Arched Loading Ramp - Center Fold - Aluminum - 90" Long x 18" Wide - 1.5K

See what our Experts say about this Stallion ATV Ramps

• Longest Set of Folding Ramps for Loading Generator in Truck Bed
  The longest folding ramps we have for you is the Arched Loading Ramp Set part # 288-07432 for 1 or part # 288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed is not too steep. They are reasonably priced and very lightweight weighing in at only 23.5 lbs per ramp. The great thing about these ramps is that they have cam buckle safety straps that prevent the ramp from sliding out during loading and unloading.
  view full answer...
  
• Can The Trailer Valet Climb a Ramp Into The Bed Of a Truck Rather Than Lifting?
  Yes, the Trailer Valet RVR9 Remote-Controlled Trailer Dolly # TVRVR9 will climb a loading ramp like the # 288-07432 into the back of your truck. I confirmed this with Trailer Valet to ensure that it did not have an out of level sensor that would stop it from working on the ramp. Be sure you are using a ramp that is wide enough as the dolly is 19" wide.
  view full answer...
• How Wide to Loading Ramps Come?
  Ramps come in different sizes. The Replacment Gen-Y Hitch 72" Aluminum Loading Ramp # GY96FR is 14 inches wide. Here are some other widths of other ramps: - CargoSmart Loading Ramp - Aluminum # 3483075 (50 inches wide). This is the widest ramp we carry. - Arched Loading Ramp - Center Fold - Aluminum # 288-07432 (18 inches wide) - Erickson Arched Loading Ramp - Center Fold - Steel - 80" # EM07464 (11 inches wide) The size of the ramp really depends on the purpose of use. Also, some ramps...
  view full answer...
• Can You Buy Just One Arched Loading Ramp
  Yes, a single arched loading ramp is part # 288-07432. Please keep in mind the weight rating of a single ramp is 1,500 lbs compared to 3,000 lbs for the set. The set is part # 288-07432-2. I have attached a video for your reference.
  view full answer...
• Recommended 18" Wide Loading Ramp
  I may have another option but the we do not have a ramp or ramp set that is 57" long x 18" wide. The only 18" ramps we have is the Arched Loading Ramp # 288-07432 which is 90" Long x 18" Wide and utilizes a center fold design for compact storage. This is one single ramp, if you need two ramps use # 288-07432-2. i included a video of the Arched Loading Ramp # 288-07432 for you to take a look at.
  view full answer...
• What Motorcycle Frame Tube and Frame Width Do the B&W Biker Bar Motorcycle Tie-Down System Fit
  The B&W Biker Bar Motorcycle Tie-Down Systems we carry are only designed to fit certain models of Harley-Davidson and have not been tested for other bikes like your Kawasaki Vulcans. It is possible they can work with your bikes if they have double tubes but you will need to know a couple of dimensions, the frame tube diameters and the frame width. The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring # BWMC2301 requires a frame tube diameter of 1-1/8" to...
  view full answer...
  
• How To Get A 90" x 54" Loading Ramp For Loading Snowmobile
  We sure can! To get 3 of the Arched Loading Ramps 90x18" you will need the # 288-07432-2 you were looking at that includes two ramps, and the the # 288-07432 which is a single ramp. These 3 combined will give you the 54" width you are looking for. These ramps have a load rating of 1500lbs each and would be a great option for loading your snowmobile. I included a video of these products for you to take a look at.
  view full answer...
• Width Between The Shoulder Uprights On Arched Loading Ramp # 288-07432
  The Arched Loading Ramp # 288-07432 is 17-5/8" between the shoulders on the sides of the ramp. You will have about 9/16" left on each side of your 16-1/2" wide generator using the single ramp.
  view full answer...
  
• Ramp Option For Trailer With 4 Tapered Bumper For Garden Tractor
  I do have an option for you but all of the ramps like part # 288-07432 that we carry will not attach the tapered wide bumper that you have in your photo. I recommend to use ramp ends part # 288-07400 on the rubber bumper then you can use 2" x 8' boards as your ramp. These ramp ends measures 5" long and 1" deep.
  view full answer...
  
• Options for Aluminum Loading Ramps
  We have a variety of ATV single ramps, like the Arched Loading Ramp # 288-07432, as well as ramp sets, like the Gen-Y Hitch # 325-GH-R84, that have an aluminum construction. If you can let me know what you're planning on using the ramp for I'd be more than happy to help you figure out which one we can supply you with. I've also attached a link to our aluminum ramp options for you to filter through.
  view full answer...
• Can Air Be Released From Timbren Axle-Less System to Lower Ground Clearance
  The Timbren Axle-Less Trailer Suspension Systems, like the 3,500 Pound # A35RD545 that you were looking at, feature independent AEON springs for load support. These are not air springs but durable hollow rubber springs, so they aren't something that you can adjust the air pressure for or empty out when needed to decrease your ground clearance. This particular system does have a 4" drop spindle though, which will lower the overall deck height of the trailer for easier unloading/access....
  view full answer...
• Could MaxxTow Hydraulic Pickup Truck Crane # MT70238 Be Used to Lift Generator into Rear of SUV
  Yes, the MaxxTow Hydraulic Pickup Truck Crane # MT70238 can be used to help lift a generator into the back of a Chevy Suburban. It's hard to say if the crane arm would interfere with the door opening but at the very least it would get the generator at the right height where you could then push it the rest of the way into the rear cargo area of the SUV.
  view full answer...
• How Long of a Ramp Is Needed for Loading Harley in Truck Bed
  In general for ramps used to load a Harley you want to go with a ramp that is three times as long as the height of the truck bed. So if that number was 30 inches the Arch Loading Ramp part # 288-07432 would work great as it measures 90 inches and has a 1,500 lb weight capacity. This is our longest single ramp we offer though.
  view full answer...
• Could Arched Loading Ramps part # 288-07432 Help Loading a Can Am Spyder
  Using three of the Arched Loading Ramps part # 288-07432 that you referenced would most likely work great as the ramps are long and arched which allows them to help prevent "high centering" as they motorcycle makes the transition from ramp to trailer. These are 90 inches long though so you'd have to compare that to your toy hauler to know for sure. Since I don't know how tall your trailer is or how long the ramp is it's hard to say how much different this would be.
  view full answer...
• Rung Spacing of Arched Loading Ramp - Center Fold - Aluminum - 90" Long x 18" Wide
  The rung spacing of the Arched Loading Ramp part # 288-07432 is about 5", the ramps are primarily designed for ATV tires so a better option may be the CargoSmart S-Curve Loading Ramp Set part # 3483086-2 which would work much better with smaller wheels.
  view full answer...
• Recommended Loading Ramps for a Motorcycle with a Sidecar
  With how wide you set up is with the side car, I suggest going with the Erickson Arched, Aluminum Loading Ramp Set # EM07486. Most of the long sets like this are designed to be used on a trailer or truck bed that is no higher than 35 inches, but this one is not limited at all. This is also rated up to 3,000 pounds and are 90 inches long by 12 inches wide. The only downside to these are that they are not folding.
  view full answer...
  

Do you have a question about this ATV Ramp?