Designed for use with Titan Chain tire chains, these multi-arm, rubber adjusters make it easy to fit, tighten, and maintain the tension on your tractor snow chains.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a quick look at the Titan Chain Multi-Arm Rubber Tire Chain Adjuster for Tractors. This is going to be a heavy-duty pair of adjusters to make sure that you have proper tension on your chains at all times. They're going to have seven arms that are connected by a steel ring, so that'll make sure that if one arm we're to fail, we'll still have the backup of our other six arms to keep that tight tension. That's going to help our tire chains do their job better, since we'll have proper tension at all times, taking up any slack of any give in our tire chains so they stay nice and snug on our tires.These are just simply going to attach to our tire chains with the hooks on the end. You will want to make sure that you have that hook facing out away from your tire, so that you don't cause any damage there. So, the easiest way to do this that I've found is to start with one and kind of move to the next one across, go there and kind of go in a star pattern to make sure that you get this evenly distributed around your tire.
And again, you'll just want to make sure that that hook is facing out and away from your tire face.As far as the dimensions of this, each arm is going to be about 12 1/2 inches, going from the end of the hook to the center of that ring. Going from one end to the other, it's about 25 inches and that's just unstretched, whenever it's sitting in this resting position. It does have give, of course, so that it can stretch and accommodate larger diameters than that. That's just how large it is on its own. We can also fold that up, so it's a little more compact for storage.
In this configuration, it's about 12 inches long. Our center ring or the widest point is about 3 1/4 inches wide, going from outside edge to outside edge there. So, overall, this is going to be a really easy way to make sure that your tire chains work most effectively.One thing to note is that this is designed to be used with tire chains that don't already have a tensioning or adjusting device. So, if your chains have those cams that you flip over, you don't really need to use an adjuster but it never hurts to have a little extra protection on your tire chains. These are designed to be used with one pair of chains, so you'll have one of these on each side of your vehicle.
And again, these are designed to use with chains that fit tractors, so pretty big wheels. That's going to do it for our look at the Titan Chain Multi-Arm Rubber Tire Chain Adjuster for Tractors.
Average Customer Rating: 4.5 out of 5 stars (12 Customer Reviews)
Designed for use with Titan Chain tire chains, these multi-arm, rubber adjusters make it easy to fit, tighten, and maintain the tension on your tractor snow chains.I was a little concerned about sizing since my tractor has 1.69x24 inch tires, but the adjuster fit well without having to overstretch the rubber.
Good price and fast turnaround
I had reservations that the Titan Chain Multi-Arm Rubber Tire Chain Adjuster for Tractors would stretch for my rear 30-inch rim tractor tires.
The front tires have 24-inch rims, and the adjusters were easy to install. The trick to installing the adjusters on the 30-inch rim tires is to have two people to work together. One person to pull from the center ring while the other pull the leg hook end to make the connection to the chain. As shown in the picture below, the adjuster can stretch and reach out to over 36 inches, (shown with a red yard stick). The design of the legs is that of a round cord, not like a flat ribbon buggee cord. This design I believe is better because the cord can distribute the stress more uniformly. The integration of the rubber to the hook and center ring on the ends of each leg is reinforced also. My prior tire chain system consisted of economy grade bungee straps and only lasted one season; the failure point was at the rubber/ hook interface. I believe I made a good choice in buying these adjusters and expect them to last several winter seasons.
While I am very happy I would like to see one more leg on the these larger binders. I feel certain your design team has determine the best number of legs to accomplish the binding of the chains for cos effectiveness but I think one more leg would be better for the largest of your binders
Working great, I have on 3 tractors. quick and easy
Quality is good but it's not super good
Went on easier than I expected on 26" tractor hub chains, but tight enough to keep chains on.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.