To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This setup takes the strain out of hitching. The coupler bolts around your trailer’s king pin to create a new connection point for the included ball adapter. That adapter drops right into the hitch head’s open funnel, which guides it smoothly into place so you can hook up faster and see what’s happening from the cab.
When you’re done towing, this hitch won’t hold your truck bed hostage. The base weighs just 79 lbs and lifts out easily without special tools. You can remove it in a few steps and get back to hauling lumber, gear, or whatever project comes next—all without needing extra hands.
Whether you’re hauling big miles or short trips, this hitch gives you solid performance every time. It’s rated for 24,000 lbs gross towing weight but limited by the included installation kit to 20,000 lbs GTW with a 6,000 lbs vertical load limit. The black powder coated steel construction is tested to SAE J2638 standards for durability over the long haul.
Not every trailer sits the same, and that’s where the adjustability comes in handy. Multiple height settings let you dial in a level towing position, while the built-in 7-1/2" offset helps you find the right fit between truck and trailer. It’s an easy way to keep things lined up and stable as you roll down the road.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the PullRite custom installation kit with the base rails for your fifth wheel trailer hitches. It has a 20,000 pound gross towing weight capacity. Now, this is a custom fit part. It is designed to fit the 2020 and newer Chevrolet Silverado and GMC Sierra 2500 and 3500 trucks with the 6-3/4 foot bed and without the OEM prep package. And on a custom fit part like this, I do like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show you if this will work for your application.
Now, the installation kit here will let you mount your fifth wheel trailer hitch into the bed of your truck. The mounting brackets, which I've installed here on the sides, these mounting brackets install beneath your truck bed. And they provide the attachment points for these above bed base rails. The base rails, both of these here, provide the necessary mounting points for your fifth wheel hitch to attach to. Now, the custom fit mounting brackets, these are designed to mount to existing holes in your vehicle's frame to help minimize drilling and measuring, reduces installation time, and it'll even help avoid known obstacles along your truck's frame.
Now, one of the best features on these PullRite brackets are the built-in tabs. That'll be just below, they're on the top of the mounting brackets just below these bolts on each corner. And I want to zoom in and show you where they're located. It's hard to see them because they're underneath, but they're right in here. And what's nice about those tabs, they eliminate one of your biggest problems when installing mounting brackets to your vehicle, which is how to keep the nuts in place when installing the bolts of the mounting brackets.
And basically what they look like, if I pop up this insert, that's the underside, you'll see that tab there. It's a thinner metal. You'll be able to bend that down, slide the nut in there, and then when you put your bolt in, tighten it down, that tab with the slot in it will hold the nut in place. So it allows you to tighten your bolt down without having to access underneath there 'cause usually the problem on most when you install them, like I mentioned, is accessing that nut and bolt to tighten it all down. This makes it a lot easier because once you put that nut in there, all you have to worry about is tightening that bolt down.
Now, this kit is compatible with PullRite, B&W Patriot, the CURT, the Demco, the Draw-Tite, Hidden Hitch Husky, and even the Reese above-bed fifth wheel hitches. They do use a black powder coat steel, which is corrosion resistant. Does come with the two base rails, the custom mounting brackets, all the hardware you need for installation, and a nice set of detailed installation instructions on how it all goes together. These parts are made in the USA. And again, the gross towing weight capacity is 20,000 pounds. But that should do it for a look at the PullRite custom installation kit with these base rails for your fifth wheel trailer hitches.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.