Cast ball coupler is made of sturdy steel and has a durable silver powder coat finish. eZ-Latch ensures fast, easy, secure hookup and disconnect. Heavy-duty adjustable channel bracket offers 5 different mounting positions. Hardware included.
Features:
Specs:
This coupler features a simple-to-use latching mechanism known as the eZ-Latch. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly lined up with the ball when you lower it, and the rest is automatic. Disengaging the coupler is just as effortless. Simply lift up the handle and the coupler socket will automatically release its grip on the ball.
The contoured, low-profile design of the latch handle helps protect the coupler from damage by allowing any potential hazards - from debris on the road to your ball mount backing into the coupler - to simply slide over the top. This helps prevent anything from getting under the latch handle and releasing the ball, and it can also limit any damage to the coupler should an impact occur
Unlike most couplers, which have a pin hole on the handle latch, the eZ-Latch coupler features a hole on the side of the coupler itself. Inserting a coupler lock through this hole will keep the latch from lifting, preventing disconnect and theft.
Made of sturdy steel, this coupler features a durable silver powder coat finish that is designed to limit rust and corrosion. This finish has a 500-hour salt spray rating, making the coupler perfect for marine use.
The eZ-Latch's sleek, ergonomically designed handle is constructed of an impact-resistant polymer-nylon-resin compound that provides the flexibility and strength needed to bounce back from a collision. The handle is corrosion-proof, allowing it to withstand whatever the road and the elements dish out.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Demco E-Z Latch Trailer Coupler with this 5 position adjustable channel. It fits a 2 and 5/16 diameter hitch ball and has a 21,000 pound weight capacity. This cast ball coupler lets you hook up your trailer to your tow vehicle, provides a connection point for the hitch ball. It does use this easy latch mechanism, which will ensure simple secure hook up and disconnect. This will let you hook up when the latch is in the closed position, just like it is now. Basically you just drop the coupler over the hitch ball and the latch will snap into place. I want to demonstrate that.
I happened to pull, here's a 2 and 5/16 diameter hitch ball. You can see when the coupler goes on top of the ball it'll just automatically fall into place. The latch pops open and then latch is closed. It's locked, ready to go. To remove it from the ball all you have to do is lift up on the easy latch.
Disconnects very simple. This latch, this easy latch is a corrosion proof polymer nylon resin composite latch handle. It's very durable and impact resistant. If you notice on the coupler it gives it a nice sleek low profile design, so that will allow any hazards to simply slip over the top of the coupler, preventing any damage to these latch components. The channel bracket that it attaches to, this allows you to adjust the coupler's height to match different tow vehicles. You can see there's 6 mounting holes on each side of the bracket, so it gives you about 5 different mounting positions.
You can see the coupler will go right down in there, and then just use your nuts and bolts to put it at whatever height you need. This adjustable channel bracket will weld onto your trailer, and then you bolt your coupler to the bracket with the 4 included grade 5 bolts and nuts. The 4 bolt attachment will provide a nice secure rattle-free connection. If you notice there's 2 triangular pieces here. These are the gussets.
Basically what those are used for is when this is welded to your trailer, to give you extra support you just use the gussets, one on each side to give you that extra support. This is all a sturdy steel construction. Now, on the coupler itself it has a nice silver powder coat finish on it, gives you excellent corrosion resistance. Meets about a 500 hour salt spray rating, so it is great for marine use. Does also meet the SAEJ684 certification. The ball sizing in this fits a 2 and 5/16 diameter. The weight capacity is 21,000 pounds. I do want to give you some dimensions. We're going to start with the channel bracket itself. Overall height on the adjustable bracket is 12 inches. The width, which is the inside width is going to be right at 3 inches. The thickness of it is 1/2 inch. Then the mounting holes, they are at 2 inch centers. Center to center from one hole to the other is 2 inches. On the coupler itself, the coupler length from here to here is going to be right at 8 1/8 inches long. The width of it is going to be right at 2 7/8 inches wide. It does have a pin hole for a lock right here so that you can put a pin lock through there to keep the latch from anybody removing it from your hitch ball. The diameter of that lock pin hole is 5/16 of an inch, and the minimum length of the pin lock that you need for this is a 3 inch minimum length. That should do it for the review on the Demco E-Z Latch Trailer Coupler with this 5 position adjustable channel for a 2 5/16 hitch ball and has a 21,000 pound weight capacity.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.