How To Find Correct Replacement Bearings and Hub/Rotor for Mastercraft Trailer

Published 10/11/2022

Products Featured in This Question

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2690)

$15.39

Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs

(87)

$505.25

Question:

I need a wheel hub for my Mastercraft boat trailer. PArt #4130

asked by: Craig C

Expert Reply:

I do have a few options for you to help with identifying the bearings on your trailer but I can't look up Mastercraft part numbers. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the bearings based off industry standards. For example, a 3,500 lb axle uses L68149 and L44649 bearings like what comes with the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles part # BK2-100 or the Kodiak Disc Brake Kit part # K2HR35D (Please note, if you have disc brakes you'll need a new kit to ensure compatibility.). The other option would be to take the hubs off the trailer and either read the part numbers off the old bearings or measure them with a dial caliper to the nearest thousandth of an inch. I have attached an article that goes over this process in more detail.

I have also attached a few links with lists of our bearing and hub selection.

expert reply by: Conner L