Do Dexter and Lippert 7k Axles Use the Same Bearings
Published 06/14/2023
Products Featured in This Question
Question:
looking to replace lippert 7k straight axle with dexter 7k axle beam will hubs and bearings from lippert axle work on dexter
asked by: Don V
Helpful Expert Reply:
Yes, Lippert and Dexter 7k axles use exact same bearings. The only issue you might run into is a difference in grease seal size required. There are two sizes of grease seals that fit 7k axles and there isn't a rhyme or reason as to which you may have/need. So if the spindle diameter if 2.2250 inch where the seal rides the correct seal you would need is the part # GS-2250DL or if it's 2.125 inch you'd instead need the part # GS-2125DL.
Product Page this Question was Asked From
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.13 Inch I.D.
- 3.38 Inch O.D.
- etrailer
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Right Hand - 6,000 lbs
- Article: How to Measure a Trailer Axle
- Shop: Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand - 6,000 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: Dexter 3-Leaf Slipper Spring w Radius End for 22,500-lb Hutch Trailer or Dexter HDSS Suspension
- Shop: Bright Way Trailer Breakaway Kit with Switch and 0.5-Amp Charger
- Q&A: Difference Between Idler and Braking Axle
- Q&A: Axle Wall Thickness of Dexter Axle part # 7461121
- Q&A: Does it Matter Which Way a Double-Eye Trailer Leaf Spring Faces
- Q&A: Axle Recommendation with 74 inch Spring Center Dimensions
- Q&A: Can 7-14.5 Tires Be Upgraded to 8-14.5 Tires for Utility Trailer
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Q&A: What's Needed To Upgrade From 5,200 Lb to 7,000 Lb Trailer Axles
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Search Results: l44649
- Video: Checking Out the Dexter Trailer Axle Beam with EZ-Lube Spindles
- Video: A Closer Look at the Dexter Trailer Axle Beam with EZ-Lube Spindles
- Video: The Low-Down on the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
- Search Results: lippert axle
- Search Results: axle