Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace a damaged control pad for your Dometic VacuFlush or MasterFlush RV toilet. Touchpad lets you add water to the bowl and flush away waste. Also monitors your holding tank's levels. Mounting screws and plug-in wiring harness included.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the replacement touch pad for your Dometic VacuFlush and MasterFlush electronic flush toilets. So, this is going to be the control pad for that system. This allows you to fill the toilet bowl with water and then flush everything down with that second button there. The power button at the bottom is going to indicate that the power is on whenever that green light comes on, and it's going to be a solid signal.
Whenever it flashes green, that lets you know that the flush option is changing and the flush mode has changed, so whenever it's in use it'll flash green. The button right next to that, this little light here, that's going to indicate the level of fullness for your tank, so it allows you to never have to worry about overfilling your tank and causing any nasty situations.Whenever it's three quarters of the way full, it should turn yellow. Whenever it's completely full, it'll turn red, and that will indicate to you that the tank is full, and it will also shut off the power to the toilet so that they can't operate and flush and then overfill your tank, so it's saves you some hassle there. Connection at the back is going to go to the table that comes with it. You've got a right angle to mount to the back of that system, so it makes it a little easier to get that in place.This does have a small bracket that will attach to the wall and then you'll mount this over the top of that.
There's also a template in the instructions on how to get this mounted up with the screw mounting holes, and then a hole that you might have to cut out in the wall to mount this in place, but since this is a replacement, you probably should already have that hole in place. You just need something to work for you. It comes with new screws for that. Again, the wiring harness, and this is made in the USA. Does come with instructions, as I said, to let you know how to use that if you didn't already know.But that's pretty much all there is to it for our replacement touchpad for your Dometic VacuFlush and MasterFlush RV toilets.
If you need any other replacement parts, you can always turn to us here at etrailer.com. We have a lot of options available, so check it out. Thanks for watching.
I think etrailer does a fantastic job having just about everything you need, and getting it to you promptly at a good price.
For this item, however, I am a bit disappointed. It is a simple electric device - there are NO electronics in it whatsoever. It is a simple "contact" when you push the button. The price (MSRP) Dometic charges for it is outrageous, and IMHO it should last longer than 3 years. Your drip coffee maker is way more complicated, and you could get 6 of them for the same price. The touch pad is what fails, but they force you to buy the cord as well (also something very simple that should cost $5). etrailer is AWESOME, with the lowest price to be found anywhere, but Dometic, not so much. The replacement we ordered worked great, just plugged it into the existing cord and snapped it into the existing bracket, and it's working fine. We ordered a second one so we're not caught again with a toilet that won't flush. As full-time travelers it's difficult to purchase things like this on the road, and even more difficult to troubleshoot and make sure you're getting the right solution for the problem.
It worked as advertised, but all we needed was the touchpad, there was nothing wrong with the wiring. Our only complaint is that this little ELECTRIC device - it's not electronic by any stretch of the imaginaton - costs as much as it does. It is two "contact points" that make the toilet flush or add water, very simple. Probably costs Dometic less than $5 to make. The board in your coffee maker is way more complicated, and you can get a coffee maker that starts itself in the morning for under $25. Why this touchpad should cost $165 or up to $200 elsewhere is basically a crime. Shame on Dometic, but kudos to eTrailer for a competitive price and excellent customer service.
Denise
2/13/2025
Its still working as it should the one that came in the RV lasted less than 3 years. Being a critical component of our RV, which we live in full-time, we purchased a back-up too.
Jon G.
2/13/2025
E-trailers website is easy to navigate and makes the purchase process very easy. They usually have the products I need in stock which is a plus. This touch pad was exactly what we needed to repair our marine toilet. Installation was easy and it functions perfectly
The product was an exact replacement for my defective one. E-Trailer had the part and sent it to me in a timely manner.
Jim
8/22/2024
The flush valve has worked flawlessly since it was installed.
Very prompt service. Exact part I need for my macerator toilet.
Just what I needed to fix toilet, it came just at the right time.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Denise
3/30/2025
After a year the replacement touchpad is still working. Once in a while we touch it and it ignores us, which makes our hearts skip a beat, but then a firmer press and it works. So far so good.