Recommended Trailer Wiring Harness For A 2017 Chrysler Pacifica
Updated 05/05/2022 | Published 05/03/2022
Products Featured in This Question
Question:
I have a chrysler 2017 that I would like to tow a small camper with. I need to install wiring for the camper. The camper has a 7 pin connnector. Please advise.
asked by: Brian S
Expert Reply:
When it comes to installing trailer wiring on your 2017 Chrysler Pacifica The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118712 is confirmed to fit your vehicle.
The trailer harness has a simple plug and play installation that plugs into your vehicle's wiring harness, which is located behind the driver and passenger side tail lights. The harness will come out as a 4 pin flat connector.
To make the 4 flat connector to a 7 pin round connector The Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7 is needed. This piece will attach to your 4 flat connector and make it into a 7 round and 4 way flat. Three additional wires will be included as follows:
Black - 12V hot lead
Blue - Electric Brake
White - Ground
If your trailer has brakes then a brake controller is needed. The Redarc Tow-Pro Liberty Brake Controller - Proportional # RED24FR will work for you. This controller can be installed in an out of the way spot so its not taking up space on your dash board. The control knob is visible on the dash to help control the controller. This controller has a 3-axis accelerometer that measures deceleration in all directions for precise braking and a smooth, uniform stopping action. The Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR.
I attached an installation video link below.
(click to enlarge)
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: hitch pins and clips
- Shop: Trailer Wiring
- Q&A: 7-Pin Wiring Harness Compatible with 2017 Chrysler Pacifica Hybrid?
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Shop: Mounting Bracket 4-Pole Flat
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Towing Capacity for 2018 Chrysler Pacifica and Recommended Trailer Hitch and Wiring
- Q&A: What Hitch for 2017 Chrysler Pacifica Has Best Ground Clearance
- Q&A: Hitch Opening Down to the Ground on Draw Tite Hitch part # 76046 for 2017 Chrysler Pacifica
- Q&A: Recommended Trailer Hitch And Wiring For A 2018 Chrysler Pacifica L
- Q&A: Replacement for Reliable Brake Actuator on Mastercraft Boat Trailer
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Maintenance Schedule
- Article: Trailer Hitch Installation Tips