This cable stopper for your recovery winch prevents damage and rattle caused by the rope hook hitting against the fairlead, and it prevents the motor from winding the rope in too far. Connect stopper around rope and secure with included hardware.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this Superwinch cable hook stopper for recovery winches. Now, this cable stopper for your recovery winch prevents damage and rattle caused by the rope hook hitting against the fairlead. It also prevents the motor from winding the rope in too far. Now, this stopper is going to connect around the rope, and then it's going to secure with the included hardware that you see here.
This stopper is compatible with wire and synthetic ropes. And let me go ahead and pull out my ruler here just to give you some quick measurements here. It looks like the overall diameter of this is gonna be sitting right at an inch and 7/8. And then the overall thickness, we're gonna be sitting right at 7/8 of an inch. Now, this is going to work with winch ropes that are 3/16 of an inch to a quarter inch in diameter.
And again, you will get the included hardware and instructions as well. Well, that's gonna conclude our look today. I do hope it was helpful for you. Again, my name is Andy. Thank you for joining me..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.