Replacement Fender for Single Axle Escort Boat Trailer

Updated 10/27/2024 | Published 07/18/2022

Products Featured in This Question

Single Axle Trailer Fenders w Mounting Brackets - White Plastic - 13" to 15" Wheels

(30)

$258.58

Mounting Bracket for Optronics A91, AL82, AL90, AL91, or AL191 Series Lights - Open Back - Black

(124)

$9.19

Grommet for Optronics A91, AL82, AL90, AL91, or AL191 Series Trailer Lights - Black PVC

(404)

$8.39

Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber

(2432)

$14.84

Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)

(34)

$41.04

Plastic, Single-Axle Trailer Fender w/ Top and Side Steps - White - 13" to 15"

(55)

$157.42

Question:

Hey need some help with finding the correct white fender for my boat trailer. It’s the left side fender if sitting in the boat looking forward. The brackets are bent as well so will need them too. The brackets have a stud that go through the trailer square tubbing which is 2”x4”. If you don’t have those style brackets I would like to get two new fenders and the brackets and U-bolt clamps as well. And lights for them too. My trailer vin number is 405120BAX1C000142. It’s says it’s an escort chief maybe on it. Hard to read. My registration only says chie on it. And the tires on the trailer are 15”. Thanks for the help in this matter. Looking forward to hearing from you.

asked by: Seth C

Expert Reply:

The only white fenders we have that will fit your 15" wheels are the # PF11X35W-2. We also have reports that this was a match for a 2000 Escort boat trailer, so it is likely this is the same part. If you decide you only want to place the one fender we do have a single fender available as well # PF11X35W.

We don't have the same mounting bracket style so you would need the # PF1135-BKT-2. The mounting holes on the brackets are 3-5/8" apart so you would need to acquire U-bolts from your local hardware store that match the holes and will fit around your frame.

For lights, you can use the Thinline LED Clearance and Side Marker Light # AL91AB. Depending on how you want to mount them to the fenders, you can use a grommet # A91GB or bracket # A91BOB.

I have attached some review and installation videos for your reference.

expert reply by: Robin H

Rick R.

10/27/2024

I need the front mounting bracket for my 2007 escort single axle trailer. Any information is greatly appreciated.

Robin H.

10/27/2024

@RickR is this a mounting bracket for a fender? We don't have a way of knowing what is on your trailer but you can look at our available mounting brackets to see if any match. I went ahead and attached a link to all of our available brackets below for your reference.

Helpful Links

dept-pg-accessories_and_parts-sf-trailer_fenders-pt-mounting_hardware-pc-brackets.aspx

Rick R.

10/27/2024

@RobinH I had to cut the left support off because I couldn’t move the trailer.