When you’re hauling serious weight, the suspension has to be up to the job. This Dexter 3-Leaf Slipper Spring gives your heavy-duty suspension a solid foundation with a spring capacity of 11,250 lbs per side and a 22,500-lb axle rating. It connects directly to the Hutch or Dexter HDSS suspension system to keep your trailer tracking straight and stable under load.
Rough roads and uneven surfaces don’t have to mean a harsh ride. The three-leaf design flexes to absorb bumps and vibration, cutting down on bounce and sway. That flex helps the axle move independently of the frame so the trailer stays level and parts last longer.
A spring that carries heavy loads needs to stay strong over time. This one is built from sturdy steel that stands up to weight and wear. With a 3" width and 7/8" leaf thickness, it’s made for long-term durability in demanding conditions.
This spring is made specifically for heavy-duty suspension setups, matching the geometry and strength of Dexter HDSS and Hutchens 9600-9700 Series systems. At 44-1/8" overall length and 41-1/2" from radius curve to hook (unloaded), it installs right where it’s supposed to for proper axle alignment and reliable performance.
To keep alignment and suspension performance consistent, it’s best to install new springs on both sides. Doing so ensures even flex and prevents mismatch from worn components, keeping your suspension balanced and your ride smooth.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this Dexter three-leaf slipper spring with the radius ends for a 22,500 pound Hutch trailer or the Dexter HDSS suspension systems. Now, this slipper leaf spring will act as part of your trailer's suspension system. This will provide the attachment point for your trailer's axle. This has multiple leaves, which will allow flexibility to absorb road shock.
This one has a total of three leaves. It does allow for a nice, smooth ride, reduces wear and tear on the trailer, and it ensures a level ride on bumpy and uneven surfaces. Now, this one is a slipper spring on both ends. It is designed for use with the 9600 and 9700 series Hutch trailer suspension systems or the Dexter HDSS suspension systems. The slipper end on both ends will slide into a hanger and equalizer.
This is a sturdy steel construction. It is for a quantity of one leaf spring. Now, the spring capacity for this one spring is 11,250 pounds, so this is designed to fit on an axle that has a capacity of 22,500 pounds. Few measurements on this, the overall length from one end to the other end is 44 1/8 inches. And the length from the top of the radius curve to the top of the hook curve is 41 13/16 of an inch.
And the width on this spring is three inches. But that should do it for the review on the Dexter three lifts, three-leaf slipper spring with the radius ends for the 22,500 pound Hutch trailer or Dexter HDSS suspension system..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Easy to find and get the right parts
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.