7-Way Trailer Wiring Harness Replacement For A 1995 Ford F-150  

Thanks for reaching out and providing a photo, Christian! Instead of getting the plain Hopkins Connector #HM40975 what you need is the Hopkins Kit #HM40975-11998 which not only has the exact same 4-Way/7-Way connector system, but it also has the…

For your 2016 Chevy Colorado without trailering package I recommend the 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring - Vehicle End #HM40975-11998. This will come with the wiring pigtail and everything you need. I…

Hey John, thanks for reaching out! If the 4-Way on your 1996 Ford F-150 is from the factory then the only wire splicing you'll need to do is with the Adapter #37185, which plugs into your 4-Way and then you'll connect the rest of the wires to…

Hey Ryne, yes we sell the industry standard fifth wheel rail kits separate from our hitches but for some reason we make them harder to find than they should be. So for your 2024 Chevy Silverado 2500 you would want the part #C16429-204. Do you have a…

Hi Adam, The Brophy Stake Pocket Mounted Camper Tie-Downs #TDSF don't technically have a weight capacity, though the turnbuckles they need, the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs #TDHP, have a 3,000 lb weight capacity. So…

Hey Rich, The B&W Patriot 5th Wheel Trailer Hitch #BWRVK3200 weighs 143.7lbs and the B&W Custom Installation Kit w/ Base Rails #BWRVK2500 weighs 79.11lbs. If you're concerned about the amount of weight on the rear axle we can look into…

You have a deep drop bumper installed on your 1996 Ford F-250 so the B and W Hitch part #BWHDRH25198 that you referenced would fit and work well on your truck. Check out the install video I attached that shows this hitch being installed on a similar…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I recommend using the Pollack Replacement 7-Way Trailer Connector Socket, #PK11893, and the 4ft Pigtail Wiring Harness, #PK11998. The screw holes for the 7-way socket are 2-1/2 inches x 1-3/4 inches, which match your specification. I have attached a…