Recommended Replacement Disc Brake Assembly For A 2008 Shorelandr Boat Trailer
Products Featured in This Question
Question:
I have a 2008 shorelander marine single axle 3500lb trailer which currently has severely rotted rotors and caliper. Part Number SK0107 which is a integral hub but oem is only zinc coated not good for salt water. Shorelander SK0046 is the oem part number for calipers. I am. I am looking for replacement kit what are my options ? 1 3/8 to 1 1/16 I believe is the tapered bearing size. And are original brake line gonna fit ? Please let me know your recommendations
asked by: Brandon D
Expert Reply:
Hey Brandon,
Based on the information you've provided I recommend the DeeMaxx Disc Brake Kit # DE66YR. This disc brake kit has a corrosion-resistant "Maxx" coating finish on the hub/rotors, calipers, and brackets for a salt spray rating over 1,000 hours. It uses the same bearing sizes and and has the same wheel bolt pattern at 5 on 4-1/2. The brake lines should connect to the inlet on the caliper but they do sit a little lower than the original calipers. I've attached a video below where Brad will show you the difference DeeMaxx brakes offer.

Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Q&A: Where Does O-Ring of Dexter Vault Kit # DX52UR Go
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Search Results: de66yr
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Curt Cold Weather 7-Way RV Style Connector - Trailer End - 10' Long - RV Standard
- Search Results: dexter vault
- Video: All About the Kodiak Ceramic Brake Pads
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Shop: Dexter Vault Hybrid Lubrication System for 2,500-lb to 3,500-lb Trailer Buddy Axles
- Q&A: Does 3,500 lb E-Z Lube Spindle Work With 3,500 lb DeeMaxx Disc Brake Kit
- Shop: Replacement Caliper for Dexter 10" Brakes - Passenger's Side
- Q&A: How to Convert Trailer Drum Brakes Over to Disc Brakes
- Video: A Closer Look at the 7-Piece Installation Set for Bearings, Races, and Seals
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Video: Kodiak Disc Brake Kit: The Breakdown
- Video: Feature Review Kodiak Disc Brakes
- Search Results: caliper rebuild kit
- Search Results: disc brakes
- Video: DeeMaxx Disc Brake Kit Review
- Q&A: Recommended Replacement 10" Disc Brake Kit for a Coyote Trailer for Saltwater Application
- Q&A: How Tight Should Shackle Bolts Be Tightened On Trailer
- Search Results: 3500 hub
- Search Results: tandem hanger kit
- Q&A: Will the Kodiak 225 Calipers Be a Direct Replacement for a TDE 46304 Caliper
- Q&A: Replacement Bearing Kit and Brakes for a 2003 Boat Trailer with 3,500 lb Axles
- Search Results: de36vr
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub