ARC Xtreme LED Light Bar Kit - 20,400 Lumens- Spot/Flood Mixed Beam - Double Row - 30" Long

Video Transcript for Detailed Breakdown of the ARC Xtreme LED Light Bar Kit

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Arc Xtreme 30" long LED mixed beam light bar kit. Now this is an offroad LED light bar. Shines a nice bright white mixed spot and flood beam so that you can see the trail at night or in bad weather. This is a combination beam, so it increases visibility in front of you and off to both sides. The spot beam is for in front of you.

That gives you a distance of about 2,263 feet. And the flood beam is for the sides, gives you a width about 229 feet. And this light board uses 60 LEDs which will provide about 20,400 lumens of light. Now I do have this hooked up to some 12 volt power. I do want to show you how bright this is so we'll go ahead and, comes with the wiring harness with a rocker switch on it.

And it is a lighted rocker switch that will light up when you turn it on. So we'll go ahead and flip it to the on. You can see the red light lights up, our light lights up. And we'll go ahead and turn off the overhead. And there, you can see how bright it is.

And again, if I just lift this up and move it around, you'll be able to see how bright a light lights up very, and again, it is a combination of spot and flood beam. It is 60 LEDs. And then again, we'll just take our rocker switch, go ahead and turn it off. And again, you'll see you turn it on. And your red light lights up And turn back on overhead lights, turn off our light.

Now the light itself, it's a durable polycarbonate lens on it, which is impact and shatter resistant. The housing the light is in is a black powder-coat aluminum housing, it'll resist corrosion, help dissipate the heat. And it has an IP67 rating to protect against dust and moisture. To install this, it's a pretty simple installation on your roof, roll bar, grill guard, or bumper. It does include both side mounting brackets and bottom mounting brackets, can see right there. And I have 'em both installed. You can use both of 'em if you want or you can use 'em individually. If you just wanna use the side brackets that'll work, just the bottom ones that'll work, whatever fits your application. So it gives you different installation options. The hardware for is included also to install it. And what's nice about these mounting brackets. When you install 'em it allows you to tilt the light to change the angle of light as needed. Now, this one is a 30" long light. We do also sell this in a 20" long light. We, that's sold separately. Now I did mention the wiring harness here that's included. I do want to disconnect this and talk about the wiring harness. And we'll disconnect it from the power. But basically you can see this wiring harness that comes with it. Now, this wiring harness does include the triple sealed, 2 pin Deutsch DT connector. That's designed right here to plug into your light, just like that, clicks in place, you're ready to go. To remove it, push down. So it comes with the connector, comes with the rocker switch we mentioned. Again, I'm gonna put it out here so we can see it. There's the lighted rocker switch again. When you turn it on or off, on the light it'll light up also. Comes with a relay. This is an HID relay that's included. And then the lead wire that connects to your battery, you notice it has the two wires with the ring terminals on it and it is fused to protect it. But this wiring harness is included, comes with this kit. Now this light, it is intended for offroad use only. And this light does not meet the Department of Transportation or SAE standards. It is for a quantity of one light bar. The lumens again is 20,400. Total LEDs, 60 LEDs and it's six watts per LED. So it's gonna give you a wattage of 360 Watts at 13.6 volt DC. And the last thing I'm gonna do is just give you dimensions on this. So we're gonna zoom in a again and we'll get our tape measure. Overall length, this edge to this edge, 32" long. The depth on it front to back, 2" deep. And the height, I'm first gonna measure the height of just the light. Bottom to the top of the light bar is 2 3/16, or 2 13/16", just under three inches. And if we measured with the mounting brackets. So from the bottom or from the table to the top of the light, about 3 1/2" tall. But that should do it for the review on this Arc Xtreme 30" long LED mixed beam light bar kit..