Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 14" x 6" steel wheel is made for real-world towing duty. With a 1,870-lb capacity and sturdy steel construction, it meets Department of Transportation standards so you can trust it under load. The zero offset keeps the wheel centered over the hub, giving a balanced footprint when carrying weight.
Saltwater, rain, and road grime can ruin a lesser wheel. This one uses a galvanized finish that resists rust and corrosion far better than bare or painted steel. It stays shiny and easy to clean thanks to the protective zinc layer that seals out moisture, making it ideal when long-term durability matters most.
No guessing about compatibility here. The wheel uses the common 5 on 4-1/2" bolt pattern with a 3.19" pilot diameter and accepts standard 1/2"-20 bolts. That combination delivers simple mounting and dependable alignment on standard hubs without extra adapters or modifications.
Everything you need for setup is built in. The wheel includes a 0.453" valve stem, so once your tire is mounted and aired up, it’s ready to roll. It’s a straightforward piece of hardware that saves time and gets you back on the road faster without hunting for small parts.
The modular spoke design isn’t just for looks—it adds strength where it counts while keeping weight down to a manageable level. The 14-inch size pairs easily with common trailer tires like ST205/75R14 or ST215/75R14, giving you flexibility to match your load and terrain while keeping a solid, balanced stance every trip.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Americana 14-inch by 6-inch galvanized modular design steel trailer wheel with a five on 4-1/2-inch bolt pattern. Now this tire wheel assembly is designed for use in marine applications. The wheel is a sturdy steel construction, has the modular design, which when we say modular design, that's the one that has the round holes all the way around the wheel. And we mention it's a galvanized finish on the wheel that's designed to protect the wheel from rust and corrosion when unloading your boat in the water. This galvanized finish is not the best looking finish, but it is the best finish for protection.
It is a high-quality wheel, does meet the DOT, Department of Transportation, specifications. Now, if you notice, it does not come with a center cap. If you do want a center cap, we do sell those separately on a website. You do wanna make sure to get a center cap that'll have the same diameter as this pilot hole 'cause you're a center cap will install into this hole. The diameter on this pilot hole is 3.19-inches.
Now we are gonna measure the diameter and the width of the wheel. And the diameter, when you measure on a wheel, is always inside to inside. Because what you're measuring is the, where the tire bead will seat on the wheel, the tire bead seat right here. So you're measuring bead seat to bead seat. So the diameter on this, if we put a tape measure on it, you'll be able to see there's your 14-inch diameter.
The width is the same way you're measuring bead seat to bead seat. So inside to inside, there's your 6-inch width. And we mentioned the bolt pattern on this is a five on 4-1/2-inch bolt pattern. If you wanna measure a wheel, that's an odd number of lugs, in this case, five. What you have to do is pick one of the holes, let's say this one, and then you're gonna measure across to either one of these.
But when you measure, it's from the center of the starting hole to the furthest edge of whichever hole you measure to. So on this, if we measured it be 4-1/2-inches, so that means it's a five lug, 4-1/2-inch bolt pattern. Does use a wheel lug size of 1/2-inch by 20, and the weight capacity on this wheel is 1,870 pounds. Now also always remember that if you have any questions regarding this product, please don't hesitate to contact us via phone chat or email or if you've even purchased this product, please send us pictures of it being used. But that's gonna do it for the review on the Americana 14-inch by 6-inch galvanized modular design steel trailer wheel with the five on 4-1/2-inch bolt pattern.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Phillip
12/4/2020
Still working every day
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bernie
12/8/2020
Still pleased with my purchase.