Keyed Alike Trailer Coupler Lock for Demco EZ-Latch Coupler System

Question

Question:

Would like several of the trailer latch locks keyed alike for the Demco EZ Latch 2.0 and 2 5/16

asked by: Tripp H

0

Expert Reply:

Thanks for reaching out, Tripp!

To get multiple locks keyed alike that are compatible with the Demco EZ-Latch you'll need to go with our etrailer Surge Brake Coupler Lock # e98888 - just be sure to choose the "keyed alike" option from the drop down menu prior to placing your order.

The InfiniteRule Lock for Demco EZ-Latch Trailer Couplers # IR66FR you were looking at is keyed unique so we don't have a way to get that specific lock keyed alike for you.

expert reply by: Jon G

0

Answer 1

Hey Pete, the locking bar that runs through the Trimax Puck Locks part #TMX63FR is recessed enough that it would be a tight fit and not loose like what you tried.

view full answer...

Answer 2

Entry door locks, like the Bauer Products #BA64FR, typically will have a sticker on the inner handle portion that sits inside your RV, but I have installed a few where they also have the key code on a sticker on the inner components of the handle.…

view full answer...

Answer 3

To know exactly what key will fit your enclosed trailer's access door lock we'll need to know the brand and the key code. For example, since you were looking at a Bauer door lock, if your key code was 357 then you could use the Replacement…

view full answer...

Answer 4

Yes, you can so long as your Demco EZ latch coupler is cast like item #DM14040-81 or item #DM37ZR. The InfiniteRule Lock for Demco eZ-Latch Trailer Couplers item #IR66FR works great with these couplers whether they're being towed or parked.

view full answer...

Answer 5

The Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K #DM14040-81 has an integrated 5/16 inch pin hole with a 3 inch span for that lockable feature. I recommend using the Trailer Coupler Lock #e98888…

view full answer...

Answer 6

The Trailer Coupler Lock #e98887 will work with a UFP A-60 coupler like your Dexter A-60 #DX56FR. The product picture for this lock shows it being used on an A-60.

view full answer...

Answer 7

We do have locks that will work with your Dexter A-60 Brake Actuator #DX56FR. The Coupler Lock #e98888 will allow you to secure the trailer to your vehicle when towing. This lock pin replaces the included push pin which comes with the actuator. For…

view full answer...

Answer 8

I don't have a wiring diagram, but I'd be happy to explain it for you. In order for the reverse solenoid on a Hydraulic Brake Coupler like #DM62VR to function, one of the two wires leading from it needs to be connected to the wire from the…

view full answer...

Answer 9

The Demco Hydraulic Trailer Brake Actuator #DM72VR is the replacement for your Demco DA66B brake actuator. They have the same 2" coupler for drum brakes and attaches to a 3" channel with bolt holes spread 3" for mounting. This coupler…

view full answer...

Answer 10

Yes, you can use a coupler pin or safety pin with the Demco Trailer Coupler #DM14040-81. A pin like the #37201211 will fit the 5/16" pin hole or you can use the etrailer Surge Brake Coupler Lock #e98888 if you want even more security.

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Keyed Alike Trailer Coupler Lock for Demco EZ-Latch Coupler System

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching