Interior Frame and Control Knobs for a Dometic FreshJet 3 Air Conditioner

Question

Question:

I need the interior frame with knobs for my DMC39ZR. It a dometic RV 13500 BTU

asked by: Herve J

0

Expert Reply:

Hey Herve,

Sounds like you're looking for the Air Distribution Box # DMC79ZR for your Dometic FreshJet 3 # DMC39ZR.

If you're talking about something else, please let me know and I'll be more than happy to look into it for you!

expert reply by: Jon G

0

Answer 1

Hey David, the Air Distribution Box part #DMC79ZR only works with the Dometic FreshJet 3 AC units like the part #DMC39ZR and will not work with an Advent air.

view full answer...

Answer 2

Hi Ken; I don't have a reading from that exact distance but I can tell you the noise level of the Dometic Penguin II Low Profile RV Air Conditioner #DMC86ZR is around 62dB. If noise is your main concern, the Dometic FreshJet 3 RV Air Conditioner…

view full answer...

Answer 3

Hey Rick! To swap out your Coleman AC with one of the new Furrion Chill Cube units we have a couple of options for you that include everything you'll need. You have to swap out your Coleman air distribution box because the older stuff isn't…

view full answer...

Answer 4

Wayne, it does not look like the Greystone Built-In RV Convection Microwave #GR27FR include a mounting bracket. I actually wasn't able to find one at all for that model. They make one for their smaller #324-000106 microwave, but nothing for the…

view full answer...

Answer 5

Hey Jack, the Furrion Chill HE RV unit like the part #FR52PR is going to be your best solution. It is the quietest and draws the lowest amount of power at 11.2 amps compared to most similar options that are around 15. We've tested all of the…

view full answer...

Answer 6

The Furrion Chill HE #FR42PV is just going to be a replacement rooftop unit only. Since you have a heat strip which has failed you might consider switching to the Furrion AC System #FR55PV and their Heat Strip #FR27PR. This would make everything…

view full answer...

Answer 7

The part you need for your Furrion RV Cooktop - Propane - Triple Burner - Stainless Steel, part #FGH4ZSASS, is the Replacement Gas Inlet Connector and LP Regulator Inlet Assembly for Furrion RV Cooktop, part #FR97PR. I have included a product…

view full answer...

Answer 8

The trim kit of the High Pointe RV Convection Microwave #HP99ZR would be used if you were going to mount it in a cut out area. Otherwise you can set it on a shelf like you mentioned. The trim kit would allow it to install using screws. It does not…

view full answer...

Answer 9

We have a replacement converter section for your WF8955 with the part #PD4655V but this is not compatible with Lithium batteries. For a new converter and panel that would be compatible with lithium batteries at some point in your future you'd…

view full answer...

Answer 10

Your R-pod has a Dometic system with a low profile that is 13,500 btu. The Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners - White #AT3308046006 is what I believe you need for your shroud. I've linked a video to…

view full answer...

Answer 11

I do not recommend using a molly bolt to attach the extension rod brackets on a Solera RV Slide-Out Awning like part #LCV000165063. The bottom line is that you need to find the backing and attach the extension rod bracket to this as there would not…

view full answer...

Answer 12

Hey Herve, Sounds like you're looking for the Air Distribution Box #DMC79ZR for your Dometic FreshJet 3 #DMC39ZR. If you're talking about something else, please let me know and I'll be more than happy to look into it for you!

view full answer...

Interior Frame and Control Knobs for a Dometic FreshJet 3 Air Conditioner

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching