Recommended Axle Kit For A Boat Trailer With A 48 Inch Hub Face
Updated 06/28/2022 | Published 06/26/2022
Products Featured in This Question
Question:
I need for an axle kit for a small trailer with a 48 inch hub face and 38 3/4 inch spring center? I need an axle kit for this. Do you have one? Thanks!
asked by: Bud
Expert Reply:
When it comes replacing the trailer axle on your boat trailer that has a 48 inch hub face I would recommend The Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 pounds # ASR3500S05.
This axle-less system provides a smooth, quiet, safe ride and can eliminate the need for an axle, which allows for maximum ground clearance and a low deck height. This system will fit any frame width. This kit has a heavy-duty steel construction that has a black powder coat finish that resists wear and corrosion. It is easy to install and align. You can either bolt or weld to your trailer's frame.
This system it meant for a 1-axle or 2-axle trailer and is not recommended for triple-axle applications. The hubs needed for the kit need to have an inner bearing # L68149 and an outer bearing # L44649.
The Timbren Axle-Less suspension system may require additional support on your trailer. If your trailer does not have a crossmember above the spot where you want to install the Timbren system, then you may need to reinforce the frame on your trailer. You can do this three different ways:
-You can retrofit the trailer with a crossmember
-You can build out the trailer frame
-You can use a standard, 2-inch steel tubing to connect the 2 Timbren suspensions together using the built-in square hole on each unit.
I attached a review video link below.
Product Page this Question was Asked From
Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2200 lbs
- 5 on 4-1/2 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 4 keel roller
- Video: Ultimate Overview of the Roller Shaft with Pal Nuts for Boat Trailer Rollers
- Q&A: Axle Replacement 1720 Harbor Freight Trailer
- Q&A: Trailer Axle With Spring Center To Spring Center Measurement Of 48
- Shop: CE Smith Light Duty, Vertical Bunk Bracket - Galvanized Steel - 7-1/2" Tall - Qty 1
- Shop: Demco Straight Tongue Trailer Coupler - eZ-Latch - Silver - 2" Ball - Bolt On - 10,000 lbs
- Shop: Yates V Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 5" Long - 1/2" Shaft
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 5,000 lbs
- Shop: Roller Shaft with Cap Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 5-1/4" x 1/2"
- Shop: CE Smith Keel Roller for Boat Trailers - PVC - 5" Long - 5/8" Shaft - Amber
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lbs
- Q&A: Recommended Parts for Rebuild/Upgrade of Harbor Freight Trailer
- Q&A: Replacement Slipper Springs for Triton LTWCI Trailer
- Q&A: Dimensions of Spindle on 3,500 Pound Dexter Trailer Axle
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Q&A: Replacement Boat Trailer Axle w/ a 72" Hub Face
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Article: How to Measure a Trailer Axle
- Article: How to Measure a Boat Trailer Axle
- Article: How to Change the Axle on your Boat Trailer Without Leaving your Driveway
- Article: How to Tell the Weight Rating of a Trailer Axle