Correct Replacement Camera Antenna for Voyager WAOM562 Backup Camera System

Question

Question:

I HAVE A VOYGER BACKUP CAMERA ON MY RV AND I BROKE THE ANTENNA OFF THE CAMERA MODEL NO. WAOM562 CAN I GET A REPLACEMENT FOR IT

asked by: Bruce M

0

Expert Reply:

The correct replacement camera antenna for the Voyager WAOM562 Backup Camera System is the Replacement Wireless Antenna for Voyager Backup Camera System part # PXXHD0006301R which fits the Voyager WVCMS130AP Camera.

expert reply by: Conner L

0

John

3/22/2024

Is there an extension antenna that can be put on the monitor screen? It seems I can’t hold the signal.

Reply

Mike L.

4/10/2024

@John Unfortunately, there's not. You'll want to make sure that the camera unit is placed as high as possible on the back of the RV so the antenna extends a bit over the level of the roof. That'll ensure you get the best possible signal at the monitor.

Reply

Answer 1

Hi Lynda, The distance between the camera and monitor shouldn't be more than 60' for your setup so I would check the voltage getting to your camera. A weak signal is usually a sign that the running light circuit isn't providing enough…

view full answer...

Answer 2

From what I was able to find on your Voyager WV0S511 (discontinued) there were two different style of cameras that were used. One of which used a straight antenna like the Replacement Wireless Antenna for Voyager Backup Camera System #PXXHD0006301R…

view full answer...

Answer 3

The replacement antenna for the Voyager WiSight Wireless RV Backup Camera Monitor #WVOM541AP is part #VO54FR on our site. If you're looking for the replacement antenna for the camera #WVCMS130AP instead then that would be part #PXXHD0006301R that…

view full answer...

Answer 4

The Torflex Lift Kit #K71-724-02 is meant specifically for the #11 Torflex axles and attaches directly to the side mounted brackets on your trailer's frame without any additional hardware. This kit works with Torflex Axles with a 4,100-6000 lb…

view full answer...

Answer 5

The 2500 lbs reference on the Stromberg-Carlson electric A-Frame Tongue Jack #JET-2500 is the tongue weight of your trailer. As long as your trailer's tongue weight is less than 2500 lbs, then this jack will work well. The 2500 figure is the…

view full answer...

Answer 6

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 10

Hello Stu, thanks for getting in touch. For a travel trailer approved e-bike rack, what I recommend is the Swagman E-Spec Bike Rack #S94FR. This rack has a reenforced shank, making it suitable for RVs and travel trailers. It has a 70 lb per bike…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Correct Replacement Camera Antenna for Voyager WAOM562 Backup Camera System

Product Page this Question was Asked From

Continue Researching