Replacement Parts For The Yakima HoldUp EVO Bike Rack

Question

Question:

looking for the locking/adjusting hardware for the yakima hold up evo bike rack. rear ender accidant bent it all. spine is good, shank may be ok but the mechanism is all bent. Do you sell the hardware? thanks

asked by: Aaron F

0

Expert Reply:

Hi Aaron,

Are you referring to just the speed knob # 8880904 or the tilting mechanism? If you're needing the tilting mechanism then you'd have to replace the shank as well with part # 8880824. If you're referring to something else and want to send me some pictures I can see if a replacement is available.

expert reply by: Kevin C

0

Aaron

6/9/2024

Hey Kevin, thanks for the follow up and sorry for my delayed response. In response to your question, I am referring to the tilting mechanism that adjusts by dropping into the cutout slots on the shank. It appears as if our shank (8880826) is ok but all the lighter gauge steel (handle, foot release lever, spring) is what was damaged. I don't see those parts available for purchase. Are they? I will work on getting some pictures of it too. Thanks

Reply

Kevin C.

6/10/2024

@Aaron It looks like the components you're needing for the tilting mechanism aren't sold separately so you'd have to purchase a whole new spine assembly # 8880824 in order to replace the tilting mechanism.

Reply

Aaron

6/10/2024

Ok, bummer. But thanks for the follow up Kevin. Have a good day

Reply

Answer 1

The differences between the Yakima HoldUp #Y02443-2 and the HoldUp EVO #Y02479-2 include an integrated SpeedKnob to take out movement of the bike rack, an easier system for tilting the bike rack, and the ability to add fat bike tires (up to 5"…

view full answer...

Answer 2

The Replacement Hitch Hardware for Yakima HoldUp or BigHorn Bike Racks Manufactured in 2008 or Later #8890260 is the internal anti-rattle you find in the more recent model years. This is the same pin as the #Y8890200 which was not threading correctly…

view full answer...

Answer 3

I definitely have some options so that you can use your Yakima Hold-Up EVO Bike rack #Y02480, but the reason Yakima does not recommend using an adapter with this bike rack is because most hitch adapters reduce the weight capacity of your hitch by…

view full answer...

Answer 4

In order to use the Yakima HoldUp EVO 2 Bike Rack for 1-1/4" Hitches #Y02480 with a 2" trailer hitch receiver you will actually need to swap out the current tongue with part #8880826. The HoldUp doesn't have provisions for an adapter…

view full answer...

Answer 5

Curtis, it does look like the only hitches offered for a 2024 Subaru Outback Wagon like #DT73RR are going to be class III hitches which are going to have 2" receivers. If it's an accessory you're trying to use that only works with a 1…

view full answer...

Answer 6

Yes the Replacement Tongue for Yakima SingleSpeed 1-Bike Platform Rack part #8880841 is designed to work with the original 2" adapter sleeve supplied with the rack from Yakima.

view full answer...

Answer 7

The correct adapter sleeve for your Yakima #Y02481 SingleSpeed bike rack is part #Y8890342. The sleeve includes the M8 Allen bolt and wrench.

view full answer...

Answer 8

In order to convert your Yakima HoldUp #Y02445 to be compatible with a 2 inch hitch, you would only need the Replacement Tongue for Yakima HoldUp Bike Racks #8880580, which is a 2 inch tongue.

view full answer...

Answer 9

The Yakima HoldUp 2 Bike Rack for 2" Hitches - Platform Style - Tilting #Y02443 is different from the Yakima HoldUp EVO 2 Bike #Y02479 in a couple ways. The original could hold bikes up to 60 lbs each versus the EVO holding up to 50 lbs per…

view full answer...

Replacement Parts For The Yakima HoldUp EVO Bike Rack

Product Page this Question was Asked From

Continue Researching