Are There Other Brackets to Lower Factory Running Boards on a 2022 GMC Sierra or What Can Be Done

Question

Question:

I have a 2022 gmc HD crew cab AT4. Looking for a mount that will lower my existing factory running boards. They now fit directly under the door frame.

asked by: Steve B

0

Expert Reply:

The mounting hardware for running boards are specific to both the running boards and the truck. We are not going to have alternate mounting brackets that will work to lower your factory running boards because of this and likely the only way to lower the factory running boards would be to fabricate something.

The best option that we would have would be a complete new set that already sits lower, like the Westin R7 Nerf Bars # 28-71275.

expert reply by: Scott S

0

factory running boards on a 2022 GMC Sierra
(click to enlarge)

Factory running board bracket on a 2022 GMC Sierra
(click to enlarge)

Alt view of mounting bracket for factory running boards on a 2022 GMC Sierra
(click to enlarge)

Alt View of mountg bracket for factory running boards on a 2022 GMC Sierra
(click to enlarge)

alt view of facotry runnig board bracket on a 2022 GMC Sierra
(click to enlarge)

alt view of a mounting bracket for factory running boards on a 2022 GMC Sierra
(click to enlarge)

alt view of factory running boards on a 2022 GMC Sierra
(click to enlarge)

Answer 1

The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work well…

view full answer...

Answer 2

For lubrication that won't attract dirt and debris you'll want to use a white lithium solution like the LubriMatic White Lithium Grease #L11354. This grease will lube your Retrax Tonneau Cover's rails and help prevent corrosion without…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Congrats on the new truck! The Curt RockerBall Multi-Fit Ball Kit item #C78ZV will work great with the puck system in your new 2025 Sierra 2500. It's been specifically designed to work with all the OEM puck systems so the difference in…

view full answer...

Answer 8

I do have a couple options that will work for you, but unfortunately there isn't one perfect option that provides everything you are looking for. I have included the options below, along with some of the things that make them work or not work for…

view full answer...

Answer 9

Hey Justin, so I checked with B and W and they only have fits that run up to 2024 BUT since we know they 2024 and 2025 trucks are unchanged in terms of gooseneck hitches we know the Turnoverball part #BWGNRK1020 is a fit and will work great.

view full answer...

Answer 10

Hey Tony, The etrailer Hard Tonneau Cover #e55DR does not come with a built in lock, but if you lock the tailgate of your truck then no would would be able to open the cover without damaging it or the tailgate.

view full answer...

Answer 11

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 12

Hey Dan, for your 2023 Chevy Silverado 2500 the SumoSprings kit part #SSR-203-40-2 would be your best option as they have the best capacity to match what you'll be towing. I also really like that they are two piece. Are you wanting a…

view full answer...

Are There Other Brackets to Lower Factory Running Boards on a 2022 GMC Sierra or What Can Be Done

Continue Researching