Vehicle Style: 2500 LD - 8 Foot Bed Change
Fifth Wheel Hitch: DM8550043
Price: $729.00
Installation Rails: DM8552009-71
Price: $331.08
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Universal Install Kit DM8552009-71
Above Bed Rails
4.5 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
More Information >Fifth Wheel Hitch: BWRVK3500-5W
Price: $1,099.00
Installation Rails: BWGNRK1059-5W
Price: $599.00
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit BWGNRK1059-5W
Below Bed Rails
4 Hour Estimated Installation Time
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
More Information >Fifth Wheel Hitch: DM8550045-5W
Price: $839.00
Installation Rails: C60712-5W
Price: $519.55
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C60712-5W
Below Bed Rails
3.5 Hour Estimated Installation Time
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
Hitch does not fit Cab and Chassis or vehicles with 34 inch frame
More Information >Fifth Wheel Hitch: C86JR
Price: $749.95
Installation Rails: C16418-204
Price: $276.89
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C16418-204
Above Bed Rails
4.5 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Tech Tip:
Drilling is required on long bed models to make one hole in the frame on each side for bracket attachment.
More Information >Fifth Wheel Hitch: C16130
Price: $781.59
Installation Rails: C16418-204
Price: $276.89
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C16418-204
Above Bed Rails
4.5 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Tech Tip:
Drilling is required on long bed models to make one hole in the frame on each side for bracket attachment.
More Information >Fifth Wheel Hitch: C16140
Price: $898.95
Installation Rails: C16418-204
Price: $276.89
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C16418-204
Above Bed Rails
4.5 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Tech Tip:
Drilling is required on long bed models to make one hole in the frame on each side for bracket attachment.
More Information >Videos
for Fifth Wheel Hitch
Help Articles
for Fifth Wheel Hitch
Expert Answers
for Fifth Wheel Hitch
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…
view full answer...Hey Steve, so between the Curt #C16265 and the Pullrite #PUL36ZR I'd go wit the Curt but not the Q25. I'd go with the A25 #C24FR, which is basically the same thing as the Q25 but does not…
view full answer...Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced…
view full answer...The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…
view full answer...As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base…
view full answer...The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height…
view full answer...There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw -…
view full answer...The Patriot Slider part #BWRVK3270 might be a bit more noisy than the Companion slider part #BWRVK3400 due to the increased number of mounting points, 4 at the corners vs. 1 in the center. Probably not that noticeable and certainly not something…
view full answer...