How To Find Correct Replacement Door Hinge for Enclosed Trailer

Question

Question:

I have a 2006 Carry-on 6x12 enclosed trailer. Is there a companies that has similar parts? Door hinges?

asked by: Bart J

0

Expert Reply:

We do offer door hinges for enclosed trailers, in order to choose the correct one you'll need to note the type and measure its length. The T-Strap Hinge for Enclosed Trailers part # PLR3408 for example is a t-strap style hinge which measures approximately 9-5/8.

I have attached for you below a full list of our hinge options from various manufactures.

expert reply by: Conner L

0

Answer 1

I went out to our warehouse and measured the T-Strap Hinge for Side and Rear Trailer Doors #PLR3408. The distance from the center of the mounting hole to the center of the closest strap hole is 3 inches. The distance from the center of the 1/2 inch…

view full answer...

Answer 2

I would be happy to help you find the correct replacement door hinge for your 2000 Sooner Royale Horse Trailer, but I was unable to find any dimensions or information about the 03139010 hinge you mentioned. Based on the picture you provided it looks…

view full answer...

Answer 3

Hey Mathieu, it's generally not a problem to use a stainless steel hinge on an aluminum trailer but if you wanted to never worry about galvanic corrosion you'd just need to use an isolator to prevent contact between the two metals. We use…

view full answer...

Answer 4

I went to our warehouse and measured the Polar Polished Stainless Steel T-Strap Hinge #PLR3408-PS to get the dimensions you need. The two holes on the square/door jamb end of the hinge are 3/8-inch in diameter. Their center-to-center hole spacing is…

view full answer...

Answer 5

I recommend going with the Polar Wide Bracket Strap Hinge #PLR2008-AS. The strap is 8 inches long and has 3 holes to install on the door as well as 3 mounting holes on the bracket. The hinge is also made out of aluminum so it will have superior…

view full answer...

Answer 6

Polar does not give specific weight capacities for their hinges as the dimensions of the door would make a specific number too difficult to state as well as different applications might carry the weight differently. Like if you had a 20 lb door that…

view full answer...

Answer 7

Hey Doug, thanks for reaching out! The T-Strap Hinge for Enclosed Trailers #PLR3408 doesn't have a weight capacity. We've reached out to Polar a number of times about this, but they always come back with there is no weight capacity.

view full answer...

Answer 8

Yes, it is okay to use the 10 hole Cushioned Pintle Mounting Bar, part number AMPC3, in the rise position and use the top four holes to mount your ring, as long as you stay within the weight rating of the ring, mounting bar, hitch and towing vehicle,…

view full answer...

Answer 9

Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…

view full answer...

How To Find Correct Replacement Door Hinge for Enclosed Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching