Replacement Hub for 2002 EZ Loader Boat Trailer With BT-150A Hub
Updated 12/01/2025 | Published 11/06/2025
Products Featured in This Question
Question:
I am trying to determine correct fitting to replace my wheel hubs. I have an 2002 EZ Loader boat trailer. Single axel. I removed the wheel, Bearing Buddy, Front bearings and hub assembly. There were no item numbers on the wheel bearing to reference. Its a 5 on 4 1/2 bolt pattern for the wheel. Idle hubs. Caliper reading on shank long portion is about 1.065 in. I can take more readings if necessary. Thank you.
asked by: Brett S
(click to enlarge)
(click to enlarge)
Expert Reply:
Hi Brett; were you able to find some more information on your hub and bearings? I see you ordered the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K. This is designed for 3,500 lb axles with a # L68149 inner and # L44649 outer bearing.
In the one picture it looks like you have a straight spindle and in one of the hub pictures it is marked BT-150A. This information, along with your measurement, indicates you need a hub that uses # L44649 inner and outer bearings like the # AKIHUB-545-2-G-EZ-2K instead.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Bearing Buddy Bearing Protectors - Model 2080T-SS - Threaded - Stainless Steel (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 2441T-SS - Threaded - Stainless Steel (Pair)
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Q&A: Bearing Buddy Recommendation to Replace Grease Cap that is 2.080 inches
- Q&A: Does Bearing Buddy Threaded Bearing Protectors # BB2080T-SS Fit Reliable Oil Bath Hubs
- Q&A: Reverse Light PIn on a 7-Way Trailer Connector
- Shop: Bearing Buddy Bearing Protectors - Model 2717A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 2717 - Chrome Plated (Pair)
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Video: Review of the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM31202
- Video: Complete Breakdown of the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Can 4.80-12 Tire be Replaced with ST145/R12 Tire Using the Same Wheel
- Q&A: What is the Difference Between the Kenda S-Trail and Kenda KR25
- Q&A: Changing from Oil Baths to Bearing Buddies on an EZ Loader Boat Trailer
Robin H.
12/1/2025
Hey Brett, how did things go with the Easy Grease hub for your EZ Loader trailer? Did the 2K hub with the L44649 bearings end up being the right fit? Your update could make it easier for others working on similar trailers.