bing tracking image
Customer Service My Orders
Q & A Icon

MORryde Suspension Enhancement For a 2022 Grand Design Transcend 265BH  

Published 05/29/2024

Question:

I have some general questions about some upgrades that I am doing to my 2022 grand design transcend 265bh. I am upgrading to the morryde cre3000 and wet bolt kit and looking for any additional recommendations you may have to add. Also I am upgrading the tires to transeagle cr225/75-15 12ply and I am putting them on the factory steel wheels. I am trying to find out with my 7300lb dry weight tandum axle camper what the recommended cold psi should be and I cannot find any type of inflation charts. And would you recomend that I upgrade the valve stems from the rubber to a bolt on. Just looking for recommendations and a bit of guidance. Thank you for your time Jerry

1

Helpful Expert Reply:

You are already on a great path Jerry for your 2022 Grand Design Transend 265BH. The MORryde CRE3000 # MR87ZR equalizers along with the Wet Bolt Kit # MR46ZR are a great starting point. I would look at adding the MORryde X-Factor Crossmember # MR33WR to the center hanger to help give the suspension some lateral support and reduce stress when turning.

As far as the tires the only company I am aware of that gives different pressure ratings based on load is Goodyear so unless Transeagle tells you otherwise you will want to run the maximum cold PSI given on the side of the tire. For the valve stems if you are using rubber then I always recommend having them replaced with the tires. If you want to upgrade to Steel Valve Stems # AM20906 you can easily have that done when they change the tires. These are less likely to become damaged than the rubber stems over time.

expert reply by:
1
Bud M
Ask The Experts a Question >>

Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for MR88RR
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>