You're towing different trailers, but each needs a different hitch height. This adjustable dual-ball mount switches between 2" and 2-5/16" couplers and stows under the hitch, so you can tow level without swapping hitches.
Switching between trailers can turn into a pile of extra ball mounts and repeated setup changes. This ball mount has built-in 2" and 2-5/16" hitch balls, letting you rotate between trailer sizes in seconds while keeping the same mount in your hitch. Your setup stays ready for different couplers, and trailer changes take less handling before you can hook up and go.
" alt="drop and rise">
Different trailer tongue heights can leave your trailer sitting nose-high or nose-low behind the vehicle. The adjustable height settings let the ball mount slide up or down in 1" increments, with up to 5" drop and 5-1/2" rise, then secure with the included stainless steel pins and clips. You can match your trailer height more closely and tow with the trailer sitting level.
Leaving a ball mount installed is convenient, but it can become an obstacle behind your vehicle when you're not towing. This stowable design lets you remove the pins, rotate the ball assembly underneath the hitch, and secure it back in place. The mount stays installed while taking up less space behind your vehicle, making it easier to move around the rear of the vehicle between towing jobs.
Leaving towing hardware on the vehicle raises the usual concern about someone walking off with the adjustable parts. When used with locking pins (sold separately), the anti-theft design keeps the adjustable arm and 2-ball mount from being removed. Your hitch can stay installed between jobs with the main adjustable assembly secured in place.
If your trailer lineup ranges from lighter utility trailers to heavier loads, the hitch needs to keep up with both. This forged steel ball mount is rated for 8,000 lbs with the 2" ball and 10,000 lbs with the 2-5/16" ball, with a corrosion-resistant coating to protect the finish. Instead of swapping between different mounts, you can adjust the setup for the trailer you're pulling and get back on the road.
Ratings & Reviews
The 5 inch rise was perfect for my stock 2023 F150. This adjustable hitch allows for varying load conditions for 19ft aluminum boat with intent to keep the boat-trailer level while traveling + truck Tailgate can be lowered with 2-3 inch clearance.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.