Correct Weight Distribution System Rating for 1,200 lb Loaded Trailer Tongue Weight
Question:
We just bought our first camper from some friends and the trailer came with a weight distribution hitch with a max tongue weight of 1000 lbs. Our trailer tongue weight is 1208 lbs. I’m assuming that’s not good. Should I buy one with a max weight of 1200 lbs or one in the 1400 lb range? Sorry for the dumb question.
asked by: Jake T
Expert Reply:
Weight distribution can be a bit confusing so don't feel alone in trying to figure this out!
You are 100% correct that the 1,000 lb system isn't rated high enough. Going with something in the 1,400 lb range like the Curt # C17063 you were looking at is more in line with what you're needing since you want the loaded tongue weight of your trailer PLUS the weight of anything behind the rear axle of your tow vehicle to fall in the middle of the tongue weight range of your weight distribution system.
The Curt MV is a decent weight distribution system but I usually recommend against using the friction sway control brackets simply because you have to disconnect it prior to backing up. For something that's rated properly and uses an integrated sway control I recommend checking out the Blue Ox SwayPro # BXW1500.
Attached are some review videos for you to check out.

Products Referenced in This Question
Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Severe Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Blue Ox
more information >
Product Page this Question was Asked From
Curt Round Bar Weight Distribution System w/ Friction Sway Control - 14K GTW, 1.4K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Does Not Allow Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Will Equal-i-zer Weight Distribution Brackets Sit Low Enough for Generator Box Door Clearance
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Mounting Hole Spacing For Square D-Ring Tie-Down Anchor ABS69FR
- Q&A: Can a Unibody Vehicle Use Weight Distribution or Sway Control?
- Q&A: Recommended Backing Plate for the Square D-Ring Tie-Down Anchor ABS69FR
- Q&A: Best Weight Distribution Hitch For 2025 R-Pod 171
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Availability 7-Way Round to 4-Way Flat Adapter
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Weight Distribution System for a Nucamp Tab 400
- Article: Trailer Wiring Diagrams