steer me to the correct missing parts to make this a really affordable installation. Now to get out of this snow!
Purchased for a 1997 Subaru Impreza. Delivery was amazingly fast! I didn't have it installed until a few months later, as my travel plans had stalled. It didn't quite bolt right on, but was close, and a friend had to modify it some to make it work. I still hear a grating noise when I turn too sharp on one side, but otherwise it's fine.
The front connection plates didn't line up with the holes, so had to have those modified, as well, in order to line up and attach to the tow bar. Once the new holes were drilled, I was able to hook up and go.
It's relatively easy to connect after finding a way to do it alone.
I've towed from CO to TX and all over TX with it with no problems.
Fit and finish is great, the illustration for what you trim on the bumper isn't great but otherwise pretty easy install (I ended up measuring between the mounts on the draw bar and just trimmed accordingly)
I’ve been purchasing products from ETrailer since 2005 and all the products I’ve purchased have been a great value. The products mentioned above installed perfectly and with the direct assistance from ETrailer everything fit as suggested. I will always interact with ETrailer as needs present themselves.
After ordering the wrong crossbar, etrailer sent the correct one for our Mini Cooper quickly. However I did have to modify most of the holes as the cross bar didn’t quite fit (but close). I had to drill the three main bolt holes to 11/16 so that the bar would go over the Mini’s 3 main bumper bolts on both sides. The two lower bolt holes (each side), needed to be drilled out 3 sizes larger to accommodate the 4 bolts that come with the kit. I had to drill out the Minis lower holes to better align with the crossbars lower holes. I would also like to note it being a pain in the knuckles to reach one of the three (each side) bolts to put the stock nuts on the bolt and then try and get them tight. (The main bolt pattern for the upper bumper is diamond shape, one up tow bolts lower. (The lower “inside” bolt on each side is the one that is hard to get to and tighten.) Sorry I didn’t get picks, I was in a rush to get the car back together. There’s an angle piece on the cross bar that blocks the hard to reach bolt, it would be helpful if that could be made more accessible to reach.
Overall the installation was great, however the process of drilling 3 - 1/2" holes in that little bumper that has a Rockwell Hardness of about 60, seems to be a bit over the top.The instructions are spot on, delivery was great, the quality of product was accurate. I am a happy boy!
Replaced same part that was damaged in a crash. I had used my original one for close to ten years without issue. Fast shipping from etrailer.
The Base plate kit is well made and came with all the necessary hardware.Installation is relatively straight forward. I did have to enlarge two of the holes that didn't quite line up. But overall I'd recommend it.
Bolted right up. Installation should be done with bumper on, as you can't fit the ends through the louvers without some convincing. Works great so far. Was able to use a Stowmaster 5000 with it.
Installation was a bit trying. Ended up looking very clean and almost invisible.
Using the tow bar worked super easy and our motorhome hardly noticed the Mini Cooper back there.
Came quickly and is very high quality. Great directions/video from road master makes the installation step by step easy to follow.
Skill level is probably at the intermediate level depending on experience.
The #118-3 is a perfect fit on my 1995 Geo Tracker. When you pull off the removable arms you would never know they are there. The Quality is very good easy to put on all you have to do is drill 4 holes the tube on the base plate fits into the tube on the frame of the tracker and with the 2 bolts it is a solid fit. I was worried about the plate nut getting it inside of the frame but it went in easy when you put it over the frame tube and use a thin piece of metal to slide it in place. I’m very happy with it. I probably could of got it on without taking my bumper off but with only 4 bolts holding my bumper on it made it easier
everything went as planned. Great help and excellent timely shipment. couldn't be happier.
Absolutely amazed at your customer serv ice!
I haven't open up the box yet will when the time comes I can install it on the car
Best I've seen yetThis base plate "rocks" - fairly easy install (it's kind of heavy and awkward to hold lying on the ground on your back, but I decided to save money and install it myself - a bit hard to "fit," but it did fit) - REALLY, REALLY strong base plate (attaches in 6 places) Very well thought out. I hate to be hit by a Saturn with one of these installed. It's going to be tough to crumble with this much reinforcement!
Ordered on Wednesday received on Friday, installed on Saterday,
Easy straight forward and simple instructions, 2hrs. and 10mins.
to install, and an eight hundred number for any questions,
Service representative was helpful and efficient, all and all a good experience...( 2005 Saturn Vue,4cyl )
I am pleased with the base plate kit for my Saturn Vue. It was easier to install than I thought it would be, but the directions were not quite accurate. It does not fit between the sub-frame and the mount. I had to put it under. Also after cutting the two tabs on the bumper, I found there was no need to cut them. [too late now]. I also realized that after removing the headlight housings, I didn't need to pay $16.00 for a 12 inch bit. I had plenty of room where the headlights were to drill from the top. It did line up just right for the arms to go right through the lower part of the grill.
The 3111-1base plate for my Saturn fit very well and can't be seen when the arms are removed. Wonderful product, and I am extremely happy it.
Installation of the trailer receiver was very easy, fit like a glove, and is very solid. It took about 35 minutes. Instructions were very easy to follow. Great job Etrailer!. And thanks to George from Etrailer for the follow up email. You do a super job.
Mark S.
2/6/2018
Fantastic! Very happy. Perfect fit and easy install.
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Craig A.
10/11/2016
I am very happy with my Roadmaster tow bar, I have used it to tow my car from Tampa to Tacoma, L.A. to Portland MA. and many places in between with no problems, it is very easy to use and set up and that is what I like the best.... I work for a drive-a-way company delivering school buses and trucks around the country during the summer....Thanks for the follow up, Craig, A.K.A. Atlanta Andy